Easily Measure Equal Spacings

Follow along with this example below. by rlz
Follow along with this example below. by rlz

Perhaps you've had fits trying to properly position a regular floor tile pattern in your rec room. Or maybe you struggled for hours to space those pictures down the wall in the hall. Well, here are some simple instructions that can guide you to easily measure equal spacings for such items as railing posts, stairs, paving stones, floor or ceiling tiles, light fixtures, coat hooks, pictures, and so on — even if those equal spacings end up being some strange dimension, like 4 and 23/32".

To begin with, you will need a ruler or tape measure a bit longer than the overall distance you are trying to subdivide into equal spacings. You will also need a pencil, marker, chalk, tape, stakes or other means of marking off your equal spacings as you establish them. A straightedge will also come in handy.

Next, determine how many equal spacings you wish to measure. (As our example illustrated above, let's assume that we wish to place 8 equally spaced railing posts, with a total of 7 equal spaces between them, so that the line of railing posts runs a total distance of 33 inches along a single straight line.)

On your ruler or tape measure find and make note of a distance slightly greater than your overall running distance, that is also an even multiple of your number of equal spaces. (In our example above, we will choose to mark 35 inches, which is slightly greater than the overall running distance of 33 inches, and is also an even multiple of 7 equal spaces, because 7 x 5 = 35.)

Place the marked ruler or tape measure in a taut straight line along the overall distance or gap to be spanned by the equal spacings.

Keeping the ruler or tape measure in a taut straight line, adjust the angle of that line of the ruler or tape measure until your marked or noted endpoints exactly align with the endpoints of your overall distance or gap to be spanned. (As shown in our example above, the ruler or tape measure would run at an angle to our eventual line of railing posts, so that the point marked '0 inches' aligns with one end of our spanned distance, and the point marked '35 inches' aligns with the other end of our spanned distance.)

Now, simply mark the correct number of evenly spaced increments along the angled ruler or tape measure. (In our example, to mark each of the 7 equal space increments — since 7 x 5 = 35 — we would mark at 5 inch intervals along the ruler or tape measure, at '0 inches', '5 inches', '10 inches', '15 inches', '20 inches', '25 inches', '30 inches' and '35 inches'. This would give us a total of 8 large dots positioned at 7 exactly equal spacings.)

Finally, all we need to do is extend the dotted lines shown, to shift our 8 large dots to the line of our railing posts. We now have 8 large stars or asterisks positioned at 7 exactly equal spacings, and these are the final locations of our new railing posts.

(And, by the way, in our example, those new railing posts will end up being spaced — not at 4 and 23/32" apart, as I hinted at the beginning — but in fact at 4 and 22.857/32" apart, which is an exceedingly difficult measurement to make by any other means!)

Hey, this author didn't take 7 years of college-level math, trig, calculus, and related engineering for nothing! For far more trivia, humor, history, wit, geography, comedy, art, characters, architecture, cartoons, and sheer nonsense, watch out for rickzworld and other work by Cleveland-area architect Rick (Richard L.) Zimmerman.

More by this Author


No comments yet.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.

    Click to Rate This Article