create your own

Liquid Rubber

72
rate or flag this page

By Jordan Heffron


Have you ever had the chance to use liquid rubber? Well, there is a great new type of liquid silicone rubber called “Liquid Rubber (EPDM)” – which has plenty of advantages over other types of adhesives. In some cases, using liquid rubber is clearly the best choice for a solid adhesive, but people do not seem to understand what the stuff is, where they can buy it, and how it works. Due to liquid rubber not being a very mainstream product, many people shy away from using it and instead choose a different substance that is clearly not as effective.

Liquid silicon rubber does a great job at adhering to any surface. It is very close to the chemical makeup of EPDM, however, it is better to use due to the fact that it is purely liquid. Liquid rubber coatings are usually able to adhere to any surface on their own and form a picture perfect bond with anything. Because liquid rubber can form such a powerful bond, it is recommended to be used in order to seal up any major leaks.  It is definitely a great rubber seal product.

One great thing about liquid latex rubber is the fact that it is able to withstand extreme temperatures. It is estimated that liquid rubber is able to be applied and form a bond with any substance in an environment that falls within the range of temperature from negative forty-five degrees Fahrenheit, all the way up to three-hundred degrees Fahrenheit. Basically, this stuff takes a crazy amount of heat and is a very easy and effective substance to work with when doing repair work.

When most people use liquid rubber, they are grateful that only one coat of this stuff is required. If you ever tried liquid rubber, you would know that it doesn’t take more than one coating to be successful. Most people do not understand how powerful this stuff actually is for repairing. If you ever decide to use liquid rubber coating, you must be careful that you apply it to the exact place that you need it to cover; otherwise you will have an extremely difficult time removing it.

Another great feature of liquid silicone rubber is the fact that you will not need any form of primer or to apply it multiple times to the surface of your leak. Liquid rubber is very easy to use yourself – even if you are a complete amateur. You just find the place that it needs help seal, and then apply one coating of liquid silicon rubber and you are finished. There is no clean-up required, no extra future coating, and all of your work is done; this is because liquid rubber forms such a powerful bond in comparison to virtually all other substances and forms of putty.

If you want to make a substance “waterproof,” then look no further than liquid silicone rubber. This liquid rubber will do a nice job at sealing heavy amounts of water pressure throughout the entire year. You will not need to wait hours after you’ve applied the liquid rubber to the surface for the water-proof effect to happen. Immediately after the liquid rubber is applied to any surface, it takes effect and holds an impeccable surface-level-bond.

Liquid rubber has been demonstrated to be favorable over all forms of acrylics and forms of elastomer-substances. Liquid latex rubber has even been shown to have nearly triple the life-expectancy than any form of sealant. You can apply it anyway you need it – whether that be a vertical application, horizontal, or at some other weird angle. Liquid rubber is able to form a completely seamless bond with any type of surface. This is what separates it from the pack of other adhesives. Liquid rubber may cost you a little more, but that is due to the fact that it is such a valuable product to have around.

Liquid silicon rubber is always helpful to have around the house for when you need repair work done. It is a highly beneficial product that is worth every penny. In fact, I just used the stuff to help patch up a roof leak that we’ve had troubling us for years. The liquid rubber prevented all water from leaking through during our last heavy rain storm. The fact is, that this stuff actually works and seals up leaks – unlike other substances that I’ve tried in the past. I actually had not known about the stuff until my neighbor recommended it because it worked for a leak on his house-siding. Anyways, I will continue to use liquid silicone rubber when needed and I encourage you to try the stuff if you haven’t already; it will do a great job at sealing your leaks.


Liquid Rubber Coating

Mold Builder Liquid Latex Rubber 16oz/473ml Mold Builder Liquid Latex Rubber 16oz/473ml
Price: $13.59
List Price: $15.99
Plastic Dip Intl. 18201 Plasti-Dip Plastic Dip Intl. 18201 Plasti-Dip
Price: $6.25
List Price: $7.05
Permatex 29208 The Right Stuff Instant Rubber Gasket Maker Permatex 29208 The Right Stuff Instant Rubber Gasket Maker
Price: $11.71
List Price: $42.64
Trident Neo Coat - Brush-on Liquid Rubber Trident Neo Coat - Brush-on Liquid Rubber
Price: $11.98

Foreign Liquid Rubber Video

Print   —   Rate it:  up  down  flag this hub

RSS for comments on this Hub

Sue Bailey profile image

Sue Bailey  says:
6 months ago

Wow I had no idea there was so much to say about this subject. I'm convinced enough to try it.

Jordan Heffron profile image

Jordan Heffron  says:
6 months ago

I encourage you to use some for a repair sometime Sue. I consider it a must-have item for patching things up around the house!

Submit a Comment

Members and Guests

Sign in or sign up and post using a hubpages account.


optional


  • No HTML is allowed in comments, but URLs will be hyperlinked
  • Comments are not for promoting your hubs or other sites

working