ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

6 Easy Steps To Make A Nuc Box

Updated on March 13, 2012

DIY Nuc Plans

Beekeeping is a very rewarding hobby, just think about all that delicious, golden honey flowing, mmm! Those of us that have been keeping bees for any time knows that you eventually need to start splitting your hives to prevent them from swarming. Another advantage of splitting is to make a new hive for another beginner to start their own apiary. Perhaps you are an adventurous type and are interested in rearing your own queens.

What ever your motivation is for slitting your hives, you will need the proper equipment to do so. One of the most important pieces of equipment you will need is the box, and that is where your nucs come in very handy. A nuc is a smaller bee box that makes it easier for a fledgling colony of bees to get a strong start. The problem is that they aren't exactly cheap, especially if you are buying several at a time.

This lens is dedicated to teaching you how to make your own nucs!

It is easy

With some minor woodworking skills, you can easily make your own nucs!

Wood Cutting Pattern
Wood Cutting Pattern

Step 1: Cutting Your Wood

Making the puzzle pieces

The first step is the most time consuming, especially if you have never done this before. Once you have made a nuc or two, it starts to become a breeze. If you study the picture carefully, it has every piece laid out on a 2' x 4' piece of plywood. Personally, I use 3/4 inch plywood from Lowe's or Home Depot. I tried 1/2 but it didn't seem to hold up on the joints nearly as well. Spend a few extra dollars for the good stuff, your bees will thank you.

Let me list out the dimensions of the pieces, just in case you can't quite read them in the picture. The parts are from left to right:

2 Front Walls - 7 1/2 x 9 1/2 (you will actually get three from the cut outs)

2 Front Tops - 9 x 2 1/2 (these become the handles of the box)

2 Side Walls - 10 1/2 x 19 3/4

1 Top - 9 x 22 3/4

1 Bottom - 9 x 24 (can be shorter if you like smaller landing areas for your bees)

Once you have cut the pieces you are ready to start your assembly. Yes, that's it, no more cutting or routing or anything else!

How to start beekeeping

Here are several books that will teach you everything you need to know about beekeeping, but don't forget, join a local beekeepers guild!

Adding sides to your nuc
Adding sides to your nuc

Step 2: Adding Sides

It starts looking like a box

There are several styles of putting the box together, but it really comes down to nails or screws. Nails are a bit easier to use, but the screws will last much longer. Personally, I've chosen to put a bit more effort into it and use the screws.

One word of caution if you do choose to use screws. Due to the fact that you are driving them into the end and side of a laminated piece of wood, it is strongly advised to drill a pilot hole before you actually drive your screws. This will keep the wood from cracking. It is also advisable to drive the screws or nails as straight as you possibly can so you won't have sharp objects poking out ready to impale you. Oddly enough, this tip is more for you than your bees. You will never hear your bees mumbling about the hive about pointy objects that they stubbed their toes on, but you will certainly hear about the beekeeper that ripped his jacket and let a good number of bees sneak in and sting him!

This step would be a tad easier if you had a third arm (as many tasks would) but it really isn't that bad. All you need to do at this point is to attach the sides to the OUTSIDE edges of the front and back. It is important to attach it to the outside or your nuc won't be wide enough to accommodate the five frames you need. I usually use two screws at each joint, you may want to add a third but watch out that you don't apply too much pressure and split the wood.

Adding handles to your nuc
Adding handles to your nuc

Step 3: Adding Handles

The handles double as the frame ledge too!

The part I love most about this design is that the handles actually double as the ledge that the frames rest on. Many other designs require that you use routers or other fancy techniques, but this is much easier.

Take the smallest pieces of the cutout and place it on the front flush with the top of the sides. It will overlap slightly with the front panel and the be flush with the outside of the side walls. Screw it in place with one screw on each side. Again, you may want to add an extra screw to give you a warm and fuzzy feeling, but one usually does the trick.

Flip the box over and repeat for the back handle and ledge.

