How to Work Out The Sides and Angles of Triangles
The Triangle - A 3 Sided Polygon
Polygons are plane (flat) shapes with several straight sides. Examples are squares, triangles, hexagons and pentagons. The name originates form the Greek "polús" meaning "many" and "gōnía" meaning "corner" or "angle". So polygon means "many corners".
A triangle is the simplest polygon, having 3 sides.
Triangles Have Angles
Triangles have 3 corners and the angle between the sides can be anything from greater than 0 up to 180 degrees. The angles can't be 0 or 180 degrees because then the triangles would become straight lines.
Degrees can be written using the symbol º so 45º means 45 degrees.
All the Angles Add Up To 180 degrees
For every triangle in the known Universe, all the angles add up to 180 degrees.
Similar triangles have exactly the same angles but different length sides.
The sides are in the same ratio.
The Greek Alphabet
In science, mathematics and engineering many of the 24 characters of the Greek alphabet are "borrowed" for use in diagrams and for describing certain quantities. For example the characters θ (theta) and φ (phi) are often used for representing angles. You may have seen the character μ (mu) to represent micro as in micrograms μg or micrometers μm. The capital letter Ω (omega) is the symbol for ohms in electrical engineering. And of course π (pi) is the ratio of the circumference to the diameter of a circle
Trigonometry - Working Out the Lengths of Sides or Angles
Trigonometry is a branch of mathematics which deals with the relationship between the lengths of the sides of a triangle and its angles. If we don't know all the lengths of the sides of a triangle and/or don't know all the angles, there are several equations which can be used to work them out.
We can use the Sine Rule, the Cosine rule, or Pythagoras's Theorem.
Pythagoras's Theorem states that for a right angled triangle
"The square on the hypotenuse equals the sum of the squares on the other two sides"
So if you know the lengths of 2 sides, all you have to do is square the two lengths, add the results and then take the square root of the sum to get the length of the hypotenuse.
Sine and Cosine
A right angled triangle has one angle measuring 90 degrees. The side opposite this angle is known as the hypotenuse and it is the longest side. Sine and cosine are trigonometric functions of an angle and are the ratios of the lengths of the other two sides to the hypotenuse of a right angled triangle.
In the diagram below, one of the angles is represented by the Greek letter θ.
The side a is known as the "opposite" side and side b is the "adjacent" side to the angle θ.
sine θ = opposite side / hypotenuse
cosine θ = adjacent side / hypotenuse
Sine and cosine apply to an angle, not necessarily an angle in a triangle, so it's possible to just have two lines meeting at a point and to evaluate sine or cos for that angle. However sine and cos are derived from the sides of an imaginary right angled triangle superimposed on the lines. In the second diagram below, you can visualise a right angled triangle superimposed on the purple triangle, from which the opposite and adjacent sides and hypotenuse can be determined.
Over the range 0 to 90 degrees, sine ranges from 0 to 1 and cos ranges from 1 to 0
Remember sine and cosine only depend on the angle, not the size of the triangle. So if the length a changes in the diagram below when the triangle changes in size, the hypotenuse c also changes in size, but the ratio of a to c remains constant.
Sine and cosine are sometimes abbreviated to sin and cos
The Sine Rule
The ratio of the length of a side of a triangle to the sine of the angle opposite it is constant for all 3 sides and angles.
So in the diagram below
a / sine A = b / sine B = c / sine C
Now you can check the sine of an angle using a scientific calculator or look it up online. In the old days before scientific calculators, we had to look up the value of the sine or cos of an angle in a book of tables.
The opposite or reverse function of sine is arcsine, sometimes written as sin-1. When you check the arcsine of a value, you're working out the angle which produced that value when the sine function was operated on it.
So sin (30º) = 0.5 and sin-1(0.5) = 30º
The Sine Rule can be used:
If the length of one side is known and the magnitude of the angle opposite it, then if any of the other remaining angles or sides are known, all the angles and sides can be worked out.
The Cosine Rule
The Cosine Rule can be used if:
(a) You know the lengths of two sides of a triangle and the included angle (the angle between the sides). You can then work out the length of the remaining side using the Cosine Rule.
(b) You know all the lengths of the sides but none of the angles
For a triangle with sides a, b and c, then if b and c are known and C is the included angle:
c2 = a2 + b2 - 2abCos C
Area of a Triangle
The area of a triangle can be determined by multiplying half the length of its base by the perpendicular height. Perpendicular means at right angles. But which side is the base? Well you can use any of the three sides. On a drawing you can work out the area by drawing a perpendicular line from one side to the opposite corner using a set square, T square or protractor. (or a carpenter's square if you're constructing something). Then measure the length of the line and use the formula 1/2ah to get the area.
Alternative Method of Working Out Area
The simple method above requires that you actually measure the height of a triangle. If you know the length of 2 of the sides and the included angle, you can work out the area analytically.
Triangles Are Strong!
A triangle is the most basic polygon and can't be pushed out of shape easily unlike a square. If you look closely enough, triangles are used everywhere in machines and structures because the shape is so strong.
Using a Triangle Calculator
There are lots of online triangle calculators on the web which make things easy (or take the fun out of doing the calculations!). These calculators allow you to enter angles and side lengths and they will work out all the remaining sides and angles. Here's one here:
Did You Find This Article Useful?
Was the info in this article useful and instructive? How can I improve it? Would you like to ask me any questions?
Please provide some feedback below, and also I would appreciate it if you could re-pin it on Facebook or Pinterest.
© 2016 Eugene Brennan
More by this Author
Mechanics is a branch of physics which deals with forces, mass and motion with applications in engineering construction, the design of machines, ballistics and space travel
Working out the odds of an event occurring allows us to estimate the number of times that event will take place in future trials. Permutations/ combinations are also an important part of the analysis
A multimeter or DMM is a useful instrument in a home toolkit for measuring voltage, current and resistance and also for tracing breaks in wires, testing components and fuses.