Wireless Electronics and your Lifestyle.

How to pair your BlueTooth Headset with your cell phone.

This could possibly be generic and yours could differ slightly but you will find that the pairing of most BlueTooth Headsets sync with most cell phones in the same fashion.

Step #1.

First thing you need to do is gather your cell phone and your BlueTooth headset together. You must enable your bluetooth feature on your cell phone first. Turn your phone on and go to your menu. Find the settings tab under the menu. Under settings, look for the bluetooth feature. Select bluetooth. Your phone will usually have bluetooth on or off. make sure to turn it on.

Step #2.

Turn on your blue tooth headset. The BlueTooth light will usually blink. What must be done now, is to pair or sync the headset with your cell phone. This is done by holding the talk button down for a few seconds until the blue light stays on steady. Once the light is steady blue, you will return to your cell phone.

On your cell phone, go back to BlueTooth devices. Now go to "my devices". Now, do a search for new device. At this time what happens is your cell phone will search for and find your BlueTooth Headset. This could take a few seconds for your cell phone to scan. When found, your cell phone will indicate it in your devices. Now you must select that device. The cell phone will connect to the headset. When this happens, you will usually see your BlueTooth headset flash which indicates a wireless connection between them.

You may run into a situation where the BlueTooth headset will ask for a password. Your headset manual will clearly state the password. The admin password is usually just 4 zero's.

I hope this helps you. You may have a slight variation in connecting your bluetooth headset to your cell phone but this will give you a general idea of what to expect.