ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

★ How To Hem Curves Or Circles | Fabric Sewing Tutorials & Tips ★

Updated on January 17, 2018

Different Techniques For Finishing & Hemming Edges

Sewing hems onto curved fabric edges, especially if they are tight curve shapes, requires a bit more time and know-how than a regular straight hemming job, as it is more difficult to get a crisp and clean curve than a straight fold. However, never fear! Once you know how it's done, it becomes a whole lot simpler, as you will see in my diagram DIY tutorial below.

Learning how to hem a curved line is a very important sewing skill to master, especially in dressmaking. Another feature you find in most clothes is the curved seam, which I will also talk about below.

To start off I have written an introduction to sewing hems, and listed the best online lessons for simple straight hemming techniques, in case you are a complete beginner to hem sewing or you would like to refresh your memory and knowledge. Then I have put together my own how-to, and listed some alternative tutorials you can read for different ideas on how to tackle curved material edges. And there are also some very helpful video instructions for more visual learners like myself!

I hope you find this page useful :)

Note: All diagrams on this page have been created by me.

Options For Hems

Photo by Queen Puff Puff - Click Here for more information.

Best Hem Sewing Tools

The sewing gauge is really a must-have when hemming, as it is designed for the job of measuring a set distance over and over, and is therefore ideal for measuring the distance between the fabric edge and your hem allowance.

Introduction To Sewing Hems

Tips & Info About Different Types Of Hems

Hems are produced when the edge of a piece of fabric is folded under and sewn in place in order to hide and enclose the raw edge. This makes a neat finish and prevents the material from fraying. Learning how to sew hems is a vital sewing skill, especially if you plan on making your own clothes.

The most common hems are 1/4", 3/8" or 5/8" wide so they are quite narrow usually. Sometimes smaller hems are used, for instance if a fabric is particularly fine and/or floaty, and sometimes larger hems are used where more weight is required, for instance at the bottom of curtains. If you are following a pattern or project instructions, you will be told the hem allowance to use.

Rolled hems are an example of a narrow hem, and these work well with curves if working with thin materials, particularly slippery or delicate lightweight fabrics. Rolled hems don't work well with thick fabrics. You can buy a specialized rolled hem foot attachment for your sewing machine too, which makes this type of hem even more straightforward to make.

Hems can be sewn straight or curved, and this page will provide links to the most helpful tutorials online for both of these hem types, but I'll also explain my own methods for sewing a curved hem using extremely artistic diagrams (!). I will link to information for creating curved seams too, which is where a curved fabric edge is sewn to either another curved edge or a straight edge. Curved seams you find a lot in dressmaking, for instance on the top half of fitted dresses.

Curved hems range from slightly curved, like at the bottom of a full circle skirt, to tight curves like in scalloped edges. Adding hems to a curved edge is difficult due to the edge being folded having a greater length than where it is to be sewn to. Difficult to explain, but this situation causes the excess fabric to gather together to produce a bumpy finish which doesn't look great and is hard to sew. That's why it's very handy to know some tricks and tips before trying to do this for yourself if you're unsure.

If the curve is very gradual, you may be absolutely fine if you hem like you would on a straight edge but go slowly whilst carefully moving the fabric round with your hands as it goes through the sewing machine. It may also be a good idea to use a shorter length of stitch than normal. With tighter curves, certainly read the instructions on this page first before proceeding. Most people say that pinning is essential to stop the curve moving when sewing.

Pressing any folds with an iron is extremely important when hemming, to give a crisp finish and help your sewing. Remember pressing is where you press the iron onto the wrong side of the fabric repeatedly rather than moving it along the surface like regular ironing. Always check you haven't got the iron setting too high otherwise you will ruin your fabric - and also remember to have the steam setting on.

Sewing Straight Hems & Lessons On Hemming Basics

These following tutorials are for beginners to hemming or those who would like a refresh on common techniques before attempting to sew curved hems.

A Variety Of Useful Sewing Machine Feet

It can be easy to become overwhelmed by the huge range of sewing machine feet available (and they do look a bit scarily complicated!), but I look at the different feet as fun products to experiment with. They can help you with simple and basic techniques, as well as enabling you to carry out specialized techniques like making narrow rolled hems or making buttonholes.

The Most Popular Types of Hems

The most popular hems are:

- The single fold (simple) hem where the fabric edge is simply folded under and sewn with one line of topstitches. The raw edge is usually finished beforehand with an overlocker or with zig-zag stitches.

