How to Choose and Install an Indoor Outdoor Wireless Thermometer
Keep Tabs on Conditions With an Indoor Outdoor Wireless Thermometers
Indoor outdoor wireless thermometers allow you to easily monitor conditions both inside your home and outside. The base station display will give you temperature information at a glance without having to install any wiring. In fact, many of these devices will monitor humidity and barometric pressure as well.
This page will provide tips for mounting/installing the remote sensor and guide you in choosing the right wireless thermometer for your needs.
Choosing an Indoor Outdoor Wireless Thermometer
There are a number of features you should consider when choosing a indoor outdoor wireless thermometer. Here are some important ones.
The display on the base that remains indoors should be large enough to read from a distance. A backlight can also help make it more readable. The base should display both indoor and outdoor temperatures.
- Measuring Temperature
The base unit should come with wireless remote sensors to allow it to sense the temperature in a given location. Some of these devices will come with a single remote sensor while others may have 3 or more, allowing you to monitor a variety of locations. Some of these devices use 915MHz transmission and others 433.92MHz transmission. Either should work adequately, but the sensors and the base unit must operate off of the same frequency.
The various thermometers can measure temperatures within a specified range. They are all adequate for most locations, but for extremes, you'll want to check out the stated temperature range. In addition, some thermometers will display both Celsius and Fahrenheit readings, so if this is desired, look for this feature.
The wireless temperature sensors will operate as long as they are placed within range of the base station. Be sure you know where you want to monitor the temperature to be sure the particular thermometer you're considering will be able to provide the needed range. The range stated by manufacturers is generally based on open air; no obstructions. If there are walls in between, this will cut the range by at least 1/3. Metal, in particular, will block the signal.
- Tabletop or Wall Mounted
Either one can be a good choice, but certainly a table top base station is more easily re-located.
- Other Features
Some indoor outdoor wireless thermometers also read humidity and barometric pressure. Using this, they may also provide a weather forecast. Some will even provide an alert for extreme conditions like ice or extreme temperatures. Many may also provide a clock or even an alarm clock with snooze function. Some of these are radio controlled "atomic" clocks that help assure the accuracy of it's time function. Some devices also have memory for the highest and lowest temperature. This can, for instance, allow you to check back and determine how low the temperature got overnight while you were sleeping.
A Few Tips About Mounting Your Wireless Sensors
Mounting the sensors properly is critical to assure your indoor outdoor wireless thermometer functions accurately. Most of these sensors will operate in cold, heat, and damp/foggy conditions. However, it is best to mount them where they aren't directly exposed to rain.
When determining where to locate your sensor, it's wise to place them within the operating range of the base station. The manufacturer will list this distance, but having walls or other objects obstructing the signal between the base station and the remote sensor can cut this distance by 1/3 or more. You need to keep this in mind. The fewer obstructions, the better. Metal buildings and any devices/equipment that use the same frequencies should be avoided completely.
The remote sensor should also be placed so that it is has plenty of distance from any heat sources, such as a dryer vent, fireplace, air conditioner, and so forth. The sensor also should be mounted out of direct sunlight which could increase the temperature it senses significantly, making it an inaccurate reading.
The sensor can also absorb heat and cold from any structure on which it is mounted. Thus, leaving some space between the structure and the sensor is best.
Comments 1 comment
More by this Author
Sometimes your desk, chair, or bed is just too low to be comfortable or safe. You don't have to buy new furniture. A good set of bed risers is an affordable and effective solution.
Music can make the time pass more quickly. But when you're on a worksite, in a garage, or somehwere similar you need something that can stand up to the dangers. A jobsite radio can do this and more.
Many remember the classic rock of the 60s and 70s, but only some of us remember those instrumental hits that left a quieter but significant impression on music history. Relive them here.