Amazon Voting

Beekeeping For Dummies
Beekeeping For Dummies

Now updated â your guide to becoming a successful backyard beekeeperInterested in raising honey bees? This friendly, practical guide presents a step-by-step approach to starting your own beehive, along with expert tips for maintaining a healthy colony. You get the latest on honey bee medication and treatments, harvesting and marketing your honey, and the impact the sudden disappearance of the honey bee has on our environment and economy.To bee or not to bee? â understand the benefits of beekeeping and whether it's right for you Build your first hive â gather the right equipment, obtain your bees, and transfer them safely to their new home Get up-close and personal â see how to open and close the hive, inspect your bees at the right times, and know what to look for Handle common problems â from swarming to robbing to pesticide poisoning, find simple solutions Understand Colony Collapse Syndrome â learn what you can do to help save the honey bees Gear up for the golden harvest â use the tools of the trade to extract honey, store it, and sell itPraise for Beekeeping For Dummies "The information a beginner needs to keep bees with confidence." â Kim Flottum, Bee Culture Magazine"A reader-friendly guide to beekeeping for novices or beginners." â Dewey M. Caron, Professor of Entomology, University of DelawareOpen the book and find:The various types of honey bees and the role each plays in a colony Hands-on instruction in building a hive How to keep bees healthier and more productive Guidelines for all phases of honey production New information on raising your own queens Plenty of helpful, illustrative pictures to guide you The safest ways to inspect and enjoy your bees A Beekeeper's Calendar organized by climate zones

 
The Backyard Beekeeper - Revised and Updated: An Absolute Beginner's Guide to Keeping Bees in Your Yard and Garden
The Backyard Beekeeper - Revised and Updated: An Absolute Beginner's Guide to Keeping Bees in Your Yard and Garden

The Backyard Beekeeper, now revised and expanded, makes the time-honored and complex tradition of beekeeping an enjoyable and accessible backyard pastime that will appeal to gardeners, crafters, and cooks everywhere. This expanded edition gives you even more information on "greening" your beekeeping with sustainable practices, pesticide-resistant bees, and urban and suburban beekeeping. More than a guide to beekeeping, it is a handbook for harvesting the products of a beehive and a honey cookbook--all in one lively, beautifully illustrated reference. This complete honey bee resource contains general information on bees; a how-to guide to the art of bee keeping and how to set up, care for, and harvest honey from your own colonies; as well as tons of bee-related facts and projects. You'll learn the best place to locate your new bee colonies for their safety and yours, and you'll study the best organic and nontoxic ways to care for your bees, from providing fresh water and protection from the elements to keeping them healthy, happy, and productive. Recipes of delicious treats, and instructions on how to use honey and beeswax to make candles and beauty treatments are also included.

 
Mysteries of Bee-keeping Explained
Mysteries of Bee-keeping Explained

Mysteries of Bee-keeping Explained is presented here in a high quality paperback edition. This popular classic work by M. (Moses) Quinby is in the English language, and may not include graphics or images from the original edition. If you enjoy the works of M. (Moses) Quinby then we highly recommend this publication for your book collection.

 
Attaching a bottom board
Attaching a bottom board

Step 4: Attaching the bottom board

Even bees need a floor

Technically speaking, this step is optional. Sometimes you want to make a second story to a nuc that you already have going. In that case you wouldn't need a bottom board at all. It will simply set on top of the current nuc just like a normal size hive has many boxes stacked on top of each other.

If you do choose to add the bottom, flip the box over and lay the bottom board on it. You need to decide which end will be the front. The extra length of the bottom board will hang over on the front end. This will eventually become the landing pad for your bees. Once again, screw this onto the box, usually one screw on the end and two on each side.

I used to screw on the front until I started ruining my drill bits in the next step. You see, if you put the screw through the center of the front then when you drill the entrance hole you will drill right through your screw. Not a pretty site seeing your bits all chewed up. With a bit of experimentation, I discovered that it doesn't really help much to even have a screw on the front.

Drilling holes
Drilling holes

Step 5: Drilling holes

The bees need a door right?

The size and location of your entrance does actually matter. First, if you ask 5 different beekeepers what the right size of entrance holes is you will probably get 6 answers. I make my entrances 3/8 of an inch for three reasons: 1) it gives them plenty of room to come and go, 2) it is small enough to defend against pests and robber bees, and 3) most rodents have trouble getting through that size of a hole when seeking shelter.

As far as the location of the front entrance, be very careful when deciding where you place it! I have heard of people leaving up to an inch between the bottom board and the hole. This plan has a solid bottom board which does not give anywhere for water drainage. If you aren't careful, you could end up with an inch of bee soup in the bottom of your hive instead of honey.

