How To Color Stain Wood For Crafts

Colored Wood For Crafting

The grain of wood is often what makes it so attractive to the human eye. We enjoy the natural color and flow. Here I am going to show how to push the grain of wood just a little further than raw and natural by adding colors to the grain. This is not actually painting but rather staining the wood so that color is added for additional enhancement.

This technique can be used when crafting on many different projects. It is easy to learn and can add another visual dimension. It holds the natural beauty of the wood grain, yet adds flare to the finished product. The technique can be used in very small amounts when crafting or it can be used to finish large pieces of wood.

Coloring wood grain can be done for craft projects but it can also be done on wood furniture and even used to color the grain on walls and floors made of wood. That being stated let's take a closer look at what is involved to achieve interesting colored grain for all sorts of creative wood projects.

Tools and Materials for Color Staining Wood

The Basic tools and materials for most color staining projects are going to be the same. That does not mean that other supplies are not needed for specific projects. This is a basic starter guide about color staining wood. Keep in mind that this is meant to be adapted to the project you are working on. Some additional things might be needed for your exact situation.

Basic Tools and Material Supplies

  • acrylic paint
  • brushes sized according to your project
  • a container for water
  • a paint tray, this is a great chance to use recycled items such as the lid to a plastic container as seen in the photos
  • your wood project, ready to be color stained
  • a blotting cloth



Getting Started Color Staining Wood

First I would like to suggest that if you have never painted on raw wood before it is very wise to do a bit of practice staining before you jump in and start on a finished work that is ready to stain. There are a few things to learn about how the color stain will act as it is applied to the wood.

The most important thing to note is how the raw wood will absorb the color stain. The wood will act as a wick and draw the stain into the porous wood surface. This can create a problem if the color bleeds out too much and the color runs to an area you DO NOT want colored or not the color you are applying at the time.

Practice! Get to know the feel of how the wood will react to the color stain. Another thing I want to mention is that if a mistake occurs and the color does wind up in a place where you would rather not have it, this can be remedied to some extent by fast reaction on your part.

Using a blotting cloth the color can be removed to a certain extent. This can also be done with a dry paint brush in very small areas. Dabbing the unwanted color while it is still wet will help to clean the unwanted color stain off. More color can be removed by adding additional water to the mistaken area and dabbing it more after blotting the majority of the stain. The idea is to rinse and dry, rinse and dry. It would be a good idea to practice removing color stain as well as applying it. Better to be prepared in advance.

Making Color Stain For Wood

The example here and photos are based on working on a craft project that will not require large volumes of stain. Here the suggested methods are for smaller, brush load amounts of stain. The term "brush load" referring to the amount of color stain that is held in the wet brush you are using. For large projects like a piece of furniture, a wall or floor it would require mixing very large batches of color stain. This can be done but I do suggest much practice before going that route.

Start with Water

Add enough water to more than cover the area you wish to stain. I am showing examples so I started with a couple brush loads of water. Off to the side of the water I dropped a small dab of acrylic paint. Second, mix just enough of the paint to color the water. See the photos for better understanding. Do not add too much.

It is better to add more water and less paint. If the finished color does not come out as dark as you would like you can always add a second coat to darken the color when the first coat dries. remember if the color is too dark or goes where you do not want it to, use your blotter as I suggested above. The idea is to stain the wood with color but allow the grain of the wood to show through the stain.

Mixing Color Stains

Colors can be mixed directly in the paint tray. This is a good way to conserve on paint if you understand color mixing and the basics of a color wheel. Yellow and red make orange as shown in the photo.

The same color can also be reached by first applying a wash of yellow and then adding a wash of red across the top of the yellow.see how that came to be in the photo. this can be done for all basic color mixing. It can be done in the tray or on the actual piece of wood.

Wet Color Stain Will Bleed

Note by looking very close at the photos. All of the colors were added at about the same time. This meant all of the colors were wet or at least damp. See how the color stains bleed into each other when they are wet? This will not happen if the stain is completely dry before adding a second color.

Now it might be that you want the colors to bleed and that is fine. It is up to your discretion. It might be that you prefer to have control of the color stain and want to place it in exact locations on your project. If that is the case, make sure the stain is dry.

