ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

A Guide to the Spellbreaker Inquisitor (Pathfinder)

Updated on November 16, 2012
kcmorris profile image

Kevin has been playing tabletop games for almost as long as he can remember and currently edits for Jon Brazer Enterprises.

World of Warcraft has its own spellbreakers, of course, but nobody knows how they get away with using a two-bladed sword *and* a tower shield. ;)
World of Warcraft has its own spellbreakers, of course, but nobody knows how they get away with using a two-bladed sword *and* a tower shield. ;) | Source

The Overview

Spellcasters can be some of the most difficult opponents to tackle in Pathfinder. Their wide variety of options allows them to easily lay waste to any unprepared group. To make matters worse, thematically, spellcasters are common foes in many campaigns. If your DM’s nefarious wizards have you down, you can’t go wrong with the spellbreaker inquisitor archetype (Ultimate Combat ). Specializing in surviving against spellcasters and making it difficult them to cast spells, spellbreakers are welcome allies in many parties.

At 1st level, the spellbreaker gains strong-willed, an ability every fighter and rogue should envy. Whenever the spellbreaker makes a Will saving throw against a mind-affecting spell or effect, he can roll twice and take the best result. This gives the spellbreaker an added level of protection against things like dominate person and fear and other spells that can really decimate a group. Though the spellbreaker gives up monster lore for strong-willed, the trade is most definitely worth it.

The spellbreaker gains two abilities at 3rd level that replace his bonus teamwork feats and solo tactics: defense against magic and foil casting. Defense against magic lets the spellbreaker choose a school of magic and gain a saving throw bonus against arcane spells of that school. Every four levels after that, he can choose another school and his saving throw bonus increases. We’ll take a look at your school choices for this ability in more detail below.

Foil casting makes the spellbreaker better at disrupting casting. Concentration checks made to cast defensively in his threatened area have their DCs by +2, and anytime he hits a caster with a ranged attack, all of that spellcaster’s Concentration check DCs increase by +2 for one round as well. To add icing to the cake, foil casting stacks with the Disruptive feat (which the spellbreaker can gain by choosing the Spellkiller inquisition from Ultimate Combat). With foil casting and Disruptive, the spellbreaker increases the casting defensively DC by a whopping +6. Unlike the fighter, you can’t gain the Spellbreaker feat, though.

At 20th level, the spellbreaker gives up final judgment to gain impervious: he becomes immune to all arcane spell effects of the first school he chose for defense against magic. This immunity does apply to helpful spells as well, which is why it’s important to choose your first school carefully for defense against magic (if you’re planning on playing to 20th level, anyway). Once per day, the spellbreaker can also grant this immunity to allies within 60 feet for one minute.

Arcane Schools and Defense against Magic

You should be worried about some schools of magic more than others when you’re deciding what to choose for your defense against magic ability. This is especially true if gaining impervious is likely in your campaign, since you’ll become immune to helpfulspells of your first chosen school as well as the harmful ones. The following schools are the ones you should be the most worried about:

  • Conjuration: Conjuration includes very dangerous spells like stinking cloud and cloudkill, making it a solid choice once these spells become a threat. However, most other conjuration spells don’t allow saving throws, so you may not get a lot of mileage from this choice. Choosing conjuration at 7th level can work well, as stinking cloud just became available and cloudkill might become worrisome soon. That having been said, enchantment and necromancy are probably much more dangerous spells overall.
  • Enchantment: With spells like charm person and dominate person, spellcasting enemies can turn you against your group. You’re also uniquely in a position to really hamper your own spellcasters, so you definitely don’t want to succumb to any of these spells. Other noticeable enchantment effects include hold person and confusion. If you choose enchantment for impervious, you’ll become immune to heroism, but the morale bonuses that spell grants are easily reproduced by a bard.
  • Evocation: If you find yourself taking big damage from area of effect spells because of your moderate Reflex save, evocation can be a good choice for defense against magic. The most dangerous arcane spells aren’t generally in the evocation school, though, so there are probably better schools to choose. If your DM is really fond of the spellslinger (or blasters in general), evocation can be a much stronger choice for defense against magic.
  • Illusion: Illusions can really give a group trouble under the right circumstances. If you fail a Will save against a silent image of a wall, for instance, a wizard can separate you from your party with a simple 1st level spell, all the way up to 20th level. Illusion can be a good choice for that reason alone. If you become impervious to illusion spells, you do become immune to invisibility and useful buffs like blur, so illusion probably isn’t the best choice for your first school.
  • Necromancy: Though many necromancy spells target your good saving throws, their effects can be devastating. Fear spells, death effects, and really strong debuffs (like blindness or ray of exhaustion) are all necromancy effects. Necromancy is also a great choice for your first defense against magic school, as it doesn’t have any beneficial spells you’d be sorry to lose if you ever became impervious to the school.
  • Transmutation: Most transmutation effects are beneficial, so you don’t want to choose it as your first school if gaining impervious is likely in your campaign. Better saving throws against slow and disintegrate may be useful in your game, though, if your DM’s sorcerers and wizards are fond of these spells.

Sample Build

This sample build focuses on ranged combat, as the Snapshot line (which you can take starting at level 9) allows you to make good use of both aspects of foil casting. At lower levels, before you have access to Snap Shot, though, it can’t hurt to have a melee weapon at the ready with which to threaten spellcasters with. For a domain, most spellbreakers will likely want the Spellkiller inquisition if it’s available to them because the free Disruptive feat is very hard to pass up.

