ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

How To Make Your Computer Faster With RAID 0 And Solid State Hard Drives

Updated on August 27, 2014

No matter what kind of computer you have, there will come a time when your computer will seem slow and in need of a boost in speed. While you can buy a new computer, it may not be something you can afford at the moment. Instead, a computer upgrade costs less and can be just as effective if done correctly.

Depending on what computer you have, upgrading selected components can radically increase computer speed. Buying one or a few components costs less than a whole computer and should be easier to accomplish. Not only can an upgrade be just as fast as a new computer, you can actually obtain even faster speeds.


How can i speed up my computer in the best possible way?

The best way to increase computer speed is to remove the bottleneck that limits computer performance. For most computers, the biggest bottleneck is hard drive performance. Most computer some with spinning hard drives that are much slower than other computer components such as the processor, memory and the graphics card.

For many software applications, the computer needs to wait while data is read from or written to the hard drive. You can see this while you're booting up or waiting for software applications such as 3D games to load. Making the hard drive faster should allow it to catch up with the rest of the computer that is much faster and increase computer speed overall.


Source

How to speed up my computer by upgrading the hard drive

There are several options available when it comes to upgrading your hard drive. Buying a newer hard drive is usually faster, but not radically so. To speed up hard drive performance by at least a double, you have the following options ranked by cost and complexity:

  1. Buy a second hard drive similar to the one you already have and install RAID 0 to almost double hard drive speed.
  2. Buy a solid state hard drive or SSD to replace your current hard drive with triple or quadruple the level of performance.
  3. Combine both solid state hard drives and RAID to achieve whatever speed is needed for the ultimate in hard drive performance

All three options have their pros and cons. Depending on these, you may decide which one is best for you.


Source

How to speed up a computer with RAID 0 or striping

The quickest, easiest and cheapest way to improve hard drive performance is to use RAID 0 or striping, which can roughly double hard drive performance. Most desktop computers already support the software version of the RAID and is available to almost anyone.

All you need is a second hard drive that is similar to the one you already have. They must be the same in capacity, speed and other specs or RAID 0 will not work. Once you