jump to last post 1-6 of 6 discussions (7 posts)

Link to page URL does not work

  1. runsrealfast profile image80
    runsrealfastposted 8 years ago

    I have tried to use the link to page and of course use the URL tracker I have noticed that for some reason its not working with any of my url trackers. I get the following error.

    Content Encoding Error (content_encoding_error)

    Server response could not be decoded using encoding type returned by server. 
    This is typically caused by a Web Site presenting a content encoding header of one type, and then encoding the data differently. 

    For assistance, contact your network support team. 

    I have one URL tracker that does seem to be working and the link can be found here

    I don't get this why is one working just fine and the others are not?

  2. LdsNana-AskMormon profile image91
    LdsNana-AskMormonposted 8 years ago

    I tried to link to Laura in L.A. earlier and hers is broken as well.  I can't digg her Hub, I can't link to it from mine either manually or through the search from within the link capsule.

    I looked very carefully.. in appearance it looks completely normal.   But the same error that you are referring to pops up when it is inserted in anything.

    trying putting the error in the google search box and see if it will give you info as to what is up?  I will do it too with LILA's Hub...

    Now, I think I better go check my links to make sure all are working from around the Internet?

    Thanks for the thread... I thought it was just that one hub..

    perhaps it is just coincidence?

  3. runsrealfast profile image80
    runsrealfastposted 8 years ago

    NO its all the hubs I am trying to link to. I have put the URL in the address bar on my browser and it does not work. I do have the one that seems to work just fine. I can't figure it out.

    http://hubpages.com/_ASPSPIDER/hub/Addi … PX-webpage

    Seems to work just fine but

    http://hubpages.com/_ASPSPIDER/hub/Arti … Day-Saints



  4. darkside profile image84
    darksideposted 8 years ago

    Sometimes if they have to parse a link at a site that accepts link submissions, it will pick up that the tracker URL is different than the resolved address. So it will reject it.

    But checking out that page http://www.aspspider.com/resources/Resource635.aspx and when I click on the link it does take me to the right page with no errors.

  5. runsrealfast profile image80
    runsrealfastposted 8 years ago

    well the problem also exists on my personal website (which is in developemnt on my laptop). I am not able to post links with the url tracker on my site and then get to the hub. I do have another place to test this out on with one of my hubs I have not yet promoted.

    As to why it works just fine at the aspspider site I have no idea.

    i'll keep working on it.

    1. SparklingJewel profile image68
      SparklingJewelposted 8 years ago in reply to this

      My pictures have not been up since last night. When I am signed in looking through hubs or working on my hubs

  6. SparklingJewel profile image68
    SparklingJewelposted 8 years ago

    I am having picture issues. when I am signed in no pictures show up anywhere I go on hubpages. Also, I have not been able to put pictures into hubs I am building.
    Is anybody there? Where else do I go to relay my problem?
    thanks to everyone who may be working on this