create your own

The transformation of my Jeep Suzuki Samurai

64
rate or flag this page

By Richimag


    I do 4x4 from small boy, and had this Suzuki Samurai since 1993, always wanted to make a big change in him, then about two years ago started the project, it took me 6 months to make the change and still lack some things but now it can move legally and to do some off roads, the project is large and has lots of detail but I will only leave a few here.

   The transformation started with the repair of the plate, had a lot of rust and then dismantled it all, screw the bolt in order to do a good job, then came the painting, I painted a black color, is not recorded in the photos but I bought another Suzuki Samurai for take a few pieces that I had ruined, my Suzuki Samurai is Spanish version and bought a Japanese version because the pieces are much more quality, I switched the brakes pump and all brake system, changed the engine, the 1000cc to 1300cc, traded  the hard top by the soft top, I changed the suspension springs to elevate 10 inches, changed the transfer box and reduce the torque at 117%, xuuu, a tractor was wild, I changed the tires and wheels for greater height and width, and now lack the snorkel and their respirators boxes and axles, wider fender and exhaust, I'm waiting for money to do it (hehe). Good Wild Roads.

New springs to give more height
New springs to give more height
taller
taller
New engine, before it was 1000cc and now 1300cc
New engine, before it was 1000cc and now 1300cc
New gearbox and transfer box reduced 117%, is a tractor power :)
New gearbox and transfer box reduced 117%, is a tractor power :)
new painting
new painting
New tires hehe!!!
New tires hehe!!!
New rims
New rims

Replaced Parts

gearbox  Support
gearbox Support
I rasped the edges of the suspension springs to be softer
I rasped the edges of the suspension springs to be softer
I painted the axles and put spacers to compensate the height
I painted the axles and put spacers to compensate the height
new drive system to compensate the height
new drive system to compensate the height
new engine supports
new engine supports
I modified the hinges of the doors to be taken off at any time in seconds
I modified the hinges of the doors to be taken off at any time in seconds
the fenders I want to buy
the fenders I want to buy
last picture taken
last picture taken


still a few things to finish but I need more money ..


Print   —   Rate it:  up  down  flag this hub

Comments

RSS for comments on this Hub

No comments yet.

Submit a Comment

Members and Guests

Sign in or sign up and post using a hubpages account.


optional


  • No HTML is allowed in comments, but URLs will be hyperlinked
  • Comments are not for promoting your hubs or other sites

working