- Arts and Design
How to Make A Wine Cork Wreath:
First drink 22 bottles of wine and save the corks!
If you have finished 22 bottles of wine, then you certainly deserve to display your accomplishment with a cork wreath of victory. No one needs to know how long it took you to drink those bottles; they just need to realize that you had the foresight to save the corks to recycle.
It is thought that the origin of the wreath had its birth in ancient Rome. It was initially worn on the head and symbolized a victory of some kind. Historians assume that the head wreath was then hung on the wall as a display and a way to show pride.
All in all, this wreath is a fun project to undertake and is also relatively easy. Why don't you make 2 and give one as a gift! You could get the recipient to help you drink the wine!
Image: MIcrosoft Clip Art edited with Piknik by me. Unless otherwise stated, all wine label and cork crafting images are mine. Please ask for permission before you use any of them. Thank you.
Use 22 corks and small jingle bells for this wine cork wreath.
Craft a 9" wine cork wreath with your saved corks:
Finished size with be between 9 and 11 inches in diameter--depends on the corks and the bells. My first poorly made wreath with the larger 3/4 inch bells was 11" wide.
(FYI--originally saw this project on Pinterest. That in turn led me to the website where I got the instructions for making the wreath.
Prep Time: depends on how long it takes you to drink 22 bottles of wine.
Total Time: depends on how long....it takes you to recover!
What you need to make this wine cork craft:
- 22 wine corks, new or recycled
- 22 jingle bells--3/8 inch diameter - important to get this size!)
- 20 guage floral wire
- ribbon and emblishments of your choice
- wire cutters (optional)
- needle nosed pliers (optional but nice to have handy)
- vise -- highly recommended for safety when drilling holes in the corks
- 1 helper who knows how to hold their liquor and a drill (optional)
- Drill 2 parallel holes 1/4 inch from the "top" and the bottom edge of the cork. Very important that the holes are going in the same direction.
- Lay out your corks in a line and thread wire thru one edge of all the corks. On the other edge, thread a bell between each of the 22 corks--this will be the outside of the wreath. Remember to leave enough wire to make a loop for a hanger or to attach a bow. Handy.
- Twist to close the ends. Add a bow or a holiday themed decoration like silk holly. If you can stand up, you are done.
Poll: How long will it take you to save up the corks for your wreath?Click thumbnail to view full-size
How many days will it take you to drink 22 bottles of wine?
Gather supplies for making the wine cork wreath!
I also recommend having a vise and a wire baking tester.
The vise is a must for holding the corks while drilling the holes. Safety first.
Drill the holes 1/4 inch from the top and the bottom of the wine corks - sorry the photo is blurry
Accurate measuring does make a difference. The holes must go in the same direction. That is why the vise is so useful. You can drill the holes in the same cork. My vise could fit 2 corks. I had the markings on the vise 1/4 inch from the top and the bottom of the corks.
Dilling the holes in the corks:
Notice that I am using a drill press. My husband inherited one from his father, and that makes me a lucky wine cork hole driller. It saved a lot of time.
Drilling the corks with a hand held drill-- - again, use a vise with the measurements for the corks.
A vise is a great tool to have! Keeps you from holding the cork in one hand and trying to hold a drill in the other.
Green 20 gauge wire worked very well to sting corks.
The bell used here is too big. I should have worn my glasses when reading my supply list!
A cake tester came in handy for this recycle project! - It cleared the drilled holes in the corks.
The wine corks kind of closed up waiting for me to thread the wire! Those naughty corks had to be poked with this cake tester to clean the holes so the wire would thread without hanging up.
Compare the wine cork wreaths
The wreath on the right is the first one I made. Remember, I used the wrong sized bell.
The wine cork wreath on the left is the second to be made. It used the correct sized bell. My husband also gave me some heavier wire to use on the smaller inside of the wreath which gave it stability. I used regular 20 gauge wire on the outside edge of the wreath with the bells.
It helped to make a big wire loop when stringing the corks for the wreath.
I found that making a big loop with the wire helped me keep it from getting crimped.
I tried using beads to make the big bells fit! - Did not work for me.
Just so I would not be wasting money, I tried to make the larger bells work with this wreath. I had some beads left over from past projects and inserted them in the smaller inside. I do not think it worked.
Final Version of Mickie_G's Wine Cork Wreath! Suitable for gift giving.
Where to send corks to be recycled:
When you have enough corks to share.
RECORK. Provides a natural wine cork recycling program. The ReCORK program is sponsored by Amorim of Portugal, the world's largest producer of natural cork wine closures. The goal is to recycle corks and to educate and inform our audiences about the crucial role cork forests play in curbing climate change. Go to this site to find out where you can recycle your corks.
How to get enough corks without getting a hangover!
If you order your wine corks from Amazon, you will not have to drink so much. Reward: no hangover and plenty of corks.
Remember, I used only 22 corks in my wreath. So, if you want to make more wreaths to give away, order accordingly.
A source on Amazon.com for corks to create crafts:
Buy plenty so you won't run out. You might discover that making a wreath is a project you will just love.
Two more wine cork wreaths to craft:
If you do not like the style of this wreath made with corks, then check out some of the websites below. I am lucky to have a husband who is retired and has nothing better to do than show me how to use his workshop to make my crafts. Some of the wreaths below only require a hot glue gun and a foam base. I wish you luck and hope you do not have trouble getting the corks.
Note: the designs below use a lot more than 22 corks. Some of the sites claim to use 200 corks!
- How to Make a Wine Cork Wreath from About.com:
Same process but more regular in placement of the corks.
- Wine Cork Wreath by Everyday a la Mode:
This project used a Styrofoam wreath base and Spanish moss as a filler between the corks that are mounted vertically from the base. Interesting look that makes a huge wreath.