jump to last post 1-7 of 7 discussions (37 posts)

Regarding GoogleAdSense account

  1. shampa sadhya profile image85
    shampa sadhyaposted 5 years ago

    I have pasted the code in my earnings box and it is showing that the AdSense account is active then why I don't have any ads on my hub. I am confused. Is something remaining which I have to fix then kindly help me out. I completely depend upon you.

    1. sofs profile image86
      sofsposted 5 years ago in reply to this

      Shampa  It is true that you have absolutely no ads on your hubs, you should write to Team@hubpages.com and tell them about this. Whether you are approved or not, ads are there on all hubs .. I am rather stunned.

      1. shampa sadhya profile image85
        shampa sadhyaposted 5 years ago in reply to this

        Thanks Sofs! According to your suggestion I contacted the Hubpages team and they suggested that in my hub, the ad level setting is set at "none" as I was not aware of all such factors. I'am really thankful to you, as now, I 've fixed it and ads are now displaying on my hubs. Still, I've questions:

        I've set the ad level at high, is it right to do so or should I set it on any other level?

        Should I apply for the hubpages ad programme now or I should wait for some more time?

        Will hubpages ad be really beneficial?

        Thanks in advance.

        1. sofs profile image86
          sofsposted 5 years ago in reply to this

          Yeah, set ad level at  high,  go ahead and make Hubpages ad program active, you have nothing to lose and much  to gain.  There is no need to wait any further , though earning may take time to show up smile
          Glad to help and you are welcome to ask for it anytime.smile

          1. shampa sadhya profile image85
            shampa sadhyaposted 5 years ago in reply to this

            Sofs, Thanks again for clearing all my doubts.

          2. 0
            Charlinexposted 5 years ago in reply to this

            Could you please tell me where I can adjust the ad level setting? Sorry for being so ignorant, but my Adsense earnings seem to have stopped recently..

            1. 0
              Website Examinerposted 5 years ago in reply to this

              Ad levels are set to high by default, and can be reduced one hub at a time. In editing mode, there are some tabs on the right-hand side. Choose "settings," and you can adjust the ad level, provided you must first uncheck the box to show that the hub is not considered commercial. In practice, this means you should have no commercial outbound links from that hub.

              1. 0
                Charlinexposted 5 years ago in reply to this

                Thanks for the answer. My next question is about Hub Ads (or whatever it is called). I have disabled all Hub Ads for fearing that it will affect my Adsense Ads. I think it is better to focus on one, but not two. Am I correct?

                1. 0
                  Website Examinerposted 5 years ago in reply to this

                  Charlinex, you are welcome. There have been some extensive, inclusive threads about this. Many have reported that AdSense goes down, but some say that HP ads more than make up for it; others have disabled them again. Experiences differ so much among hubbers that maybe the only conclusion is that each person should feel free to experiment, compare.

                  1. 0
                    Charlinexposted 5 years ago in reply to this

                    WE, thanks again. This is what I think. I will wait until I get a payout from Adsense, then  experiment Hub Ads. Otherwise, Adsense may not reach its payout for a long time.

        2. wilderness profile image96
          wildernessposted 5 years ago in reply to this

          Most hubs are set to "high" - that is the normal position.

          You can either turn on the HPad program or not - you might want to wait a while to see what Adsense does first as the two are interrelated.  Or just go for it and turn it on - most hubbers seem to find it advantageous to have it.

          1. shampa sadhya profile image85
            shampa sadhyaposted 5 years ago in reply to this

            Thanks wilderness,for showing concern and offering right suggestion.

            1. wilderness profile image96
              wildernessposted 5 years ago in reply to this

              You are certainly welcome.

          2. Richieb799 profile image64
            Richieb799posted 5 years ago in reply to this

            I always thought they were automatically set to high as well lol

  2. mdlawyer profile image60
    mdlawyerposted 5 years ago

    Yes. Whether account approved or not ads appear on the hubs. Must be some glitch. As sofs said you may contact Hubpages team.

  3. Pamela Sarzana profile image60
    Pamela Sarzanaposted 5 years ago

    I am new here..there is so much to learn, I tried on hub before but I didn't really understand how the capsules. I opened a Google Adsense acct. months back and never really did anything with it because my problems publishing here had me stymied .Sooo I'm hoping I haven't hurt my self by doing tha.t

    1. sofs profile image86
      sofsposted 5 years ago in reply to this

      Welcome to Hubpages .. your adsense account is never hurt by inactivity . It is easy to write a hub.. write about something that you truly enjoy.
      The capsules are easy to handle too..
      http://learningcenter.hubpages.com/cate … g-started/  read this up and try again.. if you have problems ask here, and you would certainly find help coming your way .

