Isn't there someway to 'click to enlarge' an image? For instance, if you want to post an image of a chart that nobody can possibly read unless it's bigger, is there a way to do this? I thought about posting an enlarged version elsewhere with a link, but isn't there a way just to keep it on HubPages?
Clicking on an image used to produce this result. However the system was changed over a year ago and now it just launches an album viewer/slideshow. It would be nice to have this feature again.
The slideshow should present a larger version of the image, so long as one's window is at full width. The slideshow won't run if there is only one image in the Hub, but we strongly recommend including at least three images in each Hub anyway!
Can you convert the chart to the table capsule? Or perhaps save it as a google document and put the link to the google document in your description of the picture?
I could put the enlarged image somewhere else and link to it, but that's a real waste of a link. I found this Hub (not mine) that is doing what I want to do. I just can't figure out how/where to set this up in the photo module:
http://renilim.hubpages.com/hub/Littles … r-Children
But, the Hub I'm looking at doesn't use the slideshow. It says: "Click thumbnail to view full-size". And the image is bigger than the one in a slideshow. How do you do the one in the Hub example?
From what I can see, an image "scales to fit" in the slide show. The slideshow frame seems to be a constant size. So if an image is smaller, it expands and if it is bigger than the slideshow frame, it shrinks.
To make your images as big as possible, select "full width" within a photo capsule. You can add several images within the capsule by uploading from your computer or clicking on "my photos" to select previously uploaded images. You can also choose "thumbnail" as the display style and this will display a small image for each of the files within that capsule just as in the link you describe.
by ptosis4 years ago
Sometimes people don't want to see the whole slide show.
by Thomas Dowling9 months ago
I give! I've searched the first 3 or 4 pages of "Getting Help" Forum and I've read the entire Link's Capsule section in the Learning Center (http://hubpages.com/learningcenter/using-hubtool). That Hub, by the...
by DzyMsLizzy3 years ago
I don't see where else to place this issue--I don't think it's exactly a "bug," but more of a change that was made???At any rate, the problem is, it used to be that when you clicked on any photo in any hub, it...
by Becki Rizzuti2 years ago
I thought I should be able to click to make my images a slideshow or to produce a "click to enlarge" but I don't appear to have that option, so while the images appear to be "click to enlarge" on the...
by Ben Guinter4 years ago
I just checked one of my hubs where I give people the option to click and view the FULL size picture and now it looks like we have this slideshow that gives you about a half size view of the picture, if that. I...
by Wendy Hughes23 months ago
I know traffic is a problem everywhere it seems; I'm not talking about low traffic, here. We all need to be aware of the HP's photo capsule may be affecting our bounce rates. There is a real problem if you use the photo...
Copyright © 2016 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.