ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

How to Adjust a Neutral Switch

Updated on April 20, 2018
Dan Ferrell profile image

Dan Ferrell writes about do-it-yourself car maintenance and repair. He has certifications in automation and control technology.

Source

How do you know you may have a problem with the neutral safety switch?

  • Your vehicle may start in any position other than Park or Neutral
  • Backup lights don't come on when in reverse gear
  • The gear selection on the dashboard doesn't correspond with the actual shift lever selection
  • The vehicle only starts in Neutral
  • Your vehicle may not start at all



In automatic transmissions, the neutral safety switch (also known as starting safety switch) is a normally open switch that works as a security device that keeps the starting system from operating while the transmission is in gear. The vehicle should start when the shift selector is in Park or Neutral.

Besides this function, on newer vehicle models the switch also turns the back-up lights on and off and communicates with the car and body computers about gear positioning.

In manual or standard transmissions, a clutch safety switch or starter/clutch interlock switch accomplishes this goal by requiring the driver to fully depress the clutch pedal to start the engine.

When the safety switch fails, you can do a series of tests and see if it is just a matter of adjustment (adjustable types), or you actually need to replace it. Depending on the particular set up or configuration of your switch, you can test it with a small jumper wire, a test light or a digital multimeter (DMM).

Just jump to the appropriate section for your vehicle, automatic or manual transmission switches, and start checking your stitch.

Index
Tools You'll Need
I. Checking a Neutral Switch on an Automatic Transmission
II. Checking a Neutral Switch on a Standard Transmission
What if my Switch Tests Okay?

Tools You'll Need

On a manual transmission:
- Voltmeter
- Small jumper wire

On an automatic transmission:
- Ratchet
- Socket set
- Standard screwdriver
- Phillips screwdriver
- Floor jack — if necessary
- Jack stands — if necessary
- 2 wooden blocks — if necessary

Neutral safety switch next to the selector stick.
Neutral safety switch next to the selector stick. | Source

I. Checking a Neutral Switch on an Automatic Transmission

Before you try to adjust the switch, you can do a couple of preliminary tests that can give you a clue about the condition of the switch. Although not a definitive test, it will serve you as an additional check for the procedures that follow:

  • depress the brake pedal and hold it there during the test
  • turn the ignition key to the 'Start' position (as if you were to start the engine) and hold it there
  • move the shift selector through the different positions
  • if the engine starts in a position other than Park or Neutral, most likely the switch needs adjustment.
  • if the engine starts only in Neutral, probably the switch needs replacement.


If the engine doesn't crank in any position, try the next test, first in Park and then in Neutral:

  • position the shift selector in Park/Neutral
  • turn the key to the Start position
  • wiggle the shift selector without moving it out of Park/Neutral
  • if the vehicle doesn't start, hold the selector forward (when in Park only) and try to start the engine


If you are able to crank or start the engine, probably the Neutral switch needs to be adjusted.


A) Locating the Neutral Switch

The neutral safety switch on an automatic transmission (also known as a park/neutral position switch or neutral start switch) is usually mounted to one side of the shift lever (top of the transmission), around the base and near the bottom (front-wheel drive models); other models have the switch attached to the left side of the transmission itself (rear-wheel drive). The switch is operated by the shift linkage.

If you don't know what the neutral switch looks like in your vehicle model, here are three options to know what you're looking for:

  • consult the service manual for your particular car make and model. If you don't have the manual, look for a copy in the reference section of your local public library. Or, better yet, buy your own copy of the repair manual. You'll find an inexpensive aftermarket service manual at most auto parts stores or at Amazon. The manual comes with maintenance, troubleshooting and repair procedures for many systems and components, with step-by-step directions and photos to make your repairs easy.
  • visit an auto parts store online and search for the neutral safety switch for your vehicle. Most Web stores provide images or photographs for most items in their catalog. This way you'll know what exactly you're looking for.
  • stop by an auto parts store in your area and ask them to show you the neutral switch for your particular model. Most of the time, they'll also let you know where you'll find the switch in your car.

B) Accessing the Neutral Switch

If your neutral switch is located next to the shift lever:

  • unscrew and lift the part of the console assembly surrounding the base of the lever to gain access to the switch. You may need a standard and Phillips screwdrivers and a ratchet for this.


If your switch is mounted on the transmission:

  • park your car on a level surface.
  • raise the front of your vehicle using a floor jack
  • push a jack stand on each side of the car and align them under the frame
  • lower the vehicle until it rests on the jack stands
  • apply the parking brakes
  • block the rear wheels with a couple of wooden blocks.



C) Adjusting the Neutral Switch

Once you've gained access to the switch, double check that your transmission is set to Park. You may need to use the following adjusting procedure or the next, depending on your application.

