Schools and Training for High Paying Careers with only a two year degree

When searching for a new career or looking for schools for job training, it is easy now to go online and find helpful websites and links and get all the information needed before making the choice.

Here is a list of high paying schools and the types of school and training needed to be prepared for your new career.

• Dental Hygienists

Dental Schools

Employment of dental hygienists is expected to grow 30 percent through 2016, for all occupations. This projected growth ranks dental hygienists among the fastest growing occupations, in response to increasing demand for dental care and the greater use of hygienists.

• Funeral Directors

National Funeral Association: http://www.nfda.org/

Private vocational schools offer special programs to train funeral directors, called mortuary science programs. They take nine months to three years to complete. A few colleges also offer two-to four-year programs in funeral service. In addition, a person will probably need to serve an apprenticeship of about one to three years during or after formal training.

• Registered Nurses

Nursing Programs, School and Training http://www.medicaltrainingdirectory.com/

• Engineering Technicians

Those who want to work as engineering technicians should have at least an associate degree in engineering technology, although some employers will hire candidates who don't have formal training. Those who plan to become engineering technicians can expect to take courses in college algebra and trigonometry and basic science. Other coursework depends on specialty. For example, those who want to become electrical engineering technicians will take classes in electrical circuits, microprocessors and digital electronics.

• Court Reporters

http://education-portal.com/

Court reporting is an exciting field for a student to get into. Court reporters transcribe judicial meetings and proceedings so as to ensure a complete and accurate legal record.

The different methods of court reporting:

1. stenography,
2. real-time court reporting,
3. electronic reporting,
4. voice writing.

The amount of training required to become a court reporter varies depending upon the method of reporting. It takes less than a year of schooling to become a voice writer, while most electronic reporters and transcribers pick up their skills on the job. The National Court Reporters Association offers certification as a Certified Court Reporter (CCR).

• Radiological Technicians

Schools and Training http://www.allalliedhealthschools.com/faqs/radiographer-training.php

Certified radiologic graduates often take additional certificate programs in the following advanced imaging fields:

• Nuclear Medicine Technology
• Mammography
• Computed Tomography (CT scans)
• Magnetic Resonance Imaging (MRI)
• Cardiovascular-Interventional Technologies

• Cardiovascular Technologists

Training and Schools: http://www.trade-schools.net/program-directory/cardiovascular-technologist.asp

Cardiovascular technicians and technologists aid doctors in finding and caring for illnesses or injuries involving the heart or the blood vessels. There are three main specialty fields within cardiovascular technology practice-vascular technology, echocardiography, and invasive cardiology. EKG technicians, sometimes known as cardiographic technicians, are cardiovascular technicians who are specialists in stress testing, Holter monitors, and EKGs, or electrocardiograms.

• Sales Worker Supervisors

Schools and Training: http://www.collegegrad.com/careers/marke09.shtml

Sales worker supervisors direct and manage salespeople. They also keep track of merchandise and help customers.

• Machinists

Schools and Training: http://education-portal.com/machinist_training.html

Machinists use machine tools, such as lathes, milling machines, and machining centers, to produce precision metal parts. Although they may produce large quantities of one part, precision machinists often produce small batches or one-of-a-kind items. They use their knowledge of the working properties of metals and their skill with machine tools to plan and carry out the operations needed to make machined products that meet precise specifications.

• Surgical Technologists

Schools and Training: http://www.directoryofschools.com/Surgical-Technologist-Schools.htm

Also called scrubs and surgical or operating room technicians, assist in surgical operations under the supervision of surgeons, registered nurses, or other surgical personnel. Surgical technologists are members of operating room teams, which most commonly include surgeons, anesthesiologists, and circulating nurses. Before an operation, surgical technologists help prepare the operating room by setting up surgical instruments and equipment, sterile drapes, and sterile solutions.

They assemble both sterile and non sterile equipment, as well as adjust and check it to ensure it is working properly. Technologists also get patients ready for surgery by washing, shaving, and disinfecting incision sites. They transport patients to the operating room, help position them on the operating table, and cover them with sterile surgical "drapes." Technologists also observe patients' vital signs, check charts, and assist the surgical team with putting on sterile gowns and gloves.

These are fields that have fast growth rates and continue to be in demand. Earning potential is high and is a great solution for future career change ideas.

• Respiratory Therapists

http://www.collegeinfo.com

Respiratory therapists and respiratory therapy technicians-also known as respiratory care practitioners-evaluate, treat, and care for patients with breathing or other cardiopulmonary disorders. Practicing under the direction of a physician, respiratory therapists assume primary responsibility for all respiratory care therapeutic treatments and diagnostic procedures, including the supervision of respiratory therapy technicians. Respiratory therapy technicians follow specific, well-defined respiratory care procedures under the direction of respiratory therapists and physicians.

• Science Technicians

Schools and Training: http://www.collegegrad.com/careers/proft69.shtml#tra

Science technicians use the principles and theories of science and mathematics to solve problems in research and development and to help invent and improve products and processes.

Technicians set up, operate, and maintain laboratory instruments, monitor experiments, make observations, calculate and record results, and often develop conclusions. They must keep detailed logs of all of their work-related activities. Those who perform production work monitor manufacturing processes and may be involved in ensuring quality by testing products for proper proportions of ingredients, for purity, or for strength and durability.

• Heavy Equipment Mechanics

Training and Education:

http://www.workforcedevelopment.com/vehicle/heavy.html

Heavy equipment mechanics repair machines used in construction, logging, and other industrial work. They maintain equipment so that it operates properly and safely. When equipment breaks down, they examine it for defects. Mechanics often use hand-held computers to diagnose components that need repair. They may take the equipment apart to inspect or repair various parts. Sometimes they use jacks or hoists to lift or move large parts.

Heavy equipment mechanics check parts for damage using gauges and meters. They may clean parts by spraying them with or soaking them in solvent. They grease and oil parts that need it. Mechanics repair or replace damaged or worn parts. They use hand tools to remove the parts and machine tools to repair some parts. If necessary, mechanics use welding equipment to weld broken frames or parts. When repairs are complete, they reassemble the equipment and test it for performance and safety.

• Automotive Body Repairers

http://www.careeroverview.com/auto-body-repair-careers.html

Traffic accidents result in thousands of damaged automobiles each day. While some automobiles may be totaled, many can still be repaired and fixed up to look and run like new. An automotive body worker will remove fixable dents, replace parts damaged beyond correction, and straighten out bent bodies. These repairers work on a variety of different vehicles, mostly cars and small trucks, but sometimes will be asked to work on buses, large trucks or even tractor-trailers.

Vehicles with damaged frames or sections can be worked on by automotive body repairers with special equipment. Repairers use alignment machines powered by hydraulic pressure to realign damaged parts of the vehicle. Some vehicles are designed without frames, known as "unibody" vehicles and they have to be realigned precisely to factory settings to work again. By relying on benchmark systems, repairers can accurately measure each portion of the body to assess how far out of alignment it is before using the alignment machines to move it back to its original position.

• Paralegals

Training programs: http://www.southcoastcollege.com/

Although most employers do not require certification, earning a voluntary certification from a professional society may offer advantages in the labor market. The National Association of Legal Assistants (NALA), for example, has established standards for certification requiring various combinations of education and experience. Paralegals who meet these standards are eligible to take a 2-day examination. Those who pass the exam may use the Certified Legal Assistant (CLA) or Certified Paralegal (CP) credential. The NALA also offers the Advanced Paralegal Certification for experienced paralegals who want to specialize. The Advanced Paralegal Certification program is a curriculum based program offered on the Internet