Human Inquisitor (Spellbreaker) 5
Ability Scores (15 Point Buy):
Str 10, Dex 17, Con 13, Int 12, Wis 14, Cha 8
Feats and Abilities
1
Disruptive (bonus), Point Blank Shot, Precise Shot
3
Rapid Shot, defense against magic (necromancy +1)
5
Deadly Aim

After 5th level, I recommend looking into the Snap Shot line of feats, which means you’ll want Weapon Focus (a prerequisite) and Combat Reflexes (to make use of your new threatened area). Because of your lower base attack bonus, you can’t get all of these feats until 13th level, so it can definitely be worth it to instead focus on a reach weapon. As always, this build is only one possible way to use the spellbreaker.

There are also other “magic-hating” inquisitor archetypes aside from the spellbreaker, but the spellbreaker stands out as the most capable. In any campaign full of arcane enemies, you can’t go wrong with it. You’ll definitely be better equipped at dealing with such foes than the rest of your party (unless perhaps your best friend is a superstitious barbarian).

Comments

    0 of 8192 characters used
    Post Comment

    No comments yet.

    working

    This website uses cookies

    As a user in the EEA, your approval is needed on a few things. To provide a better website experience, hubpages.com uses cookies (and other similar technologies) and may collect, process, and share personal data. Please choose which areas of our service you consent to our doing so.

    For more information on managing or withdrawing consents and how we handle data, visit our Privacy Policy at: https://hubpages.com/privacy-policy#gdpr

    Show Details
    Necessary
    HubPages Device IDThis is used to identify particular browsers or devices when the access the service, and is used for security reasons.
    LoginThis is necessary to sign in to the HubPages Service.
    Google RecaptchaThis is used to prevent bots and spam. (Privacy Policy)
    AkismetThis is used to detect comment spam. (Privacy Policy)
    HubPages Google AnalyticsThis is used to provide data on traffic to our website, all personally identifyable data is anonymized. (Privacy Policy)
    HubPages Traffic PixelThis is used to collect data on traffic to articles and other pages on our site. Unless you are signed in to a HubPages account, all personally identifiable information is anonymized.
    Amazon Web ServicesThis is a cloud services platform that we used to host our service. (Privacy Policy)
    CloudflareThis is a cloud CDN service that we use to efficiently deliver files required for our service to operate such as javascript, cascading style sheets, images, and videos. (Privacy Policy)
    Google Hosted LibrariesJavascript software libraries such as jQuery are loaded at endpoints on the googleapis.com or gstatic.com domains, for performance and efficiency reasons. (Privacy Policy)
    Features
    Google Custom SearchThis is feature allows you to search the site. (Privacy Policy)
    Google MapsSome articles have Google Maps embedded in them. (Privacy Policy)
    Google ChartsThis is used to display charts and graphs on articles and the author center. (Privacy Policy)
    Google AdSense Host APIThis service allows you to sign up for or associate a Google AdSense account with HubPages, so that you can earn money from ads on your articles. No data is shared unless you engage with this feature. (Privacy Policy)
    Google YouTubeSome articles have YouTube videos embedded in them. (Privacy Policy)
    VimeoSome articles have Vimeo videos embedded in them. (Privacy Policy)
    PaypalThis is used for a registered author who enrolls in the HubPages Earnings program and requests to be paid via PayPal. No data is shared with Paypal unless you engage with this feature. (Privacy Policy)
    Facebook LoginYou can use this to streamline signing up for, or signing in to your Hubpages account. No data is shared with Facebook unless you engage with this feature. (Privacy Policy)
    MavenThis supports the Maven widget and search functionality. (Privacy Policy)
    Marketing
    Google AdSenseThis is an ad network. (Privacy Policy)
    Google DoubleClickGoogle provides ad serving technology and runs an ad network. (Privacy Policy)
    Index ExchangeThis is an ad network. (Privacy Policy)
    SovrnThis is an ad network. (Privacy Policy)
    Facebook AdsThis is an ad network. (Privacy Policy)
    Amazon Unified Ad MarketplaceThis is an ad network. (Privacy Policy)
    AppNexusThis is an ad network. (Privacy Policy)
    OpenxThis is an ad network. (Privacy Policy)
    Rubicon ProjectThis is an ad network. (Privacy Policy)
    TripleLiftThis is an ad network. (Privacy Policy)
    Say MediaWe partner with Say Media to deliver ad campaigns on our sites. (Privacy Policy)
    Remarketing PixelsWe may use remarketing pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to advertise the HubPages Service to people that have visited our sites.
    Conversion Tracking PixelsWe may use conversion tracking pixels from advertising networks such as Google AdWords, Bing Ads, and Facebook in order to identify when an advertisement has successfully resulted in the desired action, such as signing up for the HubPages Service or publishing an article on the HubPages Service.
    Statistics
    Author Google AnalyticsThis is used to provide traffic data and reports to the authors of articles on the HubPages Service. (Privacy Policy)
    ComscoreComScore is a media measurement and analytics company providing marketing data and analytics to enterprises, media and advertising agencies, and publishers. Non-consent will result in ComScore only processing obfuscated personal data. (Privacy Policy)
    Amazon Tracking PixelSome articles display amazon products as part of the Amazon Affiliate program, this pixel provides traffic statistics for those products (Privacy Policy)