create your own

How to assign IP Addresses to the client & server PC?

88
rate or flag this page

By rajkishor09

In this tutorial we will learn how to assign IP address to a computer. Before that I should make it clear that every PC will have its own unique IP address. Assigning same IP to other PC will give you “duplicate IP address” error. IP is like our mobile no. it has to be different from others. The IP address, we are going to assign, will be static & assigned manually. For this, follow the following procedure attentively. 

1. First open My Network Places properties.

My Network Places properties.

2. In the properties window, under LAN or High-Speed Internet heading select your Local Area Connection.

Network Connections

3. Now a new window should popup, titled "Local Area Connection Properties". Here you have to select Internet Protocol (TCP/IP) option then click on properties button. This will again bring a new popup "Internet Protocol (TCP/IP) Properties".

LAN card properties


Bestseller at Amazon.com

1. D-Link Wireless N Gigabit Router DIR-655 D-Link Wireless N Gigabit Router DIR-655
Price: $110.95
List Price: $149.99
2. Apple MacBook MB881LL/A 13.3-Inch Laptop Apple MacBook MB881LL/A 13.3-Inch Laptop
Price: $1,169.00
List Price: $899.00
3. Zonet Kvm3322W 2-Port Usb Kvm Switch W Audio + Bluetooth Zonet Kvm3322W 2-Port Usb Kvm Switch W Audio + Bluetooth
Price: $36.71
List Price: $47.99
4. Acer Aspire One AOA150-1359 8.9-Inch Copper Netbook - 6.5 Hour Battery Life Acer Aspire One AOA150-1359 8.9-Inch Copper Netbook - 6.5 Hour Battery Life
Price: $279.99

4. In this window you have to select "Use the following IP Address" radio button and give the given value as shown in the picture. Exactly like this.

NOTE : To understand this tutorial easily, I would recommend you to assign this address to that computer which would be your server (in case if you want to share internet). Otherwise you can assign this address to any of your computers.

Internet Protocol(TCP/IP) Properties

5. You will be happy to hear that you have successfully assigned IP address of your first PC, now it’s time for the second PC. The process will be the same; the only we have to change or assign IP address to the second PC. So, we will begin from Step 4. On second PC we have to change IP address to “192.168.0.2” and subnet mask will be the same. You can see that in below image. If you have more PC to connect to network, so your next PC IP address will be “192.168.0.3” and so on.

IP Address assignment on Client PC

Now you need to check the connectivity between these PCs, we will confirm this connectivity with ping command. Go to Run or press Windows Key+ R and type “ping 192.168.0.1” from client PC, you should get following replies.

Ping result (Click to enlarge)

If you don’t get reply similar to this then you need to check this from beginning. You can post comment here and I will try to solve your problem as quickly as possible.

Comments

RSS for comments on this Hub

rajkishor09 profile image

rajkishor09  says:
9 months ago

Feel free to ask questions related to this topic, i'll try to answer as early as possible.

SQA Guy  says:
8 months ago

Dear,

That was handy... For those who switches around networks (obviously in a lappiee) will use some sortta IP managers and switchers.. They are easy to use as well.

Mona Lisa  says:
6 months ago

My first PC has XP and the second one has Vista HP. I did all the settings above with no good result. I used crossover, then switch, disabled firewalls, Nothing

rajkishor09 profile image

rajkishor09  says:
6 months ago

Mona Lisa: I think you followed wrong tutorial for XP-Vista sharing, you should check this.

http://hubpages.com/_eknow/hub/How-to-setup-LAN-be

amit  says:
5 months ago

i tried all the steps instructed by you, but still i am not able to ping from client pc to server whereas 'ping server to client' is perfectly working , plz suggest what should i do asap THANX for ur past and future assistance, u r doing a good job by sharing ur knowledge

John Aryan  says:
4 months ago

Hi there

I am facing problem to create two different LAN on a single hub. I mean two Desktop pc are connected on a hub and i gave two different class address (192.168.0.2 for one pc, 172.16.0.3 for another).but i cant ping one another.so what should i do now to get the problem solved.i need to make the different LAN on a single hub for my thesis purpose.so please if anybody know then reply.looking forward to hear from you.

Thanks

Regards

Aryan

Wave Rapture  says:
4 months ago

Hi so i have one Prob with finding the properties cause there is no "LAN" in my Network connections. There is only my pc and this of my Bro cause im connected with him by using the router (Livebox). But there is no "Local Area or High Speed..."

Wave Rapture  says:
4 months ago

My Lan Icon isnt there

vrajput profile image

vrajput  says:
4 months ago

Your hubs Is really very nice

jack  says:
2 months ago

i have a lan connectivity among 7 pc's i wnat to share internet and printer

anthrax  says:
2 months ago

Hey Raj... i already followed your steps. the problem is that my pc and the client pc only received only 1bytes per sec of data. need help here

rajkishor09 profile image

rajkishor09  says:
2 months ago

Mr. anthrax check you cable color code and RJ45 connector.

HACKER  says:
9 days ago

how to make broadband connect faster?

send to my email:xman9042@yahoo.com

Submit a Comment

Members and Guests

Sign in or sign up and post using a hubpages account.


optional


  • No HTML is allowed in comments, but URLs will be hyperlinked
  • Comments are not for promoting your hubs or other sites

working