How to Make a Paper Crane, Step-by-step With Pictures
How to Fold a Paper Crane
Folding a paper crane is easy and only requires a square piece of paper. If you choose a large piece of paper, you will end up with a large paper crane. Likewise, if you choose a small piece of paper, you will end up with a small crane. It's important to note that it's much harder to make creases and folds with a smaller piece of paper, so if this is your first paper crane, you might want to start out with a nice, large square.
You can purchase origami paper at a craft store like Jo-Ann Fabric or Hobby Lobby. If you're just trying out origami for the first time, you might want to practice on a sheet of computer paper that you've cut into a square. That way you won't accidentally ruin your origami paper (the first crane is always a mess-up.)
If your paper has a design on one side, you will want to start out with the colored side up.
Fold the paper in half (diagonally) and unfold so that the colored side is facing up again. Then, fold the paper in half (diagonally) in the other direction.
Unfold your paper so that the colored side is facing down.
Fold the paper in half. Unfold so that the colored side is facing down again. Then, fold your paper in half in the other direction. Unfold. Your work so far will look like the image below.
The creases you've made previously are what make this step possible. Bring the top, right, and left corners down to the bottom corner and flatten. Your paper crane should look similar to the image below.
Fold upper layer of right corner inward to the center so that it looks like the image below. Repeat this step with the left corner.
Fold top corner down until it meets the upper section of the fold made in step 5. After this step, your paper crane should look kind of like a diamond as pictured in the image below. Unfold only what you folded in this step.
Turn over your paper crane to-be. Repeat steps 5 and 6 on this side so that your crane looks like the image below.
After all this folding, it looks like your paper crane is really starting to take shape! It doesn't look quite like a crane yet. Sadly, in this step you are going to unfold your paper so that it looks similar to what it did at the end of step four.
Unfold your paper so that it looks similar as to what it did at the end of step 4 (except this time it will obviously have some new creases.)
Note: Step 9 is one of the most complicated steps in making a paper crane, so I've put together three images (to the right) to really show everything that happens in this step.
The first image (9.1) to the right shows the top flap being opened. The second image (9.2) to the right shows one of the sides folded inward. In this step, however, you will need to fold both sides inward. The last image (9.3) shows what your paper should look like at the end of this step. It should be diamond shape and look as if one end has legs.
Here is the step-by-step process for this:
Open the upper flap of the paper. While opening the upper flap, carefully fold both sides inward. The creases made in previous steps will guide you along as you fold. As the paper gets closer to the center, you will feel it "snap" in as if the paper knows it belongs there.
Turn over the paper and repeat open the upper flap of the paper. Carefully fold both sides inward, just like before.
Note: Like step 9, step 10 can be complicated as well, so there are two pictures for this one so that you can more clearly see what I'm talking about.
It's easiest to do this step if you turn your paper so that the "leggy" part of the crane is the point closest to you.
Here is the step-by-step process for this:
Taper the top layer of the right "leg" part (see image 10.1 to see what I mean when I say 'taper.')
Repeat on the left leg.
Turn over your crane and taper both legs on this side.
After the end of this step, you should notice that your crane is starting to take shape and it should look like the image to the right labeled 10.2.
If you're frustrated after steps nine and ten, just know step ten is like the light at the end of the tunnel!
Don't worry, we're not going to unfold it all again! We're finishing up the paper crane very soon!
Fold each leg up at an angle (as pictured below.) Crease the fold really well (if will make the next step much easier.) Unfold only what you did in this step.
Step 12: Tuck the right leg up and inwards (as shown in the image below.) Repeat with the left leg.
Tuck the right leg up and inwards (as shown in the image below.) Repeat with the left leg.
Choose whichever end you wish to be the head and fold it down (as pictured below.) I tend to choose the "less perfect" end to be the head as I find that this last fold tends to hide any tiny imperfections there may be at the tips.
Fold the wings downward and crease.
Under your crane, you will notice a little hole. You can use the hole to gently blow air and "inflate" your paper crane. You now have finished making your paper crane. Congratulations!
Paper Cranes as a Classroom Activity
Making a paper crane is a fun activity for both kids and grown-ups alike. Paper cranes can make for a great classroom activity that is not only useful in teaching children how to follow instructions, but to also teach about world peace using the story of one thousand paper cranes.
The book, Sadako and the Thousand Paper Cranes is a nonfiction children's book by Eleanor Coerr that can be read to children before or after they learn to make a paper crane. The book and the paper crane activity make up a great lesson plan for children learning about peace.
The Story of the Paper Crane
Origami, the art of folding paper, has its roots in Japan. One of the most popular pieces of origami to make is the paper crane. Not only is a paper crane a beautiful example of origami, but according to Japanese legend, anyone who folds one thousand cranes will receive a wish from a crane.
Because of this, paper cranes make great gifts in Japan. After the Tōhoku earthquake in March 2011, people from all over the world sent handmade paper cranes to Japan as a symbol of well-wishing and support of the Japanese people.
In 1945, Sadako Sasaki was two years old when the atomic bomb hit her hometown of Hiroshima. Years later, Sadako was diagnosed with leukemia. While in the hospital, a friend shared the legend of the thousand paper cranes. Sadako then set out to create a thousand paper cranes in order to earn her wish: to live. Sadly, Sadako died at the age of 12 in October of 1955.
After Sadako's death, a memorial statue was created in remembrance of all the children who died from the effects of the atomic bomb. The statue plaque reads "This is our cry. This is our prayer. Peace on Earth."
© 2011 Melanie
More by this Author
Melanie Shebel The herringbone stitch has many names including the Mossoul stitch, Persian stitch, Russian stitch, Russian cross stitch, catch stitch, witch stitch, and even plaited stitch. That's a lot of names for...
A step-by-step tutorial (with pictures) showing how to embroider 5 easy and beautiful stitches. You'll be able to make several beautiful designs and learn the skills to make more complex stitches.
The Michigan Accent & Slang Words. Groups of people from every US state and, really, every place in the world have a unique accent and Michigan is no different! Learn Michigan-isms here!