There are some problems which are beyond human nature but the technology is the blessing for human being. The problem of burnt hard disk data recovery are beyond the scope of any equipment thus no data could be recovered. This problem could occur any time as this is unfortunate things happens in life accidentally or by some mishappening.

The reason for Burnt hard disk recovery is that the magnetic layer on the hard disk was too badly burnt, there is also a lot of molten plastic on the platters which while removing could cause damage to the platter and if platter would be damaged then it will be data as well as economical loss. The drive is so badly burned that there was no Printed circuit board (PCB) components or markings left and the label had completely burned off. This meant that locating a donor under normal circumstances could not possible.

Once you locate the donor you need to assess the drive for damage in the clean room. It is likely the heads will have heated up and damaged the Printed circuit board (PCB) voice coil connections or even the heads themselves. If the platters are intact we would have to move them to a working donor using new heads and recover the data by using tools as platter exchange tool, read write head exchange tool.