Knowing When to Give Up Your Pair of Work Boots

Obvious Dent

But, let’s face it: there will come a time when you need to part with them.

The question is, when?

If you are too oblivious to recognize that it is time for you to say goodbye to your work boots, then let the following tips help you determine when to turn your old boots in – before the situation becomes worse.

Yes, steel toe boots are made to protect your feet from rolling or falling objects. But if you detect a dent on the toe cap, then it is time to throw it out. After all, it is a sign that your work boots are compromised. In case something falls on your feet again, it might not be able to provide the protection it was capable of before.

If you refuse to replace your work boots simply because of a mere dent, you can conduct an X-ray on the work boot to determine if it’s safekeeping features are intact – or if they have been compromised.

Visible Part of the Steel Toe

Apart from a dent, a peek-a-booing part of the steel toe is a sure fire sign that you need to replace your work boots. According to experts, a good shoe is one with a continuously-covered steel toe. So if you see any part of the steel toe, it means the boots have to go.

Worn Away Outsole Pattern

More than just the steel toe, another thing you should check in your work boots is its out-sole pattern. If it is worn away, you should consider buying another pair of work boots. The damaged outsole pattern means that the standard for impact compression might have been reduced.

Impact on Metatarsal Guard

Just like the steel toe, if a heavy object has dropped over your metatarsal guard, it means that you have to change your work boots.

Torn Leather or Exterior Covering of the Metatarsal Guard

Similar to the steel toe, the metal that makes the metatarsal guard should not be visible. So if the leather or exterior covering of the metatarsal guard is already torn, then it is time to throw the boots out.

‘Unconducive’ Conducive or Static Footwear

In worksites where conducive or static footwear is required, the shoes need to be checked with a testing machine before the job is started. If your work boots fail this test, then it is a sign for you to buy another pair.

Work boots - like us humans – have limited time in the world as well. So before you endanger yourself with the perils of a run-down shoe, make sure to keep the aforementioned points in mind. for more information on best work boots you can visit bestworkbootsformen.com

Contaminated/Damaged Soles

The sole helps determine the effectiveness of conducive, static and electrical work boots. As such, if the sole bears contaminants that can affect electrical conduction, like that of screws, nails and metal shavings, it has to be replaced. Other warning signs that can compromise your work boots include puncture holes and cuts.

More by this Author


No comments yet.

    Sign in or sign up and post using a HubPages Network account.

    0 of 8192 characters used
    Post Comment

    No HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your articles or other sites.


    Click to Rate This Article
    working