- The double fold hem (also called the double turn-back and topstitch) is a step up from this hem and has two folds so that the raw edge is enclosed. A

- The faced hem uses single-fold bias tape/binding or hem facing, which are strips of fabric with folds. They are sewn to the fabric edge and sewn to the back of the fabric, out of sight. This method can be used on thicker fabrics to reduce bulk at the edge, can be used if you haven't left enough allowance for a regular hem, or can be used if you just like the look of it. You can use ready-made facing or make your own.

- Seam binding is where a ribbon-like strip - which can be called seam binding or hem tape - is used to attach the fabric edge to the reverse of the fabric. You can get different decorative tapes such as lace hem tape which is good for using on knit or lightweight fabrics especially. This method is particularly good for thicker fabrics like denim, plaid or tweed, as it smooths the transition between the hem and the rest of the fabric (which is much more obvious when a thick fabric is used) so it makes the finish smoother and more comfortable if the hem is on a garment such as a skirt. Also good for use on easy-to-unravel fabrics.

- A bound hem (also called a bias binding hem) is where double-fold bias binding is used to sew around a raw edge to enclose it completely. This method is mostly used for decorative edging on bags, quilts and clothes.

- Other hem types include the blind hem, the rolled hem and the narrow hem.

The faced hem, the bound hem and seam binding are ideal for curved edges. This is because the additional tapes, bindings and fabrics used in these methods are cut on the bias and so have a bit of stretch and can be shaped around curves. Rolled hems are also well suited if you are using a thin enough fabric. The narrower the hem you sew, the easier it is when dealing with curved hems.

Why Curved Hems Are More Difficult

X is a longer length than Y, which is where curved edges become trickier than those easy straight hems! One option to try to make the problem minimized is to have the difference between X and Y as small as possible i.e. have a narrow hem. A rolled hem technique is good for this.

However, this is not always possible (rolled hems are used on thin fabrics mainly) and if you're following a pattern which shows a larger hem - often single or double fold - then there is another technique you can use, as shown in diagrams below. The diagrams show the creation of a single-fold hem, but if you need to sew a double-fold hem instead, please check out my notes at the end.

The First Row Of Basting - My Technique For Sewing A Curved Hem

(- I haven't shown it in the diagram, but an optional first step is to serge or zig-zag stitch the raw edge).

- First measure your hem allowance i.e. how much fabric you are going to fold over to form the hem, with a sewing gauge or ruler. Mark this line along the curve with a special fabric marker which will wash off or fade over time, so is temporary.

- Sew a basting stitch close to the edge of the fabric. In this example I'll assume the hem allowance is 5/8" so I would baste at approx 1/4" from the edge. You can hand baste with a running stitch or you can use a long straight stitch on a sewing machine, which woul be much quicker. Use the longest stitch setting (around 5mm usually), or if you have a pre-set basting stitch on your machine use that. Do not backtack or fasten the threads at either end and leave the loose threads long enough to hold.

For more information on basting, Click Here for hand basting, and Click Here for machine basting.

The Second Row Of Basting

- Sew a second basting row just inside the hem allowance line you marked out earlier (i.e. just under 5/8" from the edge). Once again leave the end threads loose.

Gather The Curve Edge

- Carefully pull the loose end of the basting thread closest to the edge (the pink thread in the diagram) and spread out the fabric 'gathers' (folds) that form when you do this. The fabric edge will want to fold over onto the wrong side of the fabric as pulling on this thread will shorten the fabric edge which is what we want.

- Don't pull the thread more than you have to - just enough so you can lie the curve flat and even when folded over. There will be little gathers of fabric which you should try and spread across the entire edge so the gathers are of equal size and aren't bunched together.

Pressing & Pinning

- The hem should now be folded over nice and flat, with the second (blue) line of basting just inside the folded edge so it's not visible from the 'right side' of the fabric. These stitches act as a good guide for the fold.

- Press the fold in place with an iron (with the steam setting on). Don't move the iron across the fold like you would in regular ironing - just press it down repeatedly onto the fabric. This gives a crisp fold.

- Pin the curve in place by using straight pins inserted perpendicular to the edge as shown in the diagram, about 1" apart from each other. Position pins closer together if the curve is tight.


- Turn the fabric over and topstitch along the edge in line with the curved edge. Sew within the hem allowance - so in this case within 5/8", so I would topstitch at 3/8" from the edge.

Remember to remove each pin just before you get to it, as sewing over a pin can damage your machine.

- You can then carefully remove the line of basting stitches close to the fold (blue thread) using a seam ripper if you like. You can remove the other line of basting stitches (pink thread) now too, unless you have topstitched over it. This is an optional step.

