Installing Modern Bathroom Vanities and Vessel Sinks

Bathroom Decor Ideas

When it comes to remodeling a bathroom, it is always a good idea to do your best to save money where you can. While you will be looking for good deals, you never want to go with too cheap of a product in order to make sure that your bathroom turns out to be a room to be proud of. Where can a person save a large amount of money though? The answer to that would be to do the work without the assistance of a hired contractor. While a hired contractor can usually do a great job installing your modern bathroom vanities, there is no reason you are not able to do that job on your own.

Modern Bath Vanity and Quality Manufacturing.

Contemporary bathroom vanities are really no different than the older models, at least in terms of the installation process. You will want to make sure that you are taking great care when installing your modern vanity so that you are not making any costly mistakes. This is especially true for those installing glass because of how fragile the glass will be. One small slip or one mistake you could very well find yourself out of hundreds of dollars.

One of the important things to do is to make sure that your preparation stages are done properly. By taking the proper measurements, you are helping to ensure that the entire process runs smoothly. Measuring does not just mean the height and the width of the vanity, as you will also have to measure where your pipes will be coming through in order to know exactly where to drill the holes in the vanity.

The installation process!!!

Now that you are ready to install your modern vanity, make sure that you are first removing the doors. This will help to make sure that there are no damages caused to the doors during the installation process. Once you have the contemporary vanity in place you will want to make sure that it is completely level. If you find that one side is a little lower than the other then it is a simple fix. Simply place a wood shim under the vanity in order to level it out. Now that it is completely level, you can fasten it to the wall, making sure that you are drilling into studs in order for the modern vanity to be held in place correctly.

Once it is all fastened and everything is in place, you will want to double check to make sure that the vanity remained level. There could have been some shifting during the installation of the vanity so you will want to be careful of that.  If there is a spot that is not level, you will want to unfasten it and correct the issue. There is no reason for it to be not level. Since you are doing the job yourself, you have the ability to make sure that it is done right.

Looks Great, and at the right price.

Now that you have the modern bathroom vanity in place you will be glad that you took the time and energy needed in order to finish the project. And think about the hundreds of dollars you saved by installing it on your own.

More by this Author


Click to Rate This Article
working