Unique Beaded Ornament; Christmas Ball Pattern

Unique, beautiful, simple handmade Christmas ornaments.
Unique, beautiful, simple handmade Christmas ornaments. | Source

The basic round Christmas ornament is the most commonly shaped ornaments you can find. But that doesn’t mean that they are in any way boring, especially if you have unique homemade Christmas ball ornaments hanging on your tree.

Here is a bead craft pattern for homemade ball ornaments that will glow as the lights from the Christmas tree shine through the beads. This Christmas ball pattern is inexpensive and simple to create, making it a fun family or group activity. These homemade Christmas Ornaments make nice gifts to give or to keep for your own collection.


First, select the colors you would like to use for your Christmas ball pattern. You will need to select a primary color, a secondary color and then some clear beads for this ornament ball. For the one I’m making here, I have selected to have green as my primary color and yellow as my secondary color.


To complete one Christmas ball pattern, gather the following materials:

3 Pipe cleaner craft stems

26 - 8mm Faceted Beads of one color that will be the main color of the ornament (mine are green)

6 - 8mm Faceted Beads of another color that will be the middle accent color (mine are yellow)

15 – clear/crystal 18mm Starflake Beads (clear)

13 - clear/crystal 6mm Faceted Beads (clear)

2 - 12” strands and one 7” strand of thread or clear nylon thread

Ruler

Wire Cutters

Scissors

Multi-purpose glue

Use the images provided as a guide to help with each step in creating this round Christmas ornament.


Instructions

1. To begin this bead craft pattern take the 3 craft stems and lay them side by side with the ends even with each other. Tie the three craft stems together in the center with one of the 12” strands of thread.


2. Spread the craft stems to look like a six pointed start and wrap the thread between each of the spaces; securing the stems with tight knots in order to keep this star formation.

Clip off the remaining thread ends.


3. Feed beads onto each of the six stems of this Christmas ball pattern in this sequence:

1 - 6mm clear faceted bead

2 - of the main colored 8mm faceted beads (mine will be green)

1 - clear starflake bead

1 - of the opposite colored 8mm faceted beads (mine will be the yellow)

1 - clear starflake bead

2 - of the main colored 8mm faceted beads (mine will be green)

1 - 6mm clear faceted bead

4. Once all six stems have been beaded, take the six stems and fold them downward to meet together.

With the other 12” strand of thread tie the six stems together securely at the ends of the beads.

Wrap the thread around the stems again and tightly tie again.

Pull the ends of the stems in the opposite direction from the ornament in order tighten the formation of the beaded ornament.

Clip off the remaining thread/wire ends.


5. Of the six stems, take five of them and bend them outward, leaving one remaining stem in the center. Squeeze and shape the ornament until it takes more of a round Christmas ornament form.

Using wire cutters or scissors cut the five stems closely to the knots, leaving the center stem in place. Keep these cut stems near by as you will use one later.


6. On the one remaining stem, feed on two clear starflake beads.

Add a bit of glue on the stem just above the starflakes then feed on one of the main colored 8mm faceted beads (mine being green).

Be sure that last bead is glued securely in place then clip off the remaining excess stem.










7. Take one of the previously clipped stems and bend a hook shape about ½” from the end.

Feed the hook through the opposite end of the Christmas ball pattern so that it hooks through the stems on the rounded end.

Once the hook is in place, twist the shorter end of the hook tightly around the longer end of the stem to secure it in place.

8. Feed on one clear starflake bead and one of your main colored 8mm faceted bead (mine being green).

Tie a 7” strand of thread to form a loop and lay it onto the stem close to the last applied bead. Place a bit of glue onto the stem just above the last bead and onto the thread.

Feed one 6mm clear faceted bead through the thread and then onto the stem. The thread should now come out on the top of the ornament.

Be sure the end bead is glued securely in place. Now we complete our simple handmade Christmas ornaments by clipping off the remaining excess stem.




More by this Author


Comments 6 comments

Mary Merriment profile image

Mary Merriment 3 years ago from Boise area, Idaho Author

Thank you unknown spy. I love beads. I probably have more than I'll ever need around here. But finding ways to get creative with them is so much fun!


unknown spy profile image

unknown spy 3 years ago from Neverland - where children never grow up.

amazing and very beautiful! i love the creativity in this hub. i used to buy lots of bead and nylon then form it into necklaces or bracelets then give it as gifts to friends.


Mary Merriment profile image

Mary Merriment 3 years ago from Boise area, Idaho Author

Hi Millionaire Tips. I'm pretty fond of how these bead ornaments look on my tree. Thank you so much for visiting!


Millionaire Tips profile image

Millionaire Tips 3 years ago from USA

These are really beautiful Christmas ornaments. I am sure they look fabulous with the twinkling lights on the tree. Voted up.


Mary Merriment profile image

Mary Merriment 4 years ago from Boise area, Idaho Author

Thank you very much Prasetio.


prasetio30 profile image

prasetio30 4 years ago from malang-indonesia

Beautiful Christmas ornament. You are very creative and thanks for share with us. It makes the Christmas celebration more colorful. Voted up!

Prasetio

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working