Templates for Wallpapering and Electrifying Your Dollhouse-Part 3

I use Kiltz to prime the raw wood or MDF.  I prime the corner with a small foam brush.
I use Kiltz to prime the raw wood or MDF. I prime the corner with a small foam brush. | Source
I prime the big sections with a foam roller.
I prime the big sections with a foam roller. | Source
Source
Everywhere there is a circle cut out of the template, I put the template on the wall and pencil in the circle.
Everywhere there is a circle cut out of the template, I put the template on the wall and pencil in the circle. | Source
I run the tape through the middle of each whole drawn on the wall.  Make as few turns as possible.  Where there is a turn in the wire tape, put electrical tape over the turn.
I run the tape through the middle of each whole drawn on the wall. Make as few turns as possible. Where there is a turn in the wire tape, put electrical tape over the turn. | Source
Put template over wallpaper and mark tape wire holes.
Put template over wallpaper and mark tape wire holes. | Source
For more information check out my wallpaper Hub. http://hubpages.com/hub/How-I-Wallpaper-My-Miniature-Dollhouse-Walls
For more information check out my wallpaper Hub. http://hubpages.com/hub/How-I-Wallpaper-My-Miniature-Dollhouse-Walls | Source

More by this Author


Click to Rate This Article
working