How to Build a Man-Size Welding Table from Rebar and Used Bed-Frame Metal for Less than Sixty Dollars

A Man-Sized Welding Table Without the Heavy Weight or the Big Price Tag:

Keep It Simple

Looking for a large welding table to add to your home workshop or small business? If so, then you know that they don't come cheap. A quick search on the popular EBay Website will bring up a number of tables for sale, with prices ranging from $75 for small used tables to prices exceeding two-thousand dollars for commercial-sized models. Even after you find a suitable table and make the expensive purchase, you will have to deal with the extra expense of freight-truck delivery or gasoline for the pickup, in what may become an all-day road trip.

A better option for those with welding skills is to make their own table. A light-weight and functional welding table can be constructed easily using rebar from the local hardware store and used-metal bed frames that can be purchased for a few dollars at garage sales and thrift stores. Once the components are cut to size, a good welder can assemble and weld the table together in just a few hours.

Let's Get Started:

The materials list to build the table you see in the photographs is remarkably simple. In fact, you will only need to purchase three sets of items:

Six- Ten foot sections of 1/2 inch metal rebar.

Four- Metal bed rails made in the shape of a "L."

One-Box of welding rods (welder's choice).

Fabrication Cuts:

Use a chop saw or metal band saw to make the following cuts:

Cut twenty-seven segments of rebar into twenty-inch long pieces (for table surface).

Cut two segments of rebar into twenty-one inch pieces (for side cross-support of legs).

Cut one segment of rebar into a fifty-seven inch segment (for rear cross-support of legs).

Cut two bed-rail segments into twenty-one and one-half inches each (top frame, side pieces)

Cut two bed-rail segments into fifty-seven inch pieces (top frame, front and rear pieces).

Cut the remaining bed-rail into four equal length pieces at the desired height of your table (the table photographed is thirty-five inches tall).

Table Top Assembly:

Weld the top bed-frame metal into a rectangle with the shelf edge facing inside the frame (like a big metal bowl). I intentionally designed the side-pieces one-and-a-half inches too long so that the side piece will protrude from the rectangle on the left front and the right rear corner of the table top. This allows for a ground clamp area and a convenient place to hang or mount tools (such as the welder's hammer and wire brush in the photo). Verify right angles with a tool such as a carpenter's square before you start welding. Also clamp the piece together to prevent drifting during the weld process.

Once the rectangular frame is welded, use some soapstone and place a mark in two-inch increments all the way down the inside edge of the longest piece. Do the same to the other side. These marks are the locations that you will weld the twenty-inch rebar pieces that will be the surface of your table. It is important to align the marks so that the rebar will be parallel to the metal bed-frames on each short end of the table top. Weld the twenty-inch rebar into position, being careful to check for proper penetration and strength of weld.

The Legs:

Now that the table top is completed, keep it upside down (remember, make a metal bowl). Use the carpenter's square and weld the first leg section into place. Do the same with the other three legs. When you are satisfied that the legs are straight enough, use the cross-support pieces of rebar and weld them into place. These supports were placed twenty-two inches from the bottom of the legs on the table illustrated in the attached photographs.

My Review of This Homemade Welding Table:

I designed this table mainly because it used materials that I could aquire easily and cheaply, and I wanted a welding table that was light enough to move around my shop easily (sometimes I weld outside, and sometimes I weld inside). This table design met these goals easily. I personally spent less than $45 to obtain my materials, and I can pick the table up and move it around without any assistance. Not bad for a table that has a welding surface that is nearly five-feet long and two-feet wide.

The table design also prevents liquids from pooling on the table top and causing excessive corrosion damage. Any bare metal will corrode when exposed to the elements, but by keeping the top porous, this corrosion is kept to a minimum. I also like the advantage of being able to clamp a work piece to the numerous rebar sections lining the top. Bulky pieces (such as sculptures) will rest securely in the two-inch crevices between the rebar table top, and sometimes clamping is not even necessary. For welding smaller pieces of metal, simply place a small section of flat iron on the table top, and work off of the flat iron.

More Welding and Metal Art Information:

I hope that this information has been helpful and will assist you in improving the quality of your workshop or studio. For more information on basic welding terminology and the machines that are used, please see my previous Hubpage on Welding Techniques for Metal Art Newbies. If you are looking for options to expensive welding training in the United States and Europe, please see my Hubpage article on the affordable welding training that is available in the Philippine Islands.

A Full-Size View of the Welding Table:

A Manufactured Table with Similar Features:

More by this Author


Comments 6 comments

lcbenefield profile image

lcbenefield 5 years ago from Georgia

You have such a creative talent! I am enjoying reading about the different art that you make. I hit the useful and interesting button on this great hub.


kryptowrite profile image

kryptowrite 5 years ago from Birmingham, Alabama Author

Thank you Icbenefield. I enjoy making each piece.


Simone Smith profile image

Simone Smith 5 years ago from San Francisco

GREAT guide! I don't know what I'd ever do with a welding table... but now I kind of want one. And hey, if I ever decide to build one, now I'll know what guide to read! Thanks for putting this together.


kryptowrite profile image

kryptowrite 5 years ago from Birmingham, Alabama Author

Thanks Simone, but that would require another article, "How to Build a Lady-Size Welding Table that You Don't Need, but Kind'a Want Anyway." Cool avatar Simone, and thank you for the read and the comment.


jbosh1972 profile image

jbosh1972 4 years ago from Indianapolis, IN. USA

Yes I will have to construct one soon. Might want to point out that metal bed frames can sometimes found in trash or in dumpsters. You may only have the cost of rebar and your time.


kryptowrite profile image

kryptowrite 4 years ago from Birmingham, Alabama Author

Sure. Lots of good metal is thrown away every day. The rebar can also be bought for about 35% less if you can find a local steel supply house that will sell to the public. As for the table, I still use mine almost every day. It is a great little work station outside of my shop. Thanks for the comment.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working