Why do you have to assemble your computer when you can have the technician of the store or seller can assemble it for you.

For me i choose what brand and specs i want to put in my computer. I don't buy anything that is not needed and usually i bought the parts from different stores that's why i cannot ask the store technician to assemble it for me. It also cost an extra charge for the service.

Why do i have to pay for the service when i can do it myself.

For you who want to assemble your own computer and proudly tell you friends you assemble it yourself here's how to do it.

This is the basic assembly, you just need to put the important parts to make the computer run.

This is the casing of the computer looks like when you first open it.

You can see and empty space whith small holes for your motherboard to fit in.

You need to put this in the holes where the hole of your motherboard will fit.

This is to hold the motherboard in place since it cannot just be screwed without this one.

You can see some of this in the picture below

Put this on the back side of the casing. This is included in your motherboard.

You can see the use of it when you see it closely.

Now place the motherboard and screw it.

Put the wires in the proper place. Just read the manual or the motherboard, there should be a label on what should be placed in the slot.

Now open the CPU slot and remove the plastic if it has a plastic cover.

The CPU or Processor slot usually have two metal lock.

One holding the Processor and one that locks in the processor tightly.

Place the CPU fan on top of the CPU. There are different types of CPU fan lock.

This motherboard has four holes. The CPU fan has four locks that fit into the hole of the motherboard.

You should press all the four locks at once or read the manual of the processor. There should be an instruction on how to install the CPU fan.

The power supply usually comes along when you buy a casing and usually it is already installed in the casing.

But if it is not yet installed it's very easy. You can see holes in the back of the power supply where you can put a screw on it.

Insert the cord in the proper slot. Usually there are two type of wire there.

Insert the RAM in the RAM port.

Press the two sides of the RAM until it locks.

Available on Ebay NEW Intel D865GVHZ Hazelton Motherboard PIV SKT 478

And tadah... Your done.

Don't forget the hard disk. Don't tell me you don't know how to install the hard disk.