ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

Polymer Clay Charm Ideas

Updated on January 28, 2016

Improve this Hub!

What would you like to see more of?

See results

Here are some great tips and tutorials for making that I have come across around the web as well as some of my own charm tutorials.

I'll be updating this Hub as I make new charms and find other useful resources for making them, but you can also check out my Clay Pinterest board for ideas and my favorite polymer clay tutorial for other types of tutorials.

Mermaid Charm

Polymer Clay Mermaid Charm
Polymer Clay Mermaid Charm

To learn how I made this mermaid charm go check out my Hub on how to make a polymer clay mermaid charm.

Baby Charm

Click thumbnail to view full-size
Polymer Clay Baby CharmPolymer Clay Baby CharmJulian and his polymer clay baby cake topper at his 1st birthday
Polymer Clay Baby Charm
Polymer Clay Baby Charm
Polymer Clay Baby Charm
Polymer Clay Baby Charm
Julian and his polymer clay baby cake topper at his 1st birthday
Julian and his polymer clay baby cake topper at his 1st birthday

I made this charm of my son when he was still just crawling around.

To make this baby charm you'll need:

  • a piece of wire
  • skintone coloured clay
  • hair coloured clay
  • a clay for the diaper
  • needle tool or whatever you'll be using to make the face
  • eye pin or wire for charm


  1. I started with the body. Roll out a ball of the diaper coloured clay and the skin tone coloured clay, roughly the same size.
  2. Cut the balls slighting off center.
  3. Attach the smaller half of the diaper coloured clay to the larger portion of the skin tone clay. You can use a small piece of wire to secure them together, but it isn't really necessary at the point.
  4. Now for the arms and legs. Starting with the arms, roll out two little worms in the skin tone colour. For the legs, roll out two worms, slightly larger than the arm worms and thick on one end and skinnier at the other.
  5. To attach the arms, bend the ends of each worm to act as hands. Then press the arms on to either side of the baby body, make sure they're as even as possible.
  6. To attach the legs, bend the worms in an S like shape. The thick part is the thigh, the skinny part at the bottom is the foot. Press the legs to either side of the diapered portion of the body.
  7. I didn't add any details to mine, but you could easily define fingers or toes with a needle tool.
  8. For the head I rolled a small ball of the skin tone clay. Then to make curly hair I pressed on little balls of the hair clay all over the head.
  9. I used a needle tool to sketch out the face and pressed on and smoothed out a tiny little spec of clay for the nose.
  10. I attached the head to the body by adding a bit or wire to secure it on and pressing down gently.
  11. To make it into a charm, eye pin or shaped piece of wire. I'd suggest adding it to the middle of the back.

For my son's birthday I made a larger one of these as a cake topper. It was actually a quick last minute thing because I had asked my husband to buy a dinosaur cake and he came back with one with CLOWNS! The ugly scary kind at that. So I made two little cake toppers quick as I could to replace the hideous clown toppers. UGH

Teddy Bear Baby Charm

Click thumbnail to view full-size
Polymer Clay Teddy Bear Baby CharmPolymer Clay Teddy Bear Baby Charm
Polymer Clay Teddy Bear Baby Charm
Polymer Clay Teddy Bear Baby Charm
Polymer Clay Teddy Bear Baby Charm
Polymer Clay Teddy Bear Baby Charm

My son, Juju, used to have this adorable bear suit I loved putting him in when it was cold. I knew he wasn't going to be able to fit in it forever, so I made this charm to remind myself of how cute he was when he was in it.

To make this charm you'll need:

  • skin tone coloured clay
  • bear suit coloured clay
  • wire
  • needle tool or whatever you want to make the face
  • eye pin or wire for charm


  1. I started with the body first. Roll out an oblong ball of the bear suit clay for the body, pinch the bottom of one side for the little tail.
  2. For the arms and legs, roll out two long worms and two short worms. The short worms are the feet, the long the arms.
  3. Position the arms where you want them and press them on the body, blending them into the body at the top. Flatten the bottom of the body lightly and press and blend in the leg worms, bending and flattening the ends slightly for feet.
  4. Roll out a small skin tone coloured ball for the head. Flatten a circle of bear suit clay and wrap the head in it, leaving the face part open.
  5. Roll out two little balls and press them on the head for ears.
  6. Use and bit of wire to secure the head on to the body when you press it on.
  7. I added a face with the needle tool. You can also add an eye pin or wire to make it a charm. Try the top of the head or back.

Mini Dragon Charms

Click thumbnail to view full-size
Purple Polymer Clay Dragon CharmPurple Polymer Clay Dragon CharmBlue Polymer Clay Mini Dragon CharmBlue Polymer Clay Mini Dragon Charm
Purple Polymer Clay Dragon Charm
Purple Polymer Clay Dragon Charm
Purple Polymer Clay Dragon Charm
Purple Polymer Clay Dragon Charm
Blue Polymer Clay Mini Dragon Charm
Blue Polymer Clay Mini Dragon Charm
Blue Polymer Clay Mini Dragon Charm
Blue Polymer Clay Mini Dragon Charm

These were a little experiment when I first started working with polymer clay (which is why they have no faces, because I wasn't really sure the best way to do that yet!). I really loved how they turned out though, they are so super cute and really not that hard to make at all!


By the way, I'm sorry for the poor images, they'll be replaced soon. I just recently moved and my camera charger has gone missing. When I find it, I'll take better pictures of these.