  4. sofs profile image86
    sofsposted 5 years ago

    Pamela I see that you already have written a hub.
    The learning center link already provided and the FAQ section links are well worth reading http://hubpages.com/faq/ for better quality hubs.

    1. Pamela Sarzana profile image60
      Pamela Sarzanaposted 5 years ago in reply to this

      Ok,Thank-you.

      1. Pamela Sarzana profile image60
        Pamela Sarzanaposted 5 years ago in reply to this

        Do I need to publish, or have allot of content before I turn Ad's on?

        1. sofs profile image86
          sofsposted 5 years ago in reply to this

          The ads are on automatically,  if you do not associate your adsense id with hubpages account ,  hubpages gets 100% earning, if not you get sixty percent of adsense revenue  from your hubs.  Since you have an adsense account already  link it to you HubPages account. You can also benefit from the Hubpages ad program if you opt in. 
          http://hubpages.com/faq/#royalties

          1. Pamela Sarzana profile image60
            Pamela Sarzanaposted 5 years ago in reply to this

            I applied for it but had not activated it, It had been so long and I couldn't find my old e-mail. I resubmitted so I guess It will be about a week before I hear from them. I went ahead this past HOUR..lol and now have an Amazon Acct...sheesh. Do  they just pop up where ever? Or do I have to manually put them in these "capsules"?

            1. Pamela Sarzana profile image60
              Pamela Sarzanaposted 5 years ago in reply to this

              Thanks sofs, I have the amazon account activated

              1. sofs profile image86
                sofsposted 5 years ago in reply to this

                You have to choose appropriate Amazons product and put them on your hub. Use the Amazon capsules, use a keyword to select the product or manually select and put the product in.  Glad that you have got things working in the right direction.  smile

  5. Pamela Sarzana profile image60
    Pamela Sarzanaposted 5 years ago

    I picked out 4 and couldn't get them in the capsules

    1. sofs profile image86
      sofsposted 5 years ago in reply to this

      Just paste the link or click on the product get the product id and paste it. Make sure that you have specific products chosen and not keywords when you are trying to put in specifically chosen products. smile I hope this helps smile

  6. Pamela Sarzana profile image60
    Pamela Sarzanaposted 5 years ago

    It says all my accounts are active....so do I still need to paste a code? my codes ore already on the affiliate settings.. I see them.

    1. 0
      Website Examinerposted 5 years ago in reply to this

      There is no code for you to paste into hubs, it doesn't work that way.

      1. 0
        Website Examinerposted 5 years ago in reply to this

        What did I say?

  7. Pamela Sarzana profile image60
    Pamela Sarzanaposted 5 years ago

    I see an add in the bottom of my page that says google so it must be ok

    1. Pamela Sarzana profile image60
      Pamela Sarzanaposted 5 years ago in reply to this

      I never saw where to modify any thing on the affiliate settings

      1. Pamela Sarzana profile image60
        Pamela Sarzanaposted 5 years ago in reply to this

        I still can't figure out where to post a code from Adsense...but it looks like they are on my page I'm not sure what else to do

        1. 0
          Website Examinerposted 5 years ago in reply to this

          You need to read and follow the instructions in the Learning Center, a link to which is provided at the buttom of this page. Also, you can click on "Help" and search for AdSense.

    2. 0
      Website Examinerposted 5 years ago in reply to this

      There are always ads on hubs, whether people have an active AdSense account or not. If the AdSense account information under affiliate settings shows "active," then you have an active AdSense account, and your affiliate ID will appear on 60% of the page impressions.

      1. Pamela Sarzana profile image60
        Pamela Sarzanaposted 5 years ago in reply to this

        I didn't have to paste any code

        1. 0
          Website Examinerposted 5 years ago in reply to this

          Correct. But your AdSense affiliate ID has to be recorded in Affiliate Settings under My Account, and the status must show "active." The rest happens automatically.

          1. Pamela Sarzana profile image60
            Pamela Sarzanaposted 5 years ago in reply to this

            my number is right next to where it says "active" , the same on the Hub acct...so do I STILL need to paste a code?

 
working