Bias Tape, Hem Facing, Tape Makers & Sewing Kit

You can either buy bias tape or make your own. Bias tape is available in a limited number of colors, so making your own can be a very good choice, especially if you want to make it in the same fabric as the rest of your sewing project. Buying a bias tape maker makes the job of making the tape much quicker and easier.

Double-Fold Hems

The above technique results in a single-fold hem, however if you want to produce a double fold hem, the methods used are similar:

- Sew the first basting line along the curve of the edge, however this time the distance from the edge is slightly more important. The distance from basting line to the fabric edge should be half of your hem/seam allowance. So if your finished hem is supposed to be 1/2" wide, then half would be 1/4". Measure and mark this line first as a guide for your stitching.

- Next sew another line of basting stitches parallel to the first, to mark your hem allowance edge - so in my example this would be 1/2" from the fabric edge.

- Fold the fabric edge over onto the wrong side of the fabric along the first line of basting stitches so that this basting line then becomes the edge of the fabric. The stitching provides a guide for the fold and makes folding easier. Press this into place with a steam iron. It shouldn't be too tricky because of the small width of fabric that is being folded. If there are small gathers, try to spread them out over the curve so they don't bunch up.

- Do the same with the second basting line to create a total of two folds, concealing the raw edge of the fabric inside. The second line of basting stitches is now on the edge of the hem.

- Turn the fabric over and topstitch along the hem. In this case, the hem width is 1/4", so I would recommend topstitching at a distance of 1/8" from the edge. The result would be a narrow hem, perfect for curves.

- You can then remove the basting along the edge if you like. It should be easy enough to remove due to the long stitches used.

Curved Hems & Seams - Including a Tutorial on How to Make Bias Tape and Sew it Onto a Seam

Lace Hem Tape


Instructions For Sewing Curved Seams

Rather than sewing hems, the following tutorials are for showing you how to join convex (outward) or concave (inward) curved edges together in a seam without causing jagged edges, too much bulk and general messiness. A seam is simply how two pieces of fabric are joined together to make a bigger piece. Joining curved edges together to form a larger piece of fabric is very common in dressmaking, as there are no perfectly straight edges on a human!

It's important you don't stretch your fabric when you sew curved seams. As your fabric is cut on the curve it will stretch out of shape more easily, so treat it gently when you are pinning and sewing to avoid warping in your finished block.

Rolled Hem

Using a rolled hem foot on a sewing machine makes these hems really easy as they do the rolling for you as you sew! The foot means you can make rolled hems evenly and quickly, and the feet are available in a few different sizes depending on how wide you want the resulting hem to be.

Photo by Water Penny - click here to learn how to use a rolled hem foot on a sewing machine.

Wonder Clips - An Alternative To Pins

Clover Wonder Clips, Red, 50-Pack
Clover Wonder Clips, Red, 50-Pack
A great alternative to pins, clips are very useful for holding a higher number of fabric pieces together and can be more advantageous than pins in many instances. One ideal use of these 'wonder clips' is for holding bias binding onto the raw fabric edge before sewing, to keep it in position. Another use is for when pins are just too small or fiddly to use on thick fabrics or where there are multiple layers of fabrics to sew together. Clips hold the fabric together securely, and an advantage I particularly like is that you can't poke yourself in the finger with a clip! Sometimes I find that unless the fabrics are very thin, pins can cause the fabrics to warp or move in relation to each other as you are putting them in place. Clips solve this problem. 50 clips are provided in each pack.

Bias Binding Hem

Attaching bias binding to the edge of a quilt to create a bound hem. I like the use of hairclips to hold the binding on.
Attaching bias binding to the edge of a quilt to create a bound hem. I like the use of hairclips to hold the binding on. | Source

Top-Rated Sewing Machines

Although you can of course hem by hand, sewing with a machine is so much quicker, especially for large projects. Here is a selection of highly-rated machines priced from $85 upwards.

Do you sew clothing?

See results

Please Leave a Comment!

    0 of 8192 characters used
    Post Comment
    • profile image


      2 years ago

      Good job, really impressed, thanks a bunch

    • Fiona Jean Mckay profile image


      5 years ago from South Africa

      Thanks - this was really helpful - had to make a bunch of skirts and battled with attaching the waistband - this would have helped.

    • Elyn MacInnis profile image

      Elyn MacInnis 

      6 years ago from Shanghai, China

      This is a great idea. I have always had trouble with curved hems, and thought there wasn't much I could do about it. Now I know. Thanks!