I put my front entrance as close to the bottom board as possible. This allows for adequate drainage. The rear entrance is typically an inch or so under the rear handle. I leave this room just in case I need to move the box and a handful of bees have decided to hang out on the back porch. It is important that you do drill both openings, it will provide much better ventilation for the hive.

Making the lid
Making the lid

Step 6: Making the lid

The last step!

The lid is the easiest part of the entire job. Simply take the last remaining piece and screw two pieces of scrap, that you have from the cutting step, to the ends of the top piece and **poof** you have a lid. The only mistake that I have ever made in this step was not doing a test fitting before I screwed the scraps on. It is a good idea just as a sanity check to make sure that the lid will actually fit on top before you screw them down.

Catching bees
Catching bees

Bonus Step: Adding Bees!

Here comes the fun!

While it is rewarding to be able to make your own nuc boxes, it is fairly boring to watch an empty box. Go out and find a swarm or get in touch with your local beekeeping guild so you will have some little critters that call your box a home. They will love your newest creation, I promise!

Good Nuc Boxes
Good Nuc Boxes

What makes good nuc boxes?

When you are looking at buying or building a nuc box you should consider a few things. The box should fit snugly with the lid. The last thing you want is to have a gust of wind blow the roof off of your honey bees' house. The lid should also fit flush with the rest of the hive. If there is any bowing of the lid it can lend itself to not keeping crucial heat in during winter months. The entrance should not be too large. It doesn't take much of a space for the workers to come and go, so keep it small so rodents can't get in. It also makes it easier for the bees to protect their hive.

DIY Nuc Box
DIY Nuc Box

DIY Nuc Box

Why build your own?

The answer is quite simple, it is much cheaper. The nucs that I used to buy, not counting shipping, was about $25. The ones that I make now are $3.50. Holy savings batman!

Beekeeping can become a very expensive hobby. Many people say that there is no money in keeping bees but that isn't really true. The people that shell out tons of cash are the ones that buy overpriced equipment. If you are frugal with this hobby, it will definitely pay for itself many times over.

Nuc Box as a Bait Hive

Catching wild swarms of bees

If you are looking to expand the number of bee hives that you have, a nuc box is one of the best tools you can use. Select a wooded area that is fairly easy to get access to to place your swarm box. Put a piece of old comb in the box with a few frames and strap the box about 10 feet off the ground in a tree. A swarm is more likely to pick this box than other places because it smells like an old hive was there because of the comb and because it is up off the ground.

This method can bring you a few extra hives a year if done correctly. Hey, who doesn't like free bees!

I'd love to hear from you and your experiences making your nucs. Do you have any other plans that you have had luck with? Let me know and I will feature it for you!

Have you tried making your own nuc?

    0 of 8192 characters used
    Post Comment

    • profile image

      Bash51214 5 years ago

      i really enjoyed your post.. thank you..

    • jeffrichley lm profile image
      Author

      jeffrichley lm 5 years ago

      You are more than welcome, I'm glad you enjoyed it. Are you a beekeeper?

    • profile image

      anonymous 5 years ago

      Nice instructions here, simple and to the point.

    • SayGuddaycom profile image

      SayGuddaycom 5 years ago

      I've never even thought about it!

    • Blackspaniel1 profile image

      Blackspaniel1 5 years ago

      Nice lens

    • profile image

      anonymous 5 years ago

      i wonder how many top bars this accommodate? i am a backyard beekeeper with top bar hives. dunno if i can adopt your plan to collect some swarms...

    • jeffrichley lm profile image
      Author

      jeffrichley lm 5 years ago

      @anonymous: Absolutely! This nuclei box is a great way to catch swarms. I'm getting ready to do a lens about trap boxes that I use. These are the same boxes that I useand then transfer to other hives.

    • profile image

      anonymous 5 years ago

      This is by far the most practical guide ever. Thank you! Forgive me for asking how or if you documented the harvesting part? are there steps pictured?

    • jeffrichley lm profile image
      Author

      jeffrichley lm 5 years ago

      @anonymous: Thanks for the kind words, I certainly appreciate it. The closest that I have for harvesting honey right now is Using a Honey Extractor. Take a look at that and let me know if it was what you were looking for. If not, I am going to be publishing a new one that gives much more details about getting it out of the hive and into bottles in the next few days. Hope you enjoy!