To make these you'll need:

  • dragon coloured clay
  • spike colour
  • horn colour
  • needle tool
  • eye pin or wire


  1. Take your dragon clay and roll out an oblong ball, then pinch one end out to make the tail. Flatten it at the bottom.
  2. Roll out four little balls for the arms and legs. Press and blend in two øf the balls to the side of the body and press the needle tool into the bottom of the arms to make indents to imply fingers.
  3. Flatten the other balls a bit and make indents to imply toes before pressing on to the bottom of the body.
  4. Roll out a small oblong bit of dragon clay and smooth it out on to the face then use the needle tool to make a line across, this is the mouth/snout.
  5. Make two horn coloured worms that are thin at the one tip and two tiny dragon coloured worms.
  6. Press the horn worms on to the head of the dragon very genty and wrap the tiny dragon coloured ones around the base. Smooth the dragon worms out on to the head.
  7. For the spikes, make little teardrop shapes with flat bottoms and attach them down the back of the dragon.
  8. Add your eye pin or wire for the charm. I suggest putting it at the top of the head.

For my blue dragon I wanted to try something different and attached a weird little upside down tear drop shape to its head. The result reminds me of the Super Milk-chan show for some reason...

Octopus Charm

Polymer Clay Octopus Charm
Polymer Clay Octopus Charm

Super easy charm to make that can be customized with paint or added features of any kind. I showed my husband's little cousins how to make these when I was babysitting and they made about a dozen.

For this you'll need:

  • octopus clay
  • whatever you'd like to add features with (paint, other clay, needle tool, etc.)
  • eye pin or wire for charm


  1. Start with a ball of clay that is slightly pinched and flattened on one end.
  2. Roll out 8 evenly sized worms.
  3. Press the little worms around the pinched and flattened part of the ball of clay. Try to space them evenly.
  4. Add any features you like.
  5. Add your eye pin or wire.

Dinosaur Charm

Polymer Clay T-Rex Dinosaur Charm
Polymer Clay T-Rex Dinosaur Charm

Another featureless charm you could easily customize.

For this you'll need:

  • dino clay
  • needle tool
  • wire
  • eye pin or wire


  1. Like with the dragon, roll out an oblong ball of clay, pinch out a tail and flatten the bottom.
  2. You'll also make the arms and legs similarly to the dragon, except the top arms are going to be skinny worms and the bottom legs are going to be attached to the sides of the body. You'll also bend the arms a bit for hands and pinch the bottoms of the legs for feet.
  3. For the head make a rounded tear drop shape and use the needle tool to make mouth and nostril indents.
  4. Attach head to the body with a bit of wire when pressing.
  5. Customize as you wish and add your charm piece.

Resources

Here are some great tips and tutorials on making your polymer clay charms the very best they can be! I wish I had seen most of these before I started experimenting because they are super informative and could have prevented me from making messy mistakes (like using sharpies on my charms T_T).

Tools to Start Making Charms

Need to Know Tips & Tricks

Polymer Clay Charm Hairstyles

How to Bake Polymer Clay

Tips on Painting and Drawing on Charms

Fix Painting Mistakes on Clay Charms

Different Clay Glazes

How to Glaze Polymer Clay Charms

Source

Comments

    0 of 8192 characters used
    Post Comment

    • pinkhawk profile image

      pinkhawk 4 years ago from Pearl of the Orient

      Really cool and cute! ^_^

    • Suzie HQ profile image

      Suzanne Ridgeway 4 years ago from Dublin, Ireland

      Hi Sam,

      What an interesting hub, I must check out more of your polymer clay hubs as I missed them and I am not familiar with them, shock horror! They are so cute and look so creative when finished. Loved the one you did of your son and showed a pic of him in the shot with the charm . . .

      Great job, lovely layout and have started following you on pinterest.

      Voted Up, Interesting, useful, Shared, Tweets & Pinned,keep them coming Sam!! Crafts are certainly a niche for you!

    • followthestray profile image
      Author

      Samantha Harris 4 years ago from New York

      Thank you!

    • followthestray profile image
      Author

      Samantha Harris 4 years ago from New York

      I haven't done many hubs on it as I'm still a polymer clay novice (though I've been sculpting for awhile). I hope I'll be able to put up more soon. I'm trying to raise money to go to Australia next year and since charms are way quicker to make than crocheting I'm thinking of using them as fundraisers. I intend to put up tutorials on everything I make. :)

    • The Unlearner profile image

      Jo 4 years ago from Isle of Wight UK

      I have just got back into fimo modelling, I really like your tutorials, the dinosaurs make me smile, well done.Thank you for sharing.

    • torrilynn profile image

      torrilynn 4 years ago

      followthestray,

      i've seen clay charms before but I didn't know

      that they were actually made from scratch

      thanks for the hub and the great information

      Voted up

    • followthestray profile image
      Author

      Samantha Harris 4 years ago from New York

      There are also ways to make charms using molds, but typically these are the flat pendant types. I've never made them that way myself. But I'll include information on it if I ever try.

    • followthestray profile image
      Author

      Samantha Harris 4 years ago from New York

      Thanks!

    • profile image

      spongey 4 years ago

      hi !!!!!

    • followthestray profile image
      Author

      Samantha Harris 4 years ago from New York

      Hello :)

    • sparkleyfinger profile image

      Lynsey Harte 3 years ago from Glasgow

      Great hub! Voted up and useful, and pinned it too! Great hub that I will refer back to many times! Thanks!

    Click to Rate This Article