How to Install a Laundry Chute in the Floor

DIY Laundry Chute

Install a laundry chute in the floor
Install a laundry chute in the floor | Source

Are you one of the many homeowners who has their laundry downstairs? Do you hate having to walk down the stairs lugging dirty laundry to your laundry room? Why not save yourself time and energy, by installing a laundry chute in the floor of your closet.

Not only can installing a laundry chute in your home provide convenience, but it can also increase the value of your home. Many homebuyers appreciate conveniences and the laundry room is no exception.

Installing a laundry chute in the floor is easy and does not take a lot of supplies. Here are somes tips and tricks to installing a laundry chute safely and easily in the floor of your closet.

Laundry chute with swinging trap door
Laundry chute with swinging trap door | Source

Things to Consider when Installing a Laundry Chute in the Floor

Before you start building your laundry chute in the floor of your home, here are a few things you should consider first.

  • Check with your state and local building codes to see if there are any regulations to laundry chutes in homes
  • Determine the route - make sure to take the time to determine the best route for your chute. The best route is the most direct, but you want to be aware of the placement of electrical wiring, plumbing, and ductwork before you start cutting
  • Design with safety in mind - if there are small children or small pets in the household, the laundry chute in floor may not be the best choice. A raised laundry chute with a locking door is best for these households

Locking latch and eyehooks
Locking latch and eyehooks | Source

Alternative Materials

We chose to use sanded wood with a polyurethane sealer but here are a few alternative materials:

  • Melamine
  • Sheet Metal
  • Drywall

Tools & Materials Needed

Here is a list of the tools and materials we used to make our laundry chute in the floor of our closet.

Tools

  • Circular Saw (a.k.a Skil Saw)
  • Craftsman Cordless Screw Gun
  • Carpet Knife
  • Staple Gun
  • Sandpaper
  • Paint Brush

Materials

  • 1 inch Screws
  • 4 inch Hinges
  • 1 x 2 Wood Slats
  • 1 x 4 Wood Slats
  • Metal Eye Hooks and Locking Latch
  • Carpenter Staples
  • Polyurethane Sealer

Laundry chute opening in floor
Laundry chute opening in floor | Source

How to make a Laundry Chute in your Floor

We chose to make a laundry chute in the closet floor of our master bedroom. Because our closet is located right above the laundry area in the basement, we decided to forgo a chute style and use a laundry hold with a trap door.

First, we checked to make sure there wasn't any plumbing or wiring in the way of the laundry chute opening and then used the carpet knife to cut an X in the carpet where the laundry chute opening would be.

Pulling the carpet out of the way, we then used the circular saw to cut a rectangular hole roughly 6.5 in by 12 in. Then we took the staple gun and folded the carpet on each side and stapled them to the bottom of the subfloor. This keeps the chute opening smooth so as not to snag clothing.

Building the Laundry Hold

To build the laundry hold we chose to use sanded wood with a polyurethane seal because we were not using a chute, but just a temporary hold so we wouldn't have to worry as much about snagging clothes. We built the box using 1 x 2's, 1 x 4's, 2 4 inch hinges, and a ton of 1 inch screws.

The hinges were placed on the bottom of the laundry hold on one side and the eyehooks and locking latch were placed on the other. This allows the trap door to be locked into place to hold the weight of the clothes, then when you are ready to do laundry you can release the latch and the door swings open dropping the dirty laundry into your laundry basket.

More by this Author


Comments 2 comments

Novel Treasure profile image

Novel Treasure 4 years ago from US Author

Lol I know! If only getting it back upstairs were just as easy!


Kerry43 4 years ago

I continue to be amazed by the ideas I find on here. This is excellent! We are about to move our laundry appliances down into the basement, so this is a great guide. I think I will be able to do this myself. I also hadn't though about it adding value to our home. Good point! Now, if I can just work out another device to get it back upstairs I will be a happy camper ;)

Interesting, thanks!

Kerry

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working