What is Solar Energy?

One of the most common types of renewable energy in USA, UK, UAE, Germany, France and other parts of the world is solar energy. Solar energy started in France. There are other sources of renewable energy like wind energy, but we are going to focus on solar energy here. One of the best ways to cut your electric bill is to build your own solar panel and get the source of your power from there. It is possible for you to build a Do It Yourself solar panel which will be enough to power the whole of your home. Many individuals are doing this and yours won’t be an exception. All you need is the manual and tools to guide you through, and in the space of 2 hours you can devote your time to learn the instruction guide and then apply it to make your own solar panel.

Already made photovoltaic, also known as solar panel, can cost around $15,000. This is an expensive way to own a solar panel, but if you build it by yourself you will be able to save a lot of money. It is possible to build yours for as little as $200. You need knowledge of where to get the cheap supplies for the solar panel and the guide to follow to make yours.

Benefits of Solar Energy

Power from solar energy has many benefits. Some of them are:

- You will be able to live off grid.

- You will help to save our planet from global warming because it is a green form of energy.

- You will save 80% of all your energy cost.

- You will be reducing our rate of dependency on foreign oil because you are not going to be using oil anymore as an energy for electricity.

- Solar panel lasts long, once you set it up, it is on and running. At the end of the month, you won’t even border about any utility bill coming your way.

- You will get a reduction in your energy tax because you are going green.

Some of these are the benefits of solar energy. From what you have seen, you must be convinced that it worth it going green by using power from solar energy.

What You Should Start to Use Solar Energy Starting From Today?

Research has it that in years to come more percentage of our planet will be covered by water. This is because of the way the artic ice is melting fast. It is melting fast and polar bears that survive under them are endangered species. I guess you know the reason why the artic ice is melting fast. It is because of carbon emissions and carbon emissions coming from industries that use coal and oil as a source of energy. This justifies the reason why you should opt for solar energy or you could be inside your house one day, and come out to see that raising water is fast coming to your house.

Also carbon emissions are the reason for hurricane, heavy wind blow and some of the natural disasters happening in our world today.

What You Need To Build A Solar Energy?

I am a scientist, but I am an independent researcher and someone that is very conscious of the environment. The components you need to start coupling your solar panel are:

Lumber

Tin wire

Silicon

UV Protector

Voltmeter

Rosin flux pen

Solar cells

Solder

Plexiglass

How to get these parts?

Gathering all the components for a solar panel is a crucial phase of this project. You can get them online or visit your local store. You can find these tools in your nearest hardware store. It is possible to get a set of solar energy kits. These kits contain all you need to set up your solar panel. My advice to you would be to visit your local store and at least bargain. It won’t be possible for you to get them cheap online or even make a bargain.

Getting all of these components won’t pass $500, it all depends on how you make the bargain. You will even get all of them cheaper if you do so at your local scrap store. After you have got the components, what is left next is an instructional manual.

Even if you are not familiar with all the components named above, you can as well ask for them at your nearest hardware store. It is as easy as asking “do you have this or that”.

Do It Yourself Solar Panel Step By Step Instructions

Step 1: cut the lumber

This is process of cutting your lumber to the proper size. It is necessary to cut it to the appropriate size to enable the solar cells to wrap up all the areas of the lumber. The amount of solar cells which you can utilize differs based on the size of the solar panel you need. Usually, about 80 solar cells are going to generate about 100 watts of power. Though it is not much but it is able to supply power to 8 compact fluorescent light bulbs. As a beginner, you are meant to start from somewhere first. Maybe after sometime you can connect many solar panels jointly in order to generate additional power that will be able to power the whole of your home.

Step 2: UV Protector

After you have cut the lumber to its suitable sizes. The next step is to use some coats of the UV protector to cover the lumber.

Step 3: flux pen

After that, track to see that the flux pen runs over the solder regions on the solar cells to aid to make the wiring down. It is a very crucial phase to see that you have linked all the solar cells well, and no wire is left unconnected.

Step 4: join the solar cell using solder

When it is time to join the entire solar cells using solder and the wiring to link the cells, you should see that you solder one row after the other at a time, and don’t try doing all of it at a particular time. When you have fused all the rows using solder, it is time to link all of the rows as one with the help of the tin wire.

Step 5: Link the solar cells to the lumber

The next step is to use silicon to attach the solar cells on the surface of the lumber. There is no need to utilize excessive silicon for the phase.

Step 6: link the wire across the lumber

At this stage, there should be 2 ends of the wire suspending at the parts of the solar cells. Bore a range of opening in the lumber. This is the opening where the wire will pass through till it gets under the lumber.

Step 7: append boundary line at the frame of the lumber

You should make some border all over the plywood to encompass your solar cells. It can be in the form of a frame-like image. You can apply silicon as your glue for the boundary. This is necessary so they won’t be any leakage of water on top of the solar cells. To protect it further, tighten its boundaries using wood bolts.

Step 8: join the plexiglass to the boundary, which is the border of the lumber

You should join the plexiglass to the boundary of the solar cells in order to cover it. Employ silicon to join it. Just as the initial step, you should bolt this section in order to give an extra support. Bore little holes in the plexiglass that are less than the size of the screws you are making use of, if you don’t you can break the plexiglass.

Step 9: close up any opening on the plywood

I hope you are still aware of the openings you made in step 6. You will need to close up the opening all over the wires using silicon. You should also seal up additional opening you see around the solar panel to make it professional.

Step 10: dampness prevention

Even though the solar cells are fully covered by the plexiglass and silicon epoxy, there is still a possibility of moisture forming inside the solar panel. In order to avert moist, you should bore an opening close to the base of the solar panel far from the wiring. See that you solder the under to prevent water from getting under anytime it rains. It will affect the durability of your solar panel.

This is just the fundaments of how to build a solar panel

Are you lost somewhere?

You are meant to be as you are attempting to create a solar panel from written text guides like this. It is hard to start any do it yourself home development project using instructions like this one. This guide provides you with a plan on the things needed to make a solar panel from home – you require the components which are usually accessible at any nearby hardware store and the rest can be seen at the place if you are aware where to find them.

Do It Yourself Solar Panel Construction Video

Comprehensive illustrations using diagrams and videos will eradicate all mix-ups and hasten the production period of your solar panel. Fortunately for you, I know of a guide that gives the step-by-step guide required to build a solar panel using videos. It is called earth 4 energy. Earth 4 Energy is a Do It Yourself video guide which contains the step-by-step instructions which you can follow to build a working solar panel.

Get A DIY Solar Panel Video Guide