Splinter Removal | Tips And Tricks
Enter The Splinter... Ouch!
There is nothing more effective at halting play or work like a well placed splinter. You've been there, after the initial sting comes the hunt to retrieve the foreign invader. Many of the initial attempts just embed the splinter deeper into the skin. You are not supposed to squeeze the skin around the entry point, that pushes the splinter deeper. If you are lucky enough to get it out on the first few attempts with tweezers then great, however sometimes you may have a difficult time to get the splinter because of the location, such as on the bottom of the foot.
Foot splinters are the worst because you need to walk, every step you take drives the splinter deeper and deeper. Eventually you stop feeling the pain yet the skin tissue is still being damaged. The body's natural response is to surround the foreign object with liquid, in an attempt to shield it from the body's blood stream. If the object is not pushed out by the body's natural fluid response, infection may occur.
Now that you are the proud owner of a fine splinter, you must determine what you're up against.
Wood or metal? Soft or hard? One piece or broken?
Different types of splinters call for different approaches. We will look at the most common splinters and the most common approaches used for their removal.
The tweezers didn't work. The skin is starting to swell, the body's natural reaction. The swelling is often helpful in the sense that it will "squeeze" the splinter closer to the surface. One thing to remember about wood is that wood is porous. Wood will hold water and will expand in size while doing so. You can help with the "squeezing out" process by soaking the splintered area with water. Once the splinter is near the surface, you can attempt the tweezers again.
This technique will also work well for a partially removed splinter, a splinter that has been broken in half during previous removal attempts.
Metal splinters will not behave the same way as wood splinters. With metal splinters you are relying solely on your skin to push out the foreign object. The metal will not expand in fluid like the wood.
I write this with a metal splinter in my foot.
After much Google searching, I have learned about drawing salves. Drawing salves work by removing moisture(this includes infected puss) from the area around the splinter, in turn the splinter follows the exiting fluid and the problem is solved.
I have read about Ichtammol Ointment, also known as "Black Salve". Treatment involves placing the salve on the skin where the splinter is located. A bandage is then placed over the affected area. Shortly after the splinter will be found in the bandage.
I failed to find this at ant of the pharmacies in my area. I decided to try something else.
Next on the Google list was Magnesium Suplhate. A paste made with Epsom Salts. It is to be applied to the skin and draws out moisture and toxins to the surface of the skin much like the Ichtammol. I was also unsuccessful at finding this at my local pharmacy, so i decided to make it myself simply by crushing the epsom salts with some water to make a poultice. Read below for more details of this poultice along with my own technique for deep splinters in hard to reach locations.
Fiberglass Splinters, Tiny But Deadly!
Working with fiberglass insulation or industrial type fiberglass air filters can leave you with some rather annoying, tiny fiberglass splinters in your hands or on your skin. Prevention is king, wear gloves and protective clothing if you work with this material, however this stuff is sneaky and has ways of getting by your protective clothing.
If dermal contact occurs with a fiberglass splinter, or splinters, as there's never just one with fiberglass, the best removal method is packaging tape! Luckily fiberglass usually sticks close to the surface of the skin as it doesn't have the weight to penetrate to deeply, yet it is to hard to see because of it's size rendering tweezers useless. Packaging tape will pull those tiny fibers right out!
Always be extra careful with this stuff around your eyes! Wear goggles and DO NOT SCRATCH YOUR EYES IF THEY GET ITCHY! In the event you get some in your eyes, try an eye wash, or just rinse out with water.
This material can also become airborne and enter your body through your mouth or nose while breathing. Wear a dust mask or better yet a cartridge respirator used for painting to prevent having this stuff in your throat or lungs!
Do not mess with this stuff. If you must be in contact with it wear all the protective gear and keep others away!
Work safe, stay alive!
What Works For You?
What do you usually do to remove your spinters?See results without voting
Here's What Worked For My Stubborn Heel Splinter:
Stuff I Used
- Callus Cushions
- Epsom Salts
- Scotch Tape
- Good Tweezers
- Mortar and Pestle, (Herb Crushing Bowl)
- Lots of Patience
I had a really stubborn metal splinter in my heel. It was a horrible spot because it would affect the way i walked. I couldn't land on that part of my heel so eventually the front part of my foot began to be sore with every step.
The splinter had gotten so deep because of the inevitable pressure constantly applied to the area by walking. Tweezers were out of the question. I tried soaking, it helped but not enough to get out the splinter.
I had read about making a poultice out of epsom-salts and applying it to the area with a bandage, however this wouldn't work for me because of the ever present pressure by walking.
I refuse to be bedridden because of a splinter.
I went to the pharmacy and browsed through the isles. What I came up with was pure genius! I purchased a pack of callus cushions and centered the entry point of the splinter with the hole of the cushion.
Then with my mortar and pestle (herb crushing bowl thingie) I prepared a poultice out of epsom salts and water.... 1 part epsom salts, 1 part water. I scooped up the poultice and stuffed the center of the callus cushion with the epsom salt poultice. Using a piece or two of scotch tape, i sealed up the hole, trapping the poultice in the void created by the callus cushion.
The callus cushion also relieves the pressure on the splinter, which greatly facilitates walking. All the while the poultice is held in place effectively giving it a chance to do it's magic.
I followed the above procedure and within three days the splinter revealed it's ugly head (which i quickly and easily tweezered away). The pain, and the swelling have also disapeared. I did have to re-apply the bandage and poultice every morning and night, but it was well worth it!
Did You Try It? Did It Work? Rate it Below!
"Hey Ardot, None Of My Splinter Removal Attempts Are Working And Now I Think It's Getting Infected Because It's All Red And Painful!"
Egads! Man! Go see a doctor!!! Infection is no joke, you can lose a limb! Your doctor will know exactly what to do. A simple procedure that will probably take less than five minutes will solve your deep splinter woes. Of course do try to get it out yourself.... It can be pretty expensive for such a seemingly trivial thing. Usually the splinter works it's way out anyway. If you really would rather not go to a doctor, the epsom salts or drawing salves will help keep infection away. Again, proceed at your own risk, runaway infection can have very dire consequences.
© 2015 Ardot
More by this Author
- 0Rid Yourself Of Blood Pressure Medication Naturally - It Is Possible By Practicing A Healthier Lifestyle
Diagnosed with high pre-hypertension at an early age, I was prescribed blood pressure meds by my doctor and told i'd be on them for life. Read how I proved my doctor wrong and got myself off of my medication for good...
Read of my experiences with the common male condition known as vericocele. This hub is meant to educate any other males who may have a similar condition.
Don't panic! Finding the source of the problem yourself could save you hundreds of dollars!