Going Green - Energy Saving Light-Bulbs - what you might not know!
84
Global Warming Debate
This hub is not intended to debate the whole Global Warming Debate; while I may disagree with much I see on TV about this whole issue, there are obviously signs that something is going on in the world.
I see nothing wrong with going green, and generally no harm can come of humanity changing its habits and trying to reduce carbon footprints and lower our impact on the world.
However, going green can have dangers that many are not aware of; take the energy efficient light-bulb. While it saves energy and staves off one environmental issue, did you know that it actually has hazardous mercury in it? Therefore if the energy efficient light-bulbs are not disposed of correctly they can cause harm, and create a different environmental issue.
The Lightbulb
The humble light-bulb is being brandished about as the hero of the green initiative. Energy saving light-bulbs are the rage, and soon you won't be able to buy the standard filament oriented light-bulb.
- Did you know that the energy saving light-bulb contains mercury and should not be put in regular garbage?
- Did you know that you need to be very cautious about removing broken energy saving light-bulbs?
The key is to read the packaging carefully to ensure you know the risks, and how to handle the bulb if it breaks.
The benefits of the energy saving light-bulb are varied:
- Efficient: these light-bulbs are four times more efficient than regular light-bulbs and last up to ten times longer. (My experience is that they last about three to four times longer)
- Cheaper - while expensive, they will use about 33% of the energy of a traditional light-bulb. You may not save much money, but this will increase as they become more efficient - however if you're saving the environment, then the cost doesn't really matter.
- Reduces pollution - the statistics say that when everyone begins to use these light-bulbs, then we will be able to close 90 power stations - thus reducing the carbon footprint.
Process to clean up if you break or crush an Energy Saving Light Bulb
Ventilate the room
- All humans and pets should stay away from the room where the bulb has been broken, and should make sure they do not touch the breakage.
- Open windows and leave the room for 30 minutes.
- Shut of air conditioning.
Clean-Up Steps for Tiles / floors (or other hard surfaces)
- Scoop up fragments and powder using cardboard (probably best to wear rubber gloves if you have them). Place fragments in a sealed container or sealed plastic bag.
- Use sticky tape to get up all remaining fragments from floor. (Don’t use a vacuum cleaner or broom as this is likely to cause dust to enter the immediate atmosphere)
- Wipe floor clean with a damp paper towel and seal in a sealed container or sealed plastic bag.
- Wipe the area clean with damp paper towels or disposable wet wipes and place them in the glass jar or plastic bag.
Clean-up Steps for non hard surface (rug or carpet)
- Where possible, follow the instructions for the hard surface above.
- Vaccuum if needed once all visible debris has been removed.
- Remove the vacuum bag and put in a sealed plastic bag.
Disposal of Clean-up Materials (Check with local authority for any additional laws for your area).
- Remove all cleaning materials and place them in trash container (or take them to a recycling center if required by your local authority).
- Thoroughly wash hands after disposal.
- It’s probably a good idea to keep ventilating for the next few times you vacuum this area.
Comments
BkCreative: there are an awfully lot of people making millions out of the green issue - while there are good sides to green products (such as energy saving and carbon footprint reduction, there are also many negative sides). Most people think Electric cars are superb - but in the US - the electric is produced in coal burning power stations - so there's still a carbon footprint - a better solution is to have far smaller engines etc...
Thanks so much. I knew about the disposing of the bulbs, I did know know all the rest. We have been replacing all out bulbs with these as they burn out over the last year. This makes me think twice.
Sandi3m: good, the whole point is to make people think twice - as long as we treat these bulbs with 'respect' and dispose of them correctly then there's nothing wrong with them - my concern is that how many people won't do this, or simply don't know they should!
Did you know that in the UK it now illegal to use anything but energy efficient light bulbs?
And I haven't seen any warnings about the mercury etc.
Mind you - I do live in the Middle East so there might have been some educational stuff that I missed
If you can afford it LED light bulbs use far less energy and don't have the hazards. They can be pricey however.
GrennMAthDr: I'm going to look into LED light bulbs - I like working out efficiencies - if over time it saves money, or doesn't cost more then I'll go for it!
LED bulbs are good for places where you only need dim light, but there are a lot of applications they're just not bright enough for -- yet, anyway. I've got a few, but I'm using compact fluorescents in most places.
Excellent hub. I especially like the steps in cleaning up a broken Compact Florescent Bulb. I knew they had mercury in them, but had no idea there was a recommended way to clean up after a break. Great advise and thanks for sharing it.














BkCreative says:
6 weeks ago
So true! All horrible but true! Who is getting rich off this horror show? Just your list of how to clean up the bulb shows the inherent dangers. Imagine a child deciding to change a bulb one day and/or dropping it.
I've also written a hub about another danger - and that is how these bulbs are harming skin.
Looks like, once again, we hubbers, have to save (some of) our world.
Thanks for this most useful (but disturbing) information!