Is it just me? When you choose preview, you can see how the post will look. But, when you submit, it comes back with a note saying you cannot post since there was no information entered (or to that effect). You lose the info that you key in... Can this be corrected? Thanks.
And, when you choose "go back", everything that you've entered is lost!!!!
don't click on go back, just use your < arrow. and it will go back to your original post without a problem.
I have had it happen to me too. Never used to though. wonder whats up with that?
WTF? never tried this feature yet - not going to now, how frustrating Beth and to others.
damn glitches should be buried in ditches? :
There may be some kind of glitch tonight. I have been working on a hub for a few hours now.
Each time I would hit "Done Editing" it would lock-up. After waiting 15 minutes one time, I lost 1/2 of the work I had added to the hub. I went back 2 more times and the last time it locked-up...I opened another tab in browser and went to the hub and after I saw my work done, I went back and closed the tab with the page that was "loading." Weird, but finally got an hours work done in 3 1/2 hours due to glitches.
UGH! Tis frustrating!!! That's terrible Michael!!! You must be sooo frustrated, because I know I would be.
This glitch has been happening since they changed the view from chrono to threaded as the standard. I thought this would have been corrected by now, but how would they know if no one said anything?? lol Guess I'm the bearer of glitchy ditchy news!
It was very frustrating. But, it helps to develop patience I guess. lol Didn't feel patient at the time though. At least I got the work finished that I wanted done tonight.
Do you write in a text editor, such as Word? It's much safer in the sense that you won't lose your work when creating a new hub. Also, it allows you to check for spelling quickly, add links and so on. The bonus: you have a copy on your hard drive.
Patience. We all can use more of it!
I always use Word. That is how I was able to re-paste what I needed when I went back. The problem was the "loading" never ending glitch. lol Would finally have to close page and re-open and start over again.
I had that problem before too. Especially with photos. I can't remember who advised me, but told me that the size of the clip you paste or upload affects the loading. The smaller the byte size, the greater the chance of successful loading without it gliching. I've been following this since, and haven't encountered this glich again.
firefox is a great browser, I haven't had hardly any problems with it at all. I think some of the problems people have here may be browser related more often than not.
if you ever want to make the switch, just google mozilla firefox.
they're very good about updating also and have lots of ways to customize. it's fast and that probably accounts for less glitches with loading pages, etc.
by Aficionada5 years ago
A lot of Hubbers have mentioned the glitch with the Hub keyword tab (no keywords showing up currently).A lot of Hubbers have mentioned the glitch with individual Hub stats (showing only traffic from Google.com and...
by Loraine Brummer21 months ago
Like everyone else, it seems, my hub visits are showing 0 for the last 24 hrs. While I trust that this glitch will be fixed, I’m wondering how everyone else is reacting to these glitches. Do you keep...
by Michelle Liew2 years ago
Some of the photo and video capsules in the hub cannot load. Photos (from creative commons so are accredited and legal) cannot be loaded. Tables cannot be loaded without me refreshing the hub in edit mode too. What...
by TIMETRAVELER25 months ago
For some reason the Google Analytics link on the Earnings page is not working. Hopefully this is a fixable glitch.
by Ray Choiniere aka Cagsil4 years ago
Hey HubPages Staff,It seems as though when Hubs are loading...each are not loading Facebook likes at the top of the page. I don't know if this is a glitch or not, of if it's been removed for a reason?So far, I've not...
by earnestshub5 years ago
For some reason I can reply to comments, I just can't approve them.A glitch in my browser or a problem with hubpages I wonder?Anyone else?I'm running windows 7 and Flock ( a firefox engine)
Copyright © 2016 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.