jump to last post 1-4 of 4 discussions (7 posts)

192.168.1.1 - How To Connect To The Router Admin Interface ?

  1. alternativeto profile image61
    alternativetoposted 2 years ago

    http://s2.hubimg.com/u/9043447_f520.jpg
    I got a  Linksys broadband router from my brother and was trying to set up the router and change the router password so that no one else could access the router, my brother told me to go to 192.168.1.1 and access the admin console to change the password and i tried it but i wasn't able to connect to 192.168.1.1 . I tried with chrome , Firefox and Internet explorer all of them showing same results.

    Can anyone tell me how to fix the connection problem and connect to admin interface at 192.168.1. ?

    1. wilderness profile image95
      wildernessposted 2 years ago in reply to this

      Mine connects via 192.168.0.1 but I have no idea if all router/modems are the same.

    2. Matthew Meyer profile image78
      Matthew Meyerposted 2 years ago in reply to this

      open a command prompt

      Window and R key

      Enter the following at the command prompt and press ENTER

      ipconfig /all

      Info about ipconfig
      http://technet.microsoft.com/en-us/libr … 90921.aspx

      You should see the IP for your computer and the gateway IP as well.
      The gateway is likely your router IP.

  2. brakel2 profile image88
    brakel2posted 2 years ago via iphone

    If you have an. I
    Phone

  3. brakel2 profile image88
    brakel2posted 2 years ago via iphone

    If you have an IPhone, you can find router number in wi fi settings. Then put router number in address bar of computer. Then press enter and router info will come up.

  4. brakel2 profile image88
    brakel2posted 2 years ago via iphone

    My router number is 198.168.2.1. You might try that number. Good luck.

    1. alternativeto profile image61
      alternativetoposted 2 years ago in reply to this

      i will try it out , thank you all

 
working