Forms of Metal Clay: Lump, Powder, Slip, Syringe and Paper Type Clay

Source

Metal Clay = The Magic of Modern-Day Alchemy!

Metal clay is an amazing malleable form of metal that lets you create jewelry, small sculptures and other objets d'art in a range of different metals — pure silver (.999 fine silver), sterling silver (.925 silver), .900 silver (AKA coin silver), 22K gold, copper, bronze, rose bronze, white bronze, brass, steel, pearl grey steel and more — without a lot of costly tools, and even if you don't have any prior metalsmithing or jewelry making experience.

Metal clay is made of microscopic particles of metal mixed with an organic binder and water to create a clay-like material that can be molded, folded, cut, extruded, embossed, rolled, sanded, filed, drilled, carved, etc., to form nearly any shape, design or texture your mind can conceive. After it has dried, it is fired at high temperatures in a kiln (in a container of activated carbon for formulas that contain base metal), with a torch, or over a woodburning or gas stove. The binder burns away and any remaining moisture evaporates, leaving behind just the metal.

You can learn more about getting started with PMC (Precious Metal Clay) and Art Clay in my article Metal Clay - Precious Metal Clay / PMC and Art Clay Silver and Gold. It's a great source of information about metal clay guilds and professional organizations, educational resources, artists, instructors, projects, recommended books, instructional videos, and much more.

PMC (Precious Metal Clay) and Art Clay are the two major brands of precious metal clay. Both offer silver metal clay in different formulas, each of which has different characteristics, and a single formula of gold metal clay. (For more information about the key characteristics of each formula, please visit my article on Metal Clay Brands and Formulas.)

Fine silver metal clay from PMC and Art Clay is available in four basic forms: lump, slip, syringe, and paper-thin sheets (PMC Sheet and Art Clay Silver Paper Type). Gold metal clay is available only as lump clay and slip, and PMC Pro, PMC Sterling and PMC Flex are available only as lump clay.The base metal clay formulas are available only as lump clay or metal clay powder, but can be mixed with water to form slip. While there is no base metal clay available in a syringe, it is possible to mix in enough water to make the clay moist and soft enough to be extruded through a clay extruder. Also, COPPRclay and PMC Flex can be rolled out into extremely thin sheets (1 or 2 cards thick) that remain fairly flexible even when dried, and any type of metal clay (except PMC Flex, which is inherently flexible until heated) can be mixed very thoroughly with a small amount of glycerin to create flexible sheets of clay that behave similarly to silver PMC Sheet and Art Clay Silver Paper Type

This article will focus on the properties and applications of each of the five forms of metal clay.

Lump Clay

Lump clay is the basic and, arguably, the most versatile metal clay form. Because it contains the highest proportion of metal to binder and water, it also is the strongest form of metal clay. Here are some of the many ways in which it can be used:

  • It can be shaped or sculpted by hand.
  • It can be rolled out with a roller (e.g., a piece of PVC pipe) and cut into the desired shape with aspic cutters, cookie cutters, clay cutters, clay punches, brass tubing, a tissue blade or clay blade, a needle tool, a craft knife, a straw, the side of a playing card, or nearly any other cutting implement you can come up with.
  • It can be textured easily by pressing a textured object into it (anything from a piece of lace to a toothpaste cap to a custom photopolymer plate texture), or by rolling it out onto a texture plate/mat/tile.

    Note: See my comprehensive guide to metal clay textures for literally dozens of ways to add fabulous texture to lump metal clay!

  • It can be pressed into a mold, either a commercial mold or one made from 2-part silicone molding compound or polymer clay."
  • It can be carved when leather-hard (mostly but not completely dry).
  • It can be rolled into snakes (AKA coils) or balls.
  • It can be thinned with water to make slip in a variety of consistencies, from thin slip to very thick slips (AKA paste).

Video Demonstration and Instructions for Mixing Hadar's Clay

This helpful video shows you how to mix Hadar's Clay powder into the perfect consistency of lump metal clay.

