- Home Improvement
My Personal Review of the Dremel, Evolution Rage Circular Saw and Sonicrafter
Three Great Power Tools for the DIY Enthusiast
The Dremel, Evolution Rage Circular Saw and Sonicrafter
Being a DIY enthusiast this is my personal review and recommendations for three great DIY Power Tools and Accessories which I frequently use and find most useful for my DIY projects around the home. In particularly, this review focuses on the:
- The Dremel (ideal for small area work) e.g. cutting the head off of a corroded bolt.
- The Evolution Rage Circular Saw (with a great sawblade that cuts through hidden nails in wood), and
- The SoniCrafter (that reaches awkward areas that other tools can't reach).
Based on years of experience and knowledge Ive included in this review article a selection of videos I made to demonstrate some of these handy, versatile and useful power tools in action. I've also included photos and my personal review for each Power Tool showcased here which I find extremely useful around the home for numerous DIY projects; and which Im sure would make great gift sets for the DIY enthusiasts.
Handy Power Tools for the Handy DIY Enthusiast
My Personal Experience of Using These Great Power Tools
As a keen DIY enthusiast I know the satisfaction from using the right tools for the right job; and the importance of using quality tools. I frequently use a wide range of small handheld tools and a selection of electrical tools to complete DIY Projects around the home, from building shelves and cupboards, redesigning alcoves and renovating kitchens and bathrooms.
So from my personal experience I know how invaluable these gift sets can be to the DIY enthusiastic. And I'm sure they'd make a great gift for many of your friends who are into a little DIY around the house and home improvement.
Used as a Sander for a Stairs Makeover
One of my DIY Projects, at the request of my wife, was to pull up the old stair carpet to use the wooden stairs without any covering; something one of our friends had done to good effect. Apart from looking good the main advantage being that rather than continually having to vacuum the stairs to keep them clean, they only need to be kept clean by sweeping; which is a lot quicker and easier.
Pulling up the carpet revealed that originally they were carpeted with the old fashioned narrow strip stair carpets that ran up the middle with both sides of the tread having been painted white.
Removing the bulk of the paint with a belt sander was easy, then to get into the corners I switched to using the Sonicrafter fitted with a sander attachment.
Stairs MakeoverClick thumbnail to view full-size
Sonicrafter with Hyper Lock and Universal Fit
I’ve had one of these for many years now and I find it an extremely useful power tool for DIY jobs that can’t easily be done by other tools; especially the saw, although it comes with a wide range of other useful attachments for various uses in tight and awkward areas.
For example I recently used to shorten a shelf support (wooden baton) while the support was still screwed to the wall; cutting the wood accurately, efficiently and quickly without damaging the wall.
The latest Sonicrafter models come with Hyper Lock and Universal Fit Systems, which not only makes using these great tools even greater. The Hyper Lock allows you to change attachments easily and quickly, almost one handed; and the Universal Fit means you can buy blades and attachments from any manufacturer, and it will still fit; and the Universal Fit is backward compatible so if you upgrade from an older model you can still use all your old attachments in the new model.
Short Demo of SoniCrafter in Use
Versatile Tool for Cutting Wood in Awkward Spaces
I made this short video clip during a recent DIY project for remodelling shelves. This demonstration of a SoniCrafter in use shows how easy and quick it is to accurately cut right through the end of a shelf support to shorten it while the wood is still screwed to the wall without damaging the wall behind.
Having used this circular saw extensively over the last few years I have found it to be very a very robust and and versatile saw that will cut almost anything with a clean and accurate cut.
And unlike many cheaper circular saws where many people advise throwing away the blade and buying a descent blade for the saw this saw comes with a top notch blade already fitted.
Evolution Rage Circular Saw
Robust Saw That Handles Hidden Nails without Damage to the Sawblade
A few years ago when I needed a new circular saw I did lots of research and found this model to be no ordinary circular saw. Unlike an ordinary circular saw, this is a multipurpose circular saw that will cut through hidden nails in old wood effortlessly and without damaging the saw blade.
In a recent DIY project I used this Evolution Rage Circular Saw to quickly and efficiently narrow the width of pine wood floorboards by cutting along the length of the wood. The great thing about this electric saw is that you can use it confidently on reclaimed wood as the blade is designed to also cut through soft metals so any hidden nails in old timber will not damage or blunted the saw blade; in fact you’ll not even notice that you’ve cut through the odd nail or two in the old recycled wood.
I have one of these, with a good supply of accessories and very handy it is too; it’s a handy tool that gets to where other tools can’t reach and do things that couldn’t be done by other tools e.g. unable to remove a screw because the head is damaged then the Dremel will cut it off quickly, easily, and cleanly; and the number of other little uses the Dremel can be put to is too numerous to mention. Needless to say, I keep my Dremel to hand and put it to good use for lots of little jobs quite frequently.
The Small Electric Tool with Hundreds of Uses
The Dremel is an invaluable specialised tool which although not for everyday DIY I often find indispensable for lots of little jobs in the home and workshop that other power tools can't do.
With a wide range of accessories this handy little tool is great for getting into those awkward spaces and saves me hours of hard work.
If you're into crafting then the Dremel also has an excellent range of attachments for engraving glass, metal, ceramic and wood.
Demo to Remodel Shelves with These Handy DIY Power Tools
This full length demonstration on remodelling old shelves and a built-in cupboard, and make new shelves to match demonstrates the use of several power tools featured in this article.
The power tools demonstrated in this video includes the Evolution Rage Circular Saw, the SoniCrafter saw, bench saw, DeWalt jig saw, a Router and bits and the DeWalt electric drill and screwdriver; and electric sander was also used but not demonstrated in the video below.
A Trio of Great Tools
Which of these tools do you, or would you, find most useful?
Showcase of Shelves Made Using These Tools
A woodworking project of mine where I made bookcase shelf units from pine floorboards for storing DVD made using the Evolution Rage Circular Saw and Sonicrafter along with other power tools featured in this review article; showcasing what can be achieved with the right tools.