jump to last post 1-2 of 2 discussions (14 posts)

Adding line breaker

  1. sunilkunnoth2012 profile image72
    sunilkunnoth2012posted 3 years ago

    How can I leave some attractive line breaker in between the text of my hubs. I have found some great hubbers doing this wonderful job and its adds beauty to their hubs.  Can anyone share me the secrets?

    1. livingsta profile image95
      livingstaposted 3 years ago in reply to this

      Hi Sunil, open a photo capsule, one that you would use to add photos to a hub. Add the line breaker as a photo to that capsule. That is it. See attachment for sample!
      Hope this helps!

      http://s1.hubimg.com/u/7964636_f248.jpg

      1. livingsta profile image95
        livingstaposted 3 years ago in reply to this

        Forgot to mention, the attachment is picture of a line breaker. Do not add any other details to the photo, like "name of source" or "caption", etc.

        1. sunilkunnoth2012 profile image72
          sunilkunnoth2012posted 3 years ago in reply to this

          Sorry still I didn't get the point. Will you please clarify with some simple illustration.

          1. livingsta profile image95
            livingstaposted 3 years ago in reply to this

            http://s2.hubimg.com/u/7964685_f248.jpg

            See screenshot of one of my hubs in edit mode. Does this help Sunil?

    2. Dale Hyde profile image86
      Dale Hydeposted 3 years ago in reply to this

      What I do is add a photo capsule and move it to where I want the line breaker to be.

      Prior to that,  you will have wanted to save a line breaker to your photos on your machine.

      Once the two steps above are done, simply click "edit" on the photo capsule you have added and "upload" the line breaker from your machine as a regular photo would be done.  Do not add any text to the photo, just click "save" and then presto, you have a line breaker in place on your hub. 

      Do the same for each place you want to have a line breaker appear.

      Once you have done the initial upload of the first line breaker,  you then have it here on HubPages and you can simply load it from "my photos" when you go to edit a new photo capsule you have added.

    3. livingsta profile image95
      livingstaposted 3 years ago in reply to this

      Hi Sunil, I have quickly created a hub. Please follow the link below. I hope this helps.

      http://livingsta.hubpages.com/hub/How-t … s-to-a-hub

  2. JustMike profile image44
    JustMikeposted 3 years ago

    livingsta I think you should write a hub on how to do this and any other tricks that you know.

    1. livingsta profile image95
      livingstaposted 3 years ago in reply to this

      That is a good idea JustMike. I will try and do one! Thank you.

      1. sunilkunnoth2012 profile image72
        sunilkunnoth2012posted 3 years ago in reply to this

        screenshot of one of my hubs in edit mode. Does this help Sunil?  Hi Dear Please paste the link of the above hub as the screenshot is not clearly visible for reading. Else, as suggested by JustMike please write a fresh hub. Hope you will do the needful ASAP.

        1. livingsta profile image95
          livingstaposted 3 years ago in reply to this

          http://livingsta.hubpages.com/hub/Uses- … -Radiation

          this is the link of the hub. Wherever a line appears, you need to add a photo capsule and attach the image which is your line breaker. Lines are just images which have just a line in them. You can also use other designed line breakers of your choice. Either way, it is an image that is attached to the photo capsule.

          When editing your hub, you insert capsules for text, images, videos, poll, etc. Similarly, insert a photo capsule. Download a line breaker available free to use on the internet, or create one of your choice. Attach this to the photo capsule. And you have the line breaker ready. Please let me know if this is helpful

        2. livingsta profile image95
          livingstaposted 3 years ago in reply to this

          Please see link to the hub that I quickly created. I hope this helps!

          http://livingsta.hubpages.com/hub/How-t … s-to-a-hub

          1. sunilkunnoth2012 profile image72
            sunilkunnoth2012posted 3 years ago in reply to this

            Dear livingsta,

            Thanks a lot for your patience and kind help. You have really helped me with clear cut suggestion. Once again thank you for all.

            1. livingsta profile image95
              livingstaposted 3 years ago in reply to this

              You're welcome Sunil. Happy to help. I am glad it was useful. Have a great week ahead!

 
working