I'm working on a very long hub (right now it's at 2600 words), and I'd like to put page jumps in, so that someone could click on a title and skip to that part farther down on the same page. I know that in regular html, it looks something like this:
And then the target would be tagged
But it doesn't seem to work. I keep getting a message that hubpages is "cleaning up my html", and then when i test the page jump it doesn't work.
Does anyone know if page jumps are possible on hubpages?
HP has plenty of hoop jumps, but page jumps may be a bit technical for this tech crew so far. They can't even keep the stats running smoothly of late!
Yes - but you can only jump to the beginning of a module - so you'd have to ensure that you design the modules correctly.
Add links in the format 'http://hubpages.com/hub/Hubname#mod_xxxxxxx'
The #mod number is a number that is assigned to every module that you insert in a hub.
Using Internet Explorer - go to your hub:
1) Click on View Source
2) Scroll down the source until you find your introduction text. Look for code like: div class="modfloat full"><div id="mod_20494979" class="module moduleText color0"
OK, thank you, this is helpful.
So in the link format http://hubpages.com/hub/Hubname#mod_xxxx
What do I replace the first "hub" with?
What about the "hubname"?
Where would I find the names that I need to use?
Thanks for your help!
Replace "hubpages.com" with your subdomain. Then replace "Hubname" with the name of your Hub. Leave "/hub/" the way it is. Basically it's http://link.to/your-hub#mod_xxxx.
The "#mod_xxxx" identifies a specific HTML element on a webpage. When you put "#mod_xxxx" at the end of the URL to a specific webpage, that tells the web browser "Go to the page, then go down to the element specified by the ID." So you just put the "#mod_xxxx" identifier at the end of the link to your hub.
If you use Google Chrome (a much better web browser than Internet Explorer), you can right click on a module and select "Inspect Element." But either that or the view source method Simey mentioned will let you find the ID of the module.
Simey - thanks for posting that information! Very helpful to know.
by xpressrite2 years ago
So hubbers help? I had four hubs that went from the pending state to having the featured status. Originally they were all viewed on the page where you can hop hubs.Now I dont no where...
by Thomas Dowling2 weeks ago
I give! I've searched the first 3 or 4 pages of "Getting Help" Forum and I've read the entire Link's Capsule section in the Learning Center (http://hubpages.com/learningcenter/using-hubtool). That Hub, by the...
by meloncauli3 years ago
Since I finished the apprenticeship, and after umpteen updates and changes made on HP, my traffic has never picked up. I can't remember the last time I saw any more than 40 views a day. My average at the moment is more...
by Sid Kemp3 years ago
Hi All:This problem appeared late 3/29 and continues into the early hours of 3/30, same as the "accolades appear as text, not graphics" post I just made. I post it separately because it may be a different...
by Elxar6 months ago
Hey guys! I'm a new Hubber and I just wanted suggestions on how to get more followers and more clicks to my articles.
by William F Torpey9 years ago
I've read lots of instructional stuff about these, but I've pretty much given up on trying to put them on my hubs because I just don't understand aspects of these tools. What I'd like to know is: Can I survive on...
Copyright © 2017 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.