Adjusting the switch by sliding the switch:

  1. Loosen the switch's mounting bolts just enough so that you can move the unit sideways. Use a ratchet and socket of the correct size for this. On some models you may need a special, inexpensive tool you can find in most auto part stores.
  2. Ask an assistance to turn and hold the ignition key in the start position, as if trying to fire up the engine. Advise your helper to release the key as soon as the engine begins to turn.
  3. Then, slide the switch towards the Park or Neutral position.
  4. As soon as you hear the engine cranking, hold the switch in position and tighten up the mounting screws.
  5. Once you have secured the switch in place, start the engine with the shift lever in Park and once more in Neutral to confirm that the switch operates properly.
  6. When finished, replace the console assembly or lower your car off the jack stands.

Source
Depending on your application, a neutral safety switch may be adjusted.
Depending on your application, a neutral safety switch may be adjusted. | Source

Adjusting the switch by aligning the marks. Refer to the above schematic:

  • Once you've loosened the switch, locate the basic neutral mark/line to the right or center of the switch, depending on your application.
  • Place the shift selector in Neutral
  • On the switch, align the neutral line with the gap/groove inside the lug nut (pivot point) at the bottom of the switch.
  • When both lines align lengthwise, tighten the switch just enough to secure the switch in the aligned position.
  • Try to start the engine in both Neutral and then in Park


If the engine starts, tighten the switch mounting bolt to the torque specification indicated in your repair manual (usually 48 in-lbs, [5 Nm]); otherwise, try readjusting the switch. If this is not possible, make sure there's a problem in the starting circuit or the switch itself has failed, continue with the following tests.

Trying to adjust the neutral switch may not work. The vehicle refuses to start. Probably the switch has failed or there's a problem in the starting circuit. To confirm whether the switch is still working, do the following test. You may need to look up the wiring diagram for the switch connector to identify both the wire where voltage comes in, and the wire where voltage goes out. The wiring diagram in the repair manual.

To test the switch:

  • Unplug the electrical connector from the neutral switch
  • Using a small jumper wire, jump the terminal of the connector that gets battery power, and the terminal of the connector that leads to the starter solenoid.
  • Position the gear selector in Park or Neutral.
  • Try to start the engine


If the engine starts this time, you need to replace the neutral switch; otherwise, continue with the next test.

On some models, it's possible to back probe the switch using a test light or digital multimeter. Using the wiring diagram from your repair manual, locate the wire(s) for the incoming voltage and outgoing voltage to the starter solenoid.

  • Hold the ignition key to the 'Start' position
  • Touch the voltmeter black lead to a good ground. Or connect your test light to a good ground.
  • Back probe the output voltage wire in the switch with the red lead from your voltmeter or your test light probe.
  • If the voltmeter readout shows battery voltage, or the test light illuminates, but the engine doesn't start, the switch is good and the problem is in the rest of the starting circuit.
  • If there's no voltage present, make sure the switch is receiving battery voltage. Back probe the wire where voltage comes into the switch.
  • If there's no voltage coming in, check that part of the starting circuit; otherwise, replace the switch.

Checking a Transmission Range Sensor

Many newer vehicle models have a transmission range (TR) sensor. The TR sensor can be an analog or digital type. An analog TR sensor can be checked with an ohmmeter. Follow the instructions in your repair manual to check the appropriate connections and compare the resistance values to the specifications. Checking a digital TR type sensor may require a scan tool. If necessary, consult your repair manual.

In the next video a neutral safety switch is disassemble and can give you some clues about what can go wrong with a switch.

A typical interlock safety switch.
A typical interlock safety switch. | Source

II. Checking a Neutral Switch on a Standard Transmission

On vehicles with a manual transmission the safety switch is usually called a starter/clutch interlock switch. The clutch pedal controls the switch, which closes only when the clutch pedal is fully depressed to allow the starter motor to operate.

  1. First, locate the safety switch. Depending on your particular vehicle make and model, you'll find the switch around the top of the clutch pedal arm or as part of the push rod that connects between the clutch pedal and the brake master cylinder.
  2. Unplug the electrical connector from the safety switch.
  3. If the connector has two wires, use a small jumper wire to connect both terminals of the connector; if there's only one wire, use a jumper wire to connect the terminal of the connector to a good ground.
  4. Make sure the transmission is in Neutral.
  5. Try to start the engine.

If the engine starts, you may need to replace or adjust (adjustable types) the switch. If the engine doesn't start, there could be a problem with the starting circuit or one of its components.

You can also test the switch using a voltmeter:

  1. Set your DMM voltmeter to test for continuity — usually the lowest range on the Ohms scale. If your voltmeter doesn't come with a continuity feature, just set you meter to the lowest resistance range.
  2. Unplug the switch electrical connector.
  3. Turn on your voltmeter and touch one lead to one terminal on the switch and the other lead to the other terminal.
  4. Your voltmeter should not beep, indicating there's no continuity. Alternatively, the display on the meter should indicate infinity (OL) resistance. If so, continue with the next step.
    • If there's continuity or there's a minimum of resistance — usually in the thousandths — replace the safety switch
    • If you have an adjustable type switch, try to adjust it following the procedure described in your repair manual. Then, repeat steps 2 and 3. If the switch passed this test, continue with the next steps
  5. Repeat step 3. This time, though, keep the clutch pedal fully depressed.
  6. Now, your voltmeter should beep indicating continuity. Alternatively, your meter's readout should indicate minimum resistance; otherwise, replace the switch.
    • However, if there's no continuity and you have an adjustable switch — check your repair manual — try to adjust it and repeat step 5.

