ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

Antler Jewlery Display

Updated on June 27, 2012

My husband is a hunter. Some of his antler collection is very nice. Large pieces that can be displayed nicely. Other pieces though, are small broken pieces. A friend of mine sent me a picture of an antler jewlery display she wanted to make. Perfect! I told her I would make my own version and this is it.


I took a small anter piece and a slice of wood I had intended on using for a coaster.
I took a small anter piece and a slice of wood I had intended on using for a coaster.
My husband drilled though the wood and about half an inch through the bottom of the antler.
My husband drilled though the wood and about half an inch through the bottom of the antler.
I put the screw in through the bottom of the wood.
I put the screw in through the bottom of the wood.
I screwed the antler onto the nail from the top.
I screwed the antler onto the nail from the top.
Twist the antler until it is in a stable postion
Twist the antler until it is in a stable postion
As an after thought, I sprayed the wood yellow, just so it would match my bedroom.
As an after thought, I sprayed the wood yellow, just so it would match my bedroom.
Once the spray dries, add the jewelry.
Once the spray dries, add the jewelry.
The bigger the antler, the more that can be displayed.
The bigger the antler, the more that can be displayed.
I used the stand for some of my favorite rings.
I used the stand for some of my favorite rings.
Hope you enjoyed!
Hope you enjoyed!

Comments

    0 of 8192 characters used
    Post Comment

    No comments yet.