Jindal exam papers for the ALL INDIA GET RECRUITMENT TEST are not available anywhere in the net. So tried all the available forums and finally collected some material related to Mechanical engineer exam. The information collected is from the people who have successfully passed the exam.

The exam pattern goes this way for the 2009-10 entrance exam which is to be held on October 4th of 2009. The paper has 55 questions based on aptitude and 60 questions based on technical.

Some of the technical questions asked in the previous papers are

Which metal/alloy is used in railway tracks _____ ?
2. Hydraulic press works on the principle ______?
3. If e=0 body is said to be ______?
4. Which has max poisons ratio ______ ?
5. Coplanar, concurrent forces equilibrium eqn ______.?
6. For simply supported beam with load at midspan bending moment is given by eqn _______?
7. In I.C Engine petrol efficiency is given by ________ Number?
8. Emissivity of white body at all temperature & pressure is______?
9. Rod is manufactured using ______ process?
10. In ball bearing which is harder ______ ?
11. Equilibrium eqn for non-coplanar, concurrent forces _______ ?
12. An ice cube is placed in a glass filled with water, when the ice cube melts the level of water will be ______?
13. On burning chemical fuel which energy will release _______?
14. Which has +ve displacement ________?
15. Governor hunting is ______?

Some of the questions asked in the aptitude in the previous papers are

.41-44 questions consists of simple problems , which totally depends on our observation.
For eg: 1) a)jvvjvvjvvvvv b)jvvjvvjvvvvv c)jvvjvvvjvvvv
1)a and b are alike
2)b and c are alike
3)a and c are alike
4)all are alike

2) a)4864547893 b)4864547893 c)4864547893
1)a and b are alike
2)b and c are alike
3)a and c are alike
4)all are alike

As far as the metallurgy people are concerned they can expect questions from this background

In the technical section they covered on almost all concepts like..
1.steel making
2.welding technology
3.iron making
4.mechanical working of metals
5.mechanical metallurgy
6.non-ferrous extractive metallurgy
7.heat-treatment technology
8.FTR

Overall for the mechanical engineers I seriously suggest them to concentrate on Heat Transfer, Thermodynamics, and Prouduction Techniques. By answering the questions from these sections u willl be able to pass the test very easily.

ALL THE VERY BEST TO U ALL GUYZ