high idling on my camry '97 4 cylinder. what could be the problem? cold starts at 1800 rpm & stays
high idle is normal and should gradually come down as the water temperature rises. If it stays high, then the Idle Air Control (IAC) valve is stuck or defective. To clean it, refer my article
http://hubpages.com/hub/1997-2001-Toyot … C-Problems
by Yvonne Spence5 years ago
I love HubPages, I feel that I have learned so much here and my confidence in writing non-fiction took such a huge leap when I was invited onto the Apprenticeship program last year. I have met some wonderful people here...
by Cindy Lawson4 years ago
How is it that a hub on the 'common mistakes new hubbers make' can suddenly become not featured, in spite of the fact it has had 9 views in a day, 24 views in 7 days and 35 views in the last 30 days? I only replied to...
by Steve Andrews4 years ago
I keep on getting hubs idled despite tweaking them, changing titles and adding better keywords. I have got used to moving them to other sites such as Wizzley, Xobba and InfoBarrel but it seems to be an ongoing problem....
by Janis Leslie Evans4 years ago
I've been following the thread re: problems with the unfairness of idling hubs for low traffic. I went to FAQ and LC to find what criteria determines one getting idled. I couldn't find anything. I know it's obviously...
by Person of Interest4 years ago
http://searchengineland.com/google-pand … son-149767
by Joshbrooks510 months ago
Why didn't replacing my master cylinder fix my brake problem?I have a 2000 gmc serria. When pressed, the peddle goes almost to the floor with very little resistance but just before it hits the floor it gets hard and a...
Copyright © 2018 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.