Gas Saving Air Injection Products

Photo Credit: DL

Many of the gas saving devices on the market right now fall into the category of a vortex generator. The name of it sounds like something very fancy and that would be complicated to work with. Once you understand the concept of it though it is easy to see how people would assume it could help cut down their use of gas.

This allows there to be air mixed between the air cleaner and the intake manifold. The process resembles a tornado but on a much smaller scale. There isn’t any type of additive with various ingredients being added to your vehicle which makes consumers happy.

Since there is an unlimited supply of air nothing has to be added to it later on either. These products claim to work by mixing more air with the gas in your vehicle than what is normally found in it. This is to allow it to burn cleaner when it enters the combustion chamber.

Yet what you will find is that your speed is reduced due to this method and so that can result in gas being saved. For those that drive over 60 miles per hour the most savings will be evident.

However, if you plan to be taking that vehicle on a highway with a speed limit of 75 miles per hour you will have a hard time getting to that speed as well as maintaining it. Your vehicle may start to run sluggish.

Your vehicle will have to work very hard and that can result in more wear on it. If you have to slow down or stop often it will also reduce fuel efficiency. When you consider the distance a person may travel for fun or to get back and forth to work at those higher speeds it can really be a recipe for disaster for our vehicle. Some of the air injection products offered claim that they can create more heat, and that reduces friction.

As a result of less friction there is less fuel consumed. It is said that there is less work for the liquid gas to be changed into a vapor. The understanding of this particular technique is complex to many people. Therefore they don’t look into it any further.

What is often ironic about gas saving devices and products is that is seems the more complicated they are to understand the more people invest in them. The general consensus of this is that it must be some scientific formula that will work and so it doesn’t matter if the consumer understands it or not.

Well, you can be sure that the manufacturers and the marketers know this. If the gas saving device is too simple then it won’t hold water with most people. Add some tricky terms though and a process that is complex to follow and it will seem logical in many ways. After all not everyone knows ways to save money on gas so they may be on to something.

Regardless of if you understand what that process entails or not, the testing that has been done on many products by professional organizations shows they don’t really work. There isn’t enough significance with that process to allow you to save money on your gas expenses.

You need to get the name of the particular product you are interested in and do your own research on it as well. Chances are there have been reviews of it from individual consumers. You will also find those done by experts that aren’t biased one way or the other. They call it as they see it simply by monitoring their gas mileage before and after using it on a particular vehicle.

All of the data that they use is recorded and shared so there isn’t any secret about how they arrived at their final report on things. It is hard to argue with such testing methods when you can see they have done every single step by the book and not gotten the promised results with the given product.

One of these testing gurus is Popular Mechanics. They are well known for offering information and advice about various types of vehicles. They stay on top of current issues and events including high gas prices. They aren’t about to allow their loyal readers to be taken for a ride so listen to what they have to say.

There are many air injection products for gas saving offered on the market. Yet according to Popular Mechanics many of them never even get around to actually adding more air to the fuel like they claim. They believe it just isn’t possible for this to really take place with the design of the vehicles system.

This is due to the fact that there is likely to be too much space between where the air intake is and where the fuel is mixed. It doesn’t really matter which type of vehicle you are driving around in, this set up is standard. You can have it modified which will cost you a great deal of money.