- Automotive Aftermarket Parts & Modifications
How to Install a Mesh Grille on a 2011-2012 Infiniti G25
2011-2012 Infiniti G25 Mesh Grille Upgrade
Tools and Preparations
The installation process of the 2011 through 2012 Infiniti G35 EZ mesh grille should take no more than thirty minutes from start to finish. However, this estimate is only accurate if you have adequately prepared yourself and your work area.
Work Area Preparations:
As always, you will want to spread out a tarp or sheet on the ground next to you or positon a folding table adjacent to the front of the car that you can use as your staging area. By doing so you will ensure that no damage will be done to the mesh grille or the radiator cover you will remove from the vehicle during installation. ALso, having all of your necessary tools and supplies in one area is a great way to use your time more efficiently and complete the job quickly.
- Black electrical tape or a roll of matte black vinyl film to cover OEM grille
- A Phillips head screwdriver
- A socket wrench
Whenever you work on any vehicle you should always use protective eyewear. This helps to prevent any objects that may chip or be violently dislodged during installation from causing you blindness or injury.
Step 1 - Remove All Bolts from the Radiator Cover
Open the hood of the vehicle. Using your socket wrench, remove all bolts from the radiator cover.
Step 2 - Remove All Rivets from the Radiator Cover
Remove all rivets from the radiator covers as well.
Step 3 - Remove Bolts on Either Side of the Panel
Remove bolts on either side of the panel using your socket wrench.
Step 4 - Remove Bolts on Both Sides of Fluid Tank
Remove bolts on both sides of fluid tank.
Step 5 - Take Radiator Cover Off
Take radiator cover off in order to access the rear side of the OEM chrome grille shell.
Step 6 - Cover the Chrome Grille Shell with Black Tape
Step 7 - Center EZ Mesh Grille on OEM Shell
Center and install APS EZ wire mesh grille on the stock grille shell.
Step 8 - Use Washer and Tab to Affix EZ Mesh Grille
Using supplied washer and tabs, affix mesh grille to the stock grille.
Step 9 - Upper Grille Installation Complete
Upper mesh grille installation is complete.
Step 10 - Remove Lower Panel Bolt
Remove bolts from lower panel.
Step 11 - Reach into Space between Radiator and Grille and Affix Grille
Reaching into the space between the radiator and the grille shell, affix the lower mesh grille over the stock grille.
Step 12 - Install Complete
- Aftermarket 2011-2012 Infiniti G25 Mesh Grille
2011 Infiniti G25 Lower Chrome X Mesh Grille is custom made by APS and designed to upgrade your 2011 Infiniti G25's front end with this premier auto accessory.
- Grille - Wikipedia
In automotive engineering, a grille covers an opening in the body of a vehicle to allow air to enter. Most vehicles feature a grille at the front of the vehicle to protect the radiator and engine.
- 2011-2012 Infiniti G25 Mesh Grille Install Video - YouTube
http://www.rvinyl.com/Custom-Grilles-NX6915S-V1.html | Infiniti G25 Sedan 2011-2012 Lower Chrome X Mesh Grille is a custom grille designed and manufactured b...