The next video shows a simple way to backprobe a clutch interlock switch.

What if my Switch Tests Okay?

A neutral safety switch out of alignment or worn out is not uncommon. Operation of the shift selector, vibration during engine operation, and dealing with road imperfections while moving down the road, all create the ideal conditions for the shift linkage to wear down and for the neutral switch to come loose and get out of alignment or fail. If you have an automatic transmission and the switch seems to be operating properly, check the shift linkage. On manual transmissions, if your interlock switch seems to be working properly, most likely the problem is with the starting circuit or one of its components.

Test Your Knowledge of Neutral Safety Switches

view quiz statistics

© 2015 Dan Ferrell

Comments

    0 of 8192 characters used
    Post Comment

    No comments yet.

    working

    This website uses cookies

    As a user in the EEA, your approval is needed on a few things. To provide a better website experience, hubpages.com uses cookies (and other similar technologies) and may collect, process, and share personal data. Please choose which areas of our service you consent to our doing so.

    For more information on managing or withdrawing consents and how we handle data, visit our Privacy Policy at: https://hubpages.com/privacy-policy#gdpr

    Show Details
    Necessary
    HubPages Device IDThis is used to identify particular browsers or devices when the access the service, and is used for security reasons.
    LoginThis is necessary to sign in to the HubPages Service.
    Google RecaptchaThis is used to prevent bots and spam. (Privacy Policy)
    AkismetThis is used to detect comment spam. (Privacy Policy)
    HubPages Google AnalyticsThis is used to provide data on traffic to our website, all personally identifyable data is anonymized. (Privacy Policy)
    HubPages Traffic PixelThis is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.
    Amazon Web ServicesThis is a cloud services platform that we used to host our service. (Privacy Policy)
    CloudflareThis is a cloud CDN service that we use to efficiently deliver files required for our service to operate such as javascript, cascading style sheets, images, and videos. (Privacy Policy)
    Google Hosted LibrariesJavascript software libraries such as jQuery are loaded at endpoints on the googleapis.com or gstatic.com domains, for performance and efficiency reasons. (Privacy Policy)
    Features
    Google Custom SearchThis is feature allows you to search the site. (Privacy Policy)
    Google MapsSome articles have Google Maps embedded in them. (Privacy Policy)
    Google ChartsThis is used to display charts and graphs on articles and the author center. (Privacy Policy)
    Google AdSense Host APIThis service allows you to sign up for or associate a Google AdSense account with HubPages, so that you can earn money from ads on your articles. No data is shared unless you engage with this feature. (Privacy Policy)
    Google YouTubeSome articles have YouTube videos embedded in them. (Privacy Policy)
    VimeoSome articles have Vimeo videos embedded in them. (Privacy Policy)
    PaypalThis is used for a registered author who enrolls in the HubPages Earnings program and requests to be paid via PayPal. No data is shared with Paypal unless you engage with this feature. (Privacy Policy)
    Facebook LoginYou can use this to streamline signing up for, or signing in to your Hubpages account. No data is shared with Facebook unless you engage with this feature. (Privacy Policy)
    MavenThis supports the Maven widget and search functionality. (Privacy Policy)
    Marketing
    Google AdSenseThis is an ad network. (Privacy Policy)
    Google DoubleClickGoogle provides ad serving technology and runs an ad network. (Privacy Policy)
    Index ExchangeThis is an ad network. (Privacy Policy)
    SovrnThis is an ad network. (Privacy Policy)
    Facebook AdsThis is an ad network. (Privacy Policy)
    Amazon Unified Ad MarketplaceThis is an ad network. (Privacy Policy)
    AppNexusThis is an ad network. (Privacy Policy)
    OpenxThis is an ad network. (Privacy Policy)
    Rubicon ProjectThis is an ad network. (Privacy Policy)
    TripleLiftThis is an ad network. (Privacy Policy)
    Say MediaWe partner with Say Media to deliver ad campaigns on our sites. (Privacy Policy)
    Remarketing PixelsWe may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.
    Conversion Tracking PixelsWe may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.
    Statistics
    Author Google AnalyticsThis is used to provide traffic data and reports to the authors of articles on the HubPages Service. (Privacy Policy)
    ComscoreComScore is a media measurement and analytics company providing marketing data and analytics to enterprises, media and advertising agencies, and publishers. Non-consent will result in ComScore only processing obfuscated personal data. (Privacy Policy)
    Amazon Tracking PixelSome articles display amazon products as part of the Amazon Affiliate program, this pixel provides traffic statistics for those products (Privacy Policy)