    • profile image

      anonymous 5 years ago

      Yes, this is quite close to what I was hoping for. I do look forward to the traditional way of bottling as we are aiming for a more conservative approach, homestead if you will. your mentioned nuc could fit probably 3 slots right? And how long you think It'll take to be ready for harvest? We are planning to build several for kids environmental activities..

    • profile image

      anonymous 5 years ago

      Well making a nuc box is just as easy as can "bee" with your directions....just could not resist. A great DIY.

    • profile image

      anonymous 5 years ago

      These plans look like just what I need! It's almost stupid I have to ask this (since I do keep bees -- but this will be my first time doing splits) but will this make a 4- or 5-frame nuc? THANK YOU for putting these up!

    • jeffrichley lm profile image
      Author

      jeffrichley lm 5 years ago

      @anonymous: These are 5 frame boxes but I have heard of folks just putting 4 with extra space on the sides.

    • profile image

      anonymous 5 years ago

      I just posted about this on a site called Lumberjocks, a wood working community that spans the world. These guys will build it right and maybe even throw in some nice furniture to boot.

    • jeffrichley lm profile image
      Author

      jeffrichley lm 5 years ago

      @anonymous: Very cool! I sure hope they have a great time making them. Let me know if there are any other good plans you'd like to see.

    • profile image

      anonymous 4 years ago

      Just made your nuc, all went well other than the fact that I live in England and the measurements are different for a national hive. We but in an extra support on both sides so that the frames fit. Hope it is going to work...

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: Karina, that's very cool. Let me know how it works. If you have the converted measurements, I'll post them in here.

    • profile image

      anonymous 4 years ago

      Have been looking for cheap easy plans to make, thanks for the heads up from last poster that sizes are different over here to USA Nuc boxes over here are really silly price so looking forward to giving this a go. Cheers!

    • profile image

      anonymous 4 years ago

      This is awesome!!! Thank you very much for posting. It's people like you who make the Internet a great place to find stuff.

    • profile image

      anonymous 4 years ago

      Following your instructions, i built four nucs from one sheet of plywood, saves a lot of money over buying them, thanks for the good instructions

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: Wow Ken, thank you very much. I feel honored that you feel this is that good. Makes me want to keep posting! :)

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: You are more than welcome Papa Jim. If you take a snapshot, I'll post it for everyone to see. I'd love to get a photo gallery going here!

    • profile image

      anonymous 4 years ago

      @jeffrichley lm: I'm new to all this, so after building the box, do you put frames in?

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: That's exactly right. Then you dump your bees in. As a side note, if you can get a frame of brood, you are almost guaranteed to no have your bees abscond.

    • profile image

      anonymous 4 years ago

      Hello, Im in Chile and I wood want to know how to make the 4 holes of my beeframe¨s side bars, using a drill with 4 brocas. Excuseme my english..Thanks a lot.

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: Hmm, Jose I'm not sure I know which holes you are talking about. Are you talking about holes in the frames or in the box?

    • profile image

      anonymous 4 years ago

      @Bash51214: How do you feed the bees in the nuc since there's no front entrance to slide in a front feeder?

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: Ah, that is a great question! I'll make a new lens about that, but basically I made a new contraption that feeds from on top.

      I took a spare 1x4 and cut it in 4 to 5 inch sections, it takes two pieces for each hive stacked on top of each other. The bottom gets the middle cut out (to make it look like an empty square. The top gets a hole drilled in it.

      Drill a half inch hole on top of the lid towards the front of the box. But the empty square piece over the drilled hole (the drilled hole should be in the front of the square. Put the piece with the drilled hole on top of the square with the hole on the opposite end of the square from the lid hole. This is in case there is any drips, it won't go directly into the hive.

      Once assembled, put a used water bottle (with sugar water and holes poked in the lid) on top of the contraption, upside down of course. The bees will crawl out of the lid hole, scamper down the little hallway and slurp the sugar water from the holes.

    • profile image

      anonymous 4 years ago

      what do you use for frames?