The drying time will vary depending on the humidity and the temperature. You can always speed drying tome by using a hair dryer to gently blow dry the area in question. A Word Of Caution...

The air from the blow dryer can move the color stain if it has not completely absorbed into the wood. Make sure there are no puddles on your work before you start blowing on it with a hair dryer.

Practice Your Technique

You can add wonderful flare with this basic technique. With a bit of practice you can blend and mix colors on wood and allow the wood grain to show through with great satisfaction for the end result. different woods have different grains. Some wood is harder to stain than others. This is where practice makes perfect for your next color stained wood project. Experiment and have fun crafting.

More by this Author


Comments 17 comments

C.S.Alexis profile image

C.S.Alexis 4 years ago from NW Indiana Author

jbosh,

yes all the information the better, never took it as a negative, glad you commented! Thanx!!!


jbosh1972 profile image

jbosh1972 4 years ago from Indianapolis, IN. USA

Your welcome! By no means was I being critical of your article. I will be trying this with craft paint AND artist paint. I just posted that tidbit for all of your readers. The more informed they are the more ingenious experiments they are capapble of.


talfonso profile image

talfonso 4 years ago from Tampa Bay, FL

I am considering color staining wood! I have tons of acrylic paint lying around, but I might need to get Claudine Hellmuth's studio paints just for that project because it has less fillers, making the stains more translucent. I heard about them on YouTube and the Ranger website, but here's hoping that I can find them at Jo-ann! Otherwise, it's worthwhile to do with regular paints.


C.S.Alexis profile image

C.S.Alexis 4 years ago from NW Indiana Author

Josh I have used metallic paints for this and you still get the glitter but the color is different. Yes there are better paints and you are right about that but for a weekend artist the craft paints work out okay with less money invested. Thanks for commenting and stopping in to read my write.


jbosh1972 profile image

jbosh1972 4 years ago from Indianapolis, IN. USA

I like this. Wonder how metallic craft paints will work?Did you know that the artist acrylic paints are more translucent that craft paints? Craft paints are good for many projects but the pigments have fillers and they are almost always opaque.


ardenfr profile image

ardenfr 4 years ago from Lubbock, Tx

Very nice article. I had tried this before on a project of mine and it turned out nice. I would like to suggest that the water may raise the grain abit but a light sanding with 220 or 320 grit sandpaper will bring it smooth again.


stephhicks68 profile image

stephhicks68 5 years ago from Bend, Oregon

Really great hub - I love finding crafts like these that I can do with my cub scouts. Great photos and explanations!


marshacanada profile image

marshacanada 5 years ago from Vancouver BC

Thanks C.S. Alexis-guess I need to try some staining.


C.S.Alexis profile image

C.S.Alexis 5 years ago from NW Indiana Author

marsha,

I rarely use stains but I prefer the wipe on kind you rub into the wood with a soft cloth.


marshacanada profile image

marshacanada 5 years ago from Vancouver BC

Thanks for your informative well written hub. I do a lot of wood carving mainly West Coast First Firstnation's style.I need to learn lots more about painting and staining. Do you ever use wood stains? I am aiming for a semi translucent effect like I see on some first nations carvings.


cindy.dauer profile image

cindy.dauer 5 years ago from Oregon

I am going to try this!


stampinwithfab profile image

stampinwithfab 5 years ago from London, United Kingdom

Great tutorial, really enjoyed it !


Hello, hello, profile image

Hello, hello, 5 years ago from London, UK

That was fascinating to read, Thank you.


C.S.Alexis profile image

C.S.Alexis 5 years ago from NW Indiana Author

Helpful is what I hope for. Thanks for dropping in to read and leaving positive comments.


KoffeeKlatch Gals profile image

KoffeeKlatch Gals 5 years ago from Sunny Florida

Informative and useful. Great instructions and pictures. Rated up and useful.


lyjo profile image

lyjo 5 years ago

What a great hub...very informative, awesome photographs, thanks for the lesson, I love decorating, painting, and have decided that this spring I will be attempting to refinish some furniture! Take care!


SweetiePie profile image

SweetiePie 5 years ago from Southern California, USA

Nice tutorial.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working