Painting Aquarium Backgrounds

A simple colored background is a great way to spruce up a fish tank, but not always as simple to install as you might imagine. New purchasers of aquariums are normally so excited to set up their tank that they usually opt to buy tape-on backgrounds to speed up the process. Once the aquarium is full of water, disappointment sets in. The laminated background that once looked so promising is now just a bubbled and crinkly looking backdrop taped to the back of the tank. The problem is that tape-on backgrounds just never get flush enough to the glass to look uniform and professional. So how do you get a solid fish tank background color? The answer is easy! You paint one. This article will explain how to achieve professional looking background colors by painting the outside of your aquarium.

_________________________________________________________________

Painting Your Aquarium -

Painting the outside of your aquarium is surprisingly an easy process that takes only a day to complete. Since you are applying paint to the outside of your aquarium, a wide variety of paints and colors may be used. I've only shown tanks with black painted backgrounds, but you can do whatever color you wish. The background color will not only look great, it will never be toxic to your fish as it is on the outside of the tank!

The photos shown above and below are examples of how a painted background aquarium looks with and without water. Both photos belong to Nat Tarbox and have been released under the Creative Commons Attribution License.

Aquarium Painting Supplies -

  • Empty Aquarium
  • Rubbing Alcohol
  • Blue Painters Tape
  • Newspaper
  • Paint (I use Black Spray paint)

Aquarium Background Paint Process -

  1. Use the rubbing alcohol and a towel to clean the pane of glass that you wish to paint. The rubbing alcohol will remove any dirt and grease so that the paint will adhere properly.
  2. The next step is to cover all areas of the tank that you wish to not be painted. Cover it all and make sure to cover the open end so that no paint gets inside the tank. You'll end up with a big newspaper box with one exposed glass side.
  3. Working outdoors, spray the paint lightly and evenly onto the aquarium glass. Putting on several light even coats of paint is preferred. One thick spray will run and drip, so take your time.
  4. Allow the paint to dry for one day. After one day, remove all the tape and continue to set up your aquarium!

_________________________________________________________________

Final Word -

By taking the time out to paint instead of taping on your aquarium background, you'll end up with a very eloquent and visually pleasing tank! Is it worth it? I sure like to think so. To the right is one of my former 10 gallon aquariums in which I painted the background black. No wires could be seen through the tank and the black really helped make the rock scene pop! So go ahead, try painting your next aquarium background. It'll really make a difference. Thank you for reading my article on painting aquarium backgrounds. If you're in the hunt for something even more exciting, have a look at my DIY 3-D Aquarium Backgrounds.

More by this Author


Comments 6 comments

InterestCaptured profile image

InterestCaptured 4 years ago

Glass is semi-permeable, and I was under the impression that you are not supposed to use certain chemicals (e.g. windex) on the outside because of the possibility that it could seep in. Do you think this is the case with paint as well?


phoenix2327 profile image

phoenix2327 4 years ago from United Kingdom

Very good hub. I imagine you can get really creative with backgrounds using the method you've described.


leann2800 4 years ago

Such a simple solution. I have never really thought to painting the outside but I think it is a clever idea.


Joe Macho profile image

Joe Macho 4 years ago from Colorado Author

InterestCaptured - It's a good point to bring up, but I'm almost 100% sure that glass is not semipermeable. Otherwise there'd always be water that would leak through the glass. It is not recommended to use Windex because when you spray it, the mist can get into the aquarium. I've had many painted tanks and never had a problem!

phoenix2327 - Thanks for your feedback. I'm sure that you could get super creative if you wanted. Checker boards or modern Picasso aquariums could be painted;)

leann2800 - It seriously is a simple solution! One that works too!


Xenonlit profile image

Xenonlit 4 years ago

This is cool. Well done.


Joe Macho profile image

Joe Macho 4 years ago from Colorado Author

I appreciate it Xenonlit.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working