Metal Clay Powder

The newest form of metal clay

In recent years metal clay in dry powder form has become extremely popular and more and more manufacturers are offering them. Hadar Jacobson offered the first metal clay powder in bronze and copper in her line of Hadar's Clay, which has since been expanded to include a wide range of base metal clay types. Other major manufacturers of metal clay powder include Goldie Clay, which also offers a wide range of base metal clay powder types including the extremely popular Goldie Bronze; Prometheus bronze and copper clay; Metal Mania Metal Clay, which offers a wide range of base metal clay formulas including brass and nickel; NobleClays, which makes silver, copper and bronze metal clay formulas in both lump and powder forms; Zab's Bronzes in a range of colors; and Aussie Metal Clay in a range of base metal formulas and colors in a flexible formula optimized for use when dry with the Silhouette CAMEO electronic cutting machine.

Powdered metal clay is convenient and versatile because it can be mixed with distilled water as needed to create lump clay, slip or paste in whatever quantity is desired. On the other hand, it can be tricky to mix to exactly the right consistency. The manufacturers provides mixing instructions for preparing their brands of powdered metal clay. Hadar Jacobson also has created a very helpful video for mixing Hadar's Clay powder into lump clay.

Metal Clay Slip or Paste

Metal clay slip or paste is lump clay that has been thinned down to the consistency of a thick, viscous liquid or an even thicker paste. Its most common use is as a sort of "metal glue" to attach metal clay components together. Not all brands and versions of metal clay come in slip or paste form, but you can easily make your own by mashing drops of water (preferably distilled water) VERY GRADUALLY into a piece of lump clay with a palette knife. You can mix the slip directly in a slip jar or container (a very small jar or other container with a tight-fitting lid in which you will store the slip), but I find it much faster and easier to mix my slip on a piece of glass and then scrape it into a slip jar. Here are some the ways in which metal clay slip or paste can be used:

  • It can be painted on leaves in many thin layers to create metal leaves (the organic leaf burns off in the kiln).
  • It can be used as "glue" to join metal clay pieces together before firing, or to attach elements (like metal clay balls) to unfired metal clay.
  • It can be used to fill in very fine cracks in unfired clay.
  • It can be painted on thickly with a brush or palette knife to create stucco-like or other textures (as you might do with cake frosting).
  • It can be used to apply dimensional designs or patterns using the "slip trailing" technique, in which a brush dipped in slip is touched briefly to a dried metal clay component and then lifted up slightly and gently pulled horizontally to create a thin "thread" of slip that is allowed to trail down onto the component in a thin line. The design is created with a series of short, adjacent "slip trails" and then built up in successive layers to create the desired height or dimensionality.

    For more detailed information and instructions for this technique, read the chapter by Terry Kovalcik in the excellent book, PMC Technic.

  • Art Clay makes a special Overlay Silver Paste (OSP) for decorating porcelain, ceramic and glass with silver accents, and a fantastic Oil Paste product for making very secure attachments or repairs to fine silver (including fired silver metal clay).
  • Slip made from PMC can be mixed with 100% pure essential lavender oil or another pure essential oil to create a homemade oil paste that creates very strong attachments between pieces of fine or sterling silver metal (including fired silver clay), between fine or sterling silver clay and fine or sterling silver metal(including fired silver metal clay), and between pieces of silver metal clay.

    Note: See my article on Making PMC Silver Metal Clay Oil Paste for instructions on how to mix up your own homemade silver clay oil paste and for more information about using it.

Syringe Clay

Syringe clay's consistency is midway between that of lump clay and paste clay. It comes in its own non-refillable syringe with separate tips that can be interchanged. It can be used to attach or repair metal clay components, or to embellish them (similarly to embellishing a frosted cake with an icing-filled cake decorating syringe).

The tip of an opened clay syringe must always be submerged in water when not actively in use. During a work session, you can stand the syringe in your water jar with the point submerged, or in a jar with a soaking wet sponge cut to fit inside the bottom of the jar so that the tip of the syringe is pressed into the wet sponge. After you're through working with the syringe for the day, store it in a way that keeps the tip submerged in water. You can use a capped florist's water tube (for keeping cut flower stems fresh in transit during delivery) filled with distilled water and push the tip end of the syringe through the cap so that the entire tip end is submerged in water, or stuff a small piece of sponge inside one of those tubes, saturate it with water, and push the tip of the syringe through the cap all the way down into the wet sponge. With either of these methods, store the syringe (with the tipped kept wet inside the florist's water tube) sealed inside a zippered plastic bag. Or buy Linda's Lid, a glass jar with a special screw-on lid designed specifically for this purpose that can hold up to 4 open syringes upright with their tips submerged in a wet sponge (or just distilled water). Make sure to buy extra corks to seal the unused holes in the lid. Linda's Lid is available directly from inventor Linda Stiles Smith of Naturescapes Studio and from several metal clay suppliers.

