Double Duct system - Air Conditioning System

In this system, two separate ducts are run from the central unit to each of the air terminals, as shown in figure below. In winter two warm air streams, of different temperatures, are carried to the air terminals, for individual mixing. The temperatures of both air streams are automatically controlled. In summer the air temperature leaving the cooler is controlled by a multi step thermostat in the re-circulating air stream, which governs the automatic capacity control of refrigerating plant, as with the zone control. Steam is supplied to one of the heaters, so that two air streams are available at the air terminals for individual mixing. 

  1. Filter
  2. Cooler
  3. Low duty heater
  4. High duty heater
  5. Pre-insulated pipes delivering air
  6. Sound attenuating air terminal, with volume and temperature control
  7. Automatic steam valve for tempered air stream
  8. Automatic steam valve for warm air stream
  9. Steam traps
  10. Multi step cooling thermostat
  11. Compressor
  12. Automatic Capacity Control valves
  13. Condenser
  14. Thermostatic expansion valve
  15. Sea water pump
  16. Fan starter
  17. Compressor starter
  18. Sea water pump starter

References


"Marine Auxiliary Machinery" by H.D. McGeorge



Read More


www.marineengineeringonline.com




More by this Author


Comments 1 comment

Haseena Firdousia profile image

Haseena Firdousia 3 years ago from India

Thanks for sharing. Great.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working