    • profile image

      anonymous 4 years ago

      @anonymous: Hello Mel in Cornwall

      I'm going to try making this nuc box & I thought I'd check a couple of things with you? A) how did you get on? & B) Do Hoffman Frames fit in it?

      Many thanks

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: Typically, I use wooden frames with wax foundation. I do have friends that use the plastic frames. What ever you have on hand is good.

    • jeffrichley lm profile image
      Author

      jeffrichley lm 4 years ago

      @anonymous: They work great! I've made a ton of splits with them. I've always been amazed that they work so well and are soooo cheap!

      As far as Hoffman Frames, I've never tried them before. I did a quick look on the interwebs and didn't find the dimensions. Are they the same dimensions as a Langstroth? The only concern that I would have is if the frame is more narrow on the bottom than the top the bees may try to fill the gap in. Some pics online seem to show them in a "V" shape and some look rectangular. I've never actually seen one, what are yours like?

      If they are a "V", you could always adjust the shape of the box a bit to make a tighter fit.

    • profile image

      anonymous 4 years ago

      do you have instructions on frames and how many can your nuc hold

    • profile image

      anonymous 3 years ago

      Simply brilliant, this is a great design and thank you for posting. I will defiantly

      Be making some, my hive boxes have a rebate so as the frame sits on the ledge there is still a bee space under it, you can purchase these runners from bee suppliers in the uk so I will be adding these, but this is the best design I have seen, can't wait to get started.

    • profile image

      anonymous 3 years ago

      THERE IS A BIT ONLINE WHERE YOU CAN DOWNLOAD A DEPT OF AGRICULTURE PANS WHERE YOU CAN BUILD FOUR NUCS FROM ONE FULL PIECE OF PLYWOOD.

    • profile image

      Jon8898 2 years ago

      Brilliant NUC Box found your page at lunchtime, went to the timber store, had it made before teatime! Only one problem, being in England we use metric plywood (I used 12mm which is more than sufficiently strong) but this made the measurements wrong.

      I got round this by leaving a small lip around the floor and the roof, and placing additional double skin on the front and back walls.

      However, I was so impressed with the design I will be making another one, and this time I'll calculate my own measurements to accommodate the metric sizes. Once I've done this I'll post the dimensions here for others.

    • Terryrecruiter profile image

      Terryrecruiter 23 months ago

      awesome, had buddy text me that his mom had a swarm out front, i made the NUC in 20 minutes and was rolling to go get my first bee rescue. the moved right in... had a few hang around back door then we headed home. Thanks.. ps it held 6 racks but i only used 4 so the swarm had room

    • profile image

      Gerald brookshire 23 months ago

      Very good design. I built one in a very short time and hung it on a power pole about 10ft. up. Within 10 days i had a small swarm in it. I had used some lemongrass oil and honey comb foundation . left them in it for a couple of weeks and took it down and transferred to hive. They have done well. Thanks for posting your plans for us.

    • profile image

      suzanne 14 months ago

      holy smokes no routering or dadoing! LOVE THIS! Can't wait to get started.

    • profile image

      Ken B's 13 months ago

      Suggested add-ons to nuc lid.

      From the scrap wood:

      1. Cut 4 small pieces and attach them to

      the outside left and right corners,

      both front and back, to prevent the

      lid from sliding left to right.

      2. Attach strips of wood to the front

      and back edges of the lid to grasp

      for easy removal.

      Glue up the project before drilling pilot

      holes and driving screws.

    • profile image

      Turkeyfarmer 12 months ago

      I have caught 6 swarms so far thanks for the nuc measurements great little box

    • profile image

      Mr'B 11 months ago

      You can mount a Nuc on side of your top bar hive so you can transfer from trap to hive very simple I have 5 I built and they are healthy.

    • profile image

      Rob S 2 months ago

      How did you come up with the 3.50 cost? I can't find any ¾ plywood under $12 for a 2'x4' section. Thank you

    • profile image

      SmayWork 2 months ago

      Just found this post last night. I had a bunch of scrap pieces of concrete form plywood. Very nice stuff. Had concrete debris on the one side, so I built one of your Nuc boxes in about and hour putting the bare side facing inside. Then painted it and formed a aluminum clad top. Net cost $0.00, just a couple of hours. Hope to see if I can catch something. Thanks

    Click to Rate This Article