    • Elyn MacInnis profile image

      Elyn MacInnis 

      7 years ago from Shanghai, China

      I sewed for my kids when they were little and loved it. I never did a good job on the curved parts - they always had us cut triangular pieces of fabric out. It made it easier, but I like your method better.

    • aesta1 profile image

      Mary Norton 

      7 years ago from Ontario, Canada

      This is a good tip. I like sewing but my skills are not really advanced.

    • lesliesinclair profile image


      7 years ago

      Funny, I feel like I've been tethered to the sewing machine for a week or more, but it's not because I'm making anything - rather, I'm altering clothes after a weight loss.

    • SheGetsCreative profile image

      Angela F 

      7 years ago from Seattle, WA

      Great resource for beginning to intermediate sewers.

    • Vikk Simmons profile image

      'Vikk Simmons 

      7 years ago from Houston

      I used to sew and I really wish I'd had this as a guide back then. Great information.


    This website uses cookies

    As a user in the EEA, your approval is needed on a few things. To provide a better website experience, uses cookies (and other similar technologies) and may collect, process, and share personal data. Please choose which areas of our service you consent to our doing so.

    For more information on managing or withdrawing consents and how we handle data, visit our Privacy Policy at:

    Show Details
    HubPages Device IDThis is used to identify particular browsers or devices when the access the service, and is used for security reasons.
    LoginThis is necessary to sign in to the HubPages Service.
    Google RecaptchaThis is used to prevent bots and spam. (Privacy Policy)
    AkismetThis is used to detect comment spam. (Privacy Policy)
    HubPages Google AnalyticsThis is used to provide data on traffic to our website, all personally identifyable data is anonymized. (Privacy Policy)
    HubPages Traffic PixelThis is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.
    Amazon Web ServicesThis is a cloud services platform that we used to host our service. (Privacy Policy)
    CloudflareThis is a cloud CDN service that we use to efficiently deliver files required for our service to operate such as javascript, cascading style sheets, images, and videos. (Privacy Policy)
    Google Hosted LibrariesJavascript software libraries such as jQuery are loaded at endpoints on the or domains, for performance and efficiency reasons. (Privacy Policy)
    Google Custom SearchThis is feature allows you to search the site. (Privacy Policy)
    Google MapsSome articles have Google Maps embedded in them. (Privacy Policy)
    Google ChartsThis is used to display charts and graphs on articles and the author center. (Privacy Policy)
    Google AdSense Host APIThis service allows you to sign up for or associate a Google AdSense account with HubPages, so that you can earn money from ads on your articles. No data is shared unless you engage with this feature. (Privacy Policy)
    Google YouTubeSome articles have YouTube videos embedded in them. (Privacy Policy)
    VimeoSome articles have Vimeo videos embedded in them. (Privacy Policy)
    PaypalThis is used for a registered author who enrolls in the HubPages Earnings program and requests to be paid via PayPal. No data is shared with Paypal unless you engage with this feature. (Privacy Policy)
    Facebook LoginYou can use this to streamline signing up for, or signing in to your Hubpages account. No data is shared with Facebook unless you engage with this feature. (Privacy Policy)
    MavenThis supports the Maven widget and search functionality. (Privacy Policy)
    Google AdSenseThis is an ad network. (Privacy Policy)
    Google DoubleClickGoogle provides ad serving technology and runs an ad network. (Privacy Policy)
    Index ExchangeThis is an ad network. (Privacy Policy)
    SovrnThis is an ad network. (Privacy Policy)
    Facebook AdsThis is an ad network. (Privacy Policy)
    Amazon Unified Ad MarketplaceThis is an ad network. (Privacy Policy)
    AppNexusThis is an ad network. (Privacy Policy)
    OpenxThis is an ad network. (Privacy Policy)
    Rubicon ProjectThis is an ad network. (Privacy Policy)
    TripleLiftThis is an ad network. (Privacy Policy)
    Say MediaWe partner with Say Media to deliver ad campaigns on our sites. (Privacy Policy)
    Remarketing PixelsWe may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.
    Conversion Tracking PixelsWe may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.
    Author Google AnalyticsThis is used to provide traffic data and reports to the authors of articles on the HubPages Service. (Privacy Policy)
    ComscoreComScore is a media measurement and analytics company providing marketing data and analytics to enterprises, media and advertising agencies, and publishers. Non-consent will result in ComScore only processing obfuscated personal data. (Privacy Policy)
    Amazon Tracking PixelSome articles display amazon products as part of the Amazon Affiliate program, this pixel provides traffic statistics for those products (Privacy Policy)
    ClickscoThis is a data management platform studying reader behavior (Privacy Policy)