Here are some the uses of syringe clay:

  • Use syringe clay to create a lacy "filigree" of metal clay over a combustible core, such as cork clay, wood clay, or even puffed cereal.
  • Use syringe to create latticework or netting designs.
  • Use syringe clay to create an outline of clay for freeform openwork designs.
  • Use syringe clay to create dots and lines.
  • Use syringe tips in different sizes and shapes to extrude different types of strands. You can buy syringe tips in several different shapes and sizes. You also can buy extra tips and modify them yourself to create even more shapes. For example, pinch opposite ends of the opening of a large, round syringe tip so it's more leaf-shaped and then cut a small V-shaped notch in the center to extrude leaf shapes with a center vein.
  • Use syringe clay to attach silver metal clay components together, to join the ends of silver clay ring bands, etc.
  • Use syringe clay to caulk cracks, small holes, or other small imperfections in dried or fired silver clay.
  • Make a coil or nest of syringe clay as a bezel for a stone that can be fired in place.

    Note: See my comprehensive guide to Setting Gemstones in Metal Clay for a wide range of methods for setting stones in metal clay, both before and after firing.

  • Use low-fire syringe clay to loosely but completely encircle a dichroic cabochon before firing. Continue the loop to create a bail, if desired.

Paper Clay / Sheet Clay

PMC and Art Clay make two slightly different versions of this paper-like form of silver metal clay, which remains flexible even when completely dry. You can also roll out PMC Flex clay to one or two cards thick and use it for most of the same applications as metal clay paper.

Art Clay Silver Paper Type is about twice as thick as the PMC+ Sheet, so for certain applications you may want to "laminate" two sheets of PMC Sheet together for applications that require thicker or sturdier clay. Here's how Celie Fago taught me to laminate layers of PMC Sheet:

  • Start by placing one piece of the PMC+ Sheet on a piece of nonstick sheet. Brush or mist the silver sheet very lightly with water, and then stack another piece of silver sheet on top of the moistened layer.
  • Immediately smooth the top sheet against the bottom sheet with the sides of your hands, smoothing from the center of the clay out to the edges to press out any air trapped between the two layers.
  • Cover the top layer with another piece of nonstick sheet and weight it down with a heavy book for at least 20 minutes, which will allow the water and pressure to bond the layers together securely.
  • If you want to laminate three or more layers of PMC+ Sheet, don't add more than one layer at a time; wait until the previous layers have been weighted down under the book for at least 20 minutes before adding the next layer. (Don't forget to cover the top layer with nonstick sheet before weighting it down!)

When attaching commercial silver metal clay paper (not very thin sheets of PMC Flex) to another piece of metal clay (any form), be sure to use water or slip very sparingly so the paper doesn't disintegrate. Apply the water carefully to the back of metal clay paper only, place it on the clay to which you want to attach it, and then apply gentle pressure from the front to make sure it adheres securely to the clay underneath.

Tip: There is a smooth side and a slightly textured side (small dots) to the paper, so pay attention to which side you want up.

Here are some uses for silver clay paper:

  • Create appliqués by cutting out shapes with a sharp scissor or craft knife or using craft punches or paper punches. Attach them to your design by lifting the underside of each appliqué with a barely damp brush, carefully sliding it off the brush exactly where you want it and pressing the dry top of the appliqué firmly.
  • Note: If you get water on the top of the paper, it will turn mushy and be ruined. Also, be very precise when sliding each appliqué off the brush, as you generally can't move it successfully once it touches the clay to which it's being applied.

  • Use the leftover PMC Sheet or Art Clay Paper Type from which you cut or punched out shapes previously to create negative space appliqués. Barely moisten a sheet of plain metal clay paper (or rolled out lump clay), then carefully lay the punched or cut-out PMC Sheet or Art Clay Silver Paper on top of the backing sheet and smooth it evenly it from the center out toward the edges, taking care not to tear or distort the fragile paper "filigree." After firing, use the recessed areas for patina, enamels, or keum-boo accents.

    I like this effect so much that I sometimes cut or punch shapes out of metal clay "paper" specifically to create a negative-space design. Of course, I always save the cutouts to use as appliqués on the same or other projects.

  • Weave strips to create a woven silver fabric effect. Make sure to attach the loose ends of all the strips securely on both sides with a tiny bit of water. Roll out a backing sheet from lump clay to stabilize the woven "silver fabric". See my Silver Metal Clay Weaving Tutorial for step-by-step instructions and diagrams.

    Tip: Use a higher shrinkage silver clay for the backing sheet to create a domed effect.

  • Create a bezel for stones that can't be fired in place with a strip of PMC Sheet or Art Clay Silver Paper. See "Recommended Links," below, for the link to order a reprint of Jennifer Kahn's "Metal Clay Bezel" article in the May 2005 issue of Lapidary Journal (now Jewelry Artist magazine). Better yet, order the book PMC Technic which includes an entire chapter that Jen wrote about her metal clay bezel technique.
  • Create fine silver origami by cutting and folding PMC Sheet or Art Clay Silver Paper.
  • Braid strips to use as decorative accents.

Learn Jennifer Kahn's Method for Making Custom Metal Clay Bezel Settings

Tutorial: How to Make Metal Clay Paper-Thin Sheet from NobleClay Bronze, Silver or Copper Metal Clay or From PMC Flex

Commercial fine silver metal clay paper (Art Clay Silver Paper Type or PMC+ Sheet) is a unique product that doesn't dry out with exposure to air. However, you can make your own paper-thin metal clay sheet with other types of slow-drying metal clay, including BRONZclay and COPPRclay from Metal Adventures.

Here is a video demonstration of how to do this with the soft formulas of NobleClay Bronze, Silver or Copper clay. Be very gentle when removing the plastic wrap to avoid tearing the fragile paper-thin sheet of metal clay, and always peel away the plastic wrap from the clay and not vice versa. Also, use the edge of a sharp craft blade to help you loosen and lift the edge of the sheet.

Tip: You can also make a flexible paper-thin sheet of fine silver clay by rolling out the new PMC Flex lump clay formula in the same way.

Tutorial: How to Make Flexible Metal Clay with Glycerin - with Hadar Jacobson

What's your favorite type of metal clay?

Do you prefer to use the basic lump clay and paste forms of metal clay, or do you enjoy using syringe clay for embellishment (or as a strong alternative to slip)? Have you tried using silver clay sheet or paper type for bezels, embellishments, weaving or origami?

Which form of metal clay do you enjoy using most?

See results without voting

More by this Author


What are your favorite ways to use different forms of metal clay? - Let me know (or just leave a comment to let me know you stopped by!) :) 18 comments

Margaret Schindel profile image

Margaret Schindel 3 years ago from Massachusetts Author

@melody-pierson: Melody, you're such a talented artist that you're sure to do something interesting with anything you turn your hand to, my friend. :)


melody-pierson 3 years ago

I love to use metal clay for jewelry mainly however, lately, I am considering making boxes, vessels and some stand-alone sculptures. I am also very interested in incorporating metal clay into other media.


Margaret Schindel profile image

Margaret Schindel 3 years ago from Massachusetts Author

@ecogranny: Thanks so much, Kathryn! Metal clay is an awesome jewelry making material. If your friend is interested in jewelry making, I'd love if it you could let her know about my new "Bangles, Baubles and Beads" Contributor on Squidoo page so she'll have easy access to all my metal clay jewelry tutorials (and other jewelry making tutorials). She might even like to participate in one of my upcoming Amazon curation list book and product review challenges. :) Thanks again!


ecogranny profile image

ecogranny 3 years ago from San Francisco

I had no idea these products existed. What fun it must be to make jewelry and other items. I think a friend of mine might be very interested in this page. I will let her know. Thank you for sharing it.


Margaret Schindel profile image

Margaret Schindel 3 years ago from Massachusetts Author

@sierradawn lm: Hi Sierradawn! I'm so glad my article on metal clay captured your interest. Kilns are fairly expensive and they aren't carried in craft stores, but if you use fine silver metal clay you can fire small pieces (earrings, small pendants) with an inexpensive handheld butane torch that you can buy in a kitchenware shop (often called a creme brulee torch there) or in a hardware store. I hope you get to try working with this amazing jewelry making material! :)


sierradawn lm profile image

sierradawn lm 3 years ago

I have never heard about metal clay before and am so intrigued! One would need access to a kiln though. I wonder if any of our craft stores around here might have one. I do want to explore this and try my hand at it! Thank you for this nicely detailed tutorial!


Margaret Schindel profile image

Margaret Schindel 3 years ago from Massachusetts Author

@Lady Lorelei: It's a wonderful jewelry making medium! I wish her luck with her holiday sales. :)


Lady Lorelei profile image

Lady Lorelei 3 years ago from Canada

I believe this is the type of jewelry a relative of mine is making. She is currently doing craft fairs on the weekends for pre Christmas sales of course.


Margaret Schindel profile image

Margaret Schindel 4 years ago from Massachusetts Author

@anonymous: My pleasure! Glad I could be of help. :)


anonymous 4 years ago

@Margaret Schindel: Ah that makes sense :) Thanks again for you help, very much appreciated.


Margaret Schindel profile image

Margaret Schindel 4 years ago from Massachusetts Author

@anonymous: Hi Jane, glad I could be of help! In terms of a hollow vs. a solid bead, I think it would depend on the size and thickness. In terms of economy (given the high price of silver clay these days) as well as sintering, a hollow bead (such as a small lentil) might make more sense. The UltraLite is not designed for firing large volumes of clay. Hope this helps!


anonymous 4 years ago

@Margaret Schindel: Thank you for your advice! I really appreciate your time and help :) Would I have to hollow out the form before firing it, or can it be a solid piece put into the kiln?


Margaret Schindel profile image

Margaret Schindel 4 years ago from Massachusetts Author

@anonymous: Hi Jane,

Syringe clay isn't as strong as lump clay, so I wouldn't advise using it in this way. It's always best to use the form of the clay with the most material (i.e., highest proportion of metal to binder and water) for the application in which you are using it, so lump clay is always preferable in situations where it can be used. Also pressing syringe clay into a mold and then unmolding it would not give you very good detail, both because it contains proportionally less metal particles than lump clay and because there would be no way to press it firmly into the details of the mold. For satisfactory results, I would strongly encourage you to use lump clay.

To save on clay, however, you can press the lump clay firmly into the silicone mold, allow it to dry partially so that there is a fairly thick shell of clay all the way around the mold (including on the bottom, which will become the top when the clay is unmolded), but the clay in the center is still somewhat moist. Then CAREFULLY carve out some of the partially moist clay in the center to create a hollow molded component.

I hope this information is helpful!

Best wishes,

Margaret


anonymous 4 years ago

Hello, would a syringe form of metal clay work if you filled a silicon mould with it? I know you wouldn't be able to fire it in the kiln whilst it's in the mould though. Would it dry out enough or set slightly to allow your piece to be popped out of a mould then fired? I have never used any kind of metal clay before and any advice you have would be greatly appreciated! Thanks


Margaret Schindel profile image

Margaret Schindel 4 years ago from Massachusetts Author

@ajgodinho: Thank you so much for your extremely kind comment and for your SquidAngel blessing! Both are greatly appreciated!


ajgodinho profile image

ajgodinho 4 years ago from Ontario, Canada

Thanks for sharing your experience with metal clay. This is new to me so this lens was informative. Looks like a great hobby that can be turned into a business from home!


Margaret Schindel profile image

Margaret Schindel 4 years ago from Massachusetts Author

@hippiechicjewelz: I agree! I also enjoy combining it with syringe, slip and paper-type clay. Thanks so much for your comment! :)


hippiechicjewelz profile image

hippiechicjewelz 4 years ago

I like lump clay, you can do so much with it...beads, pendants, bracelets and so much more! The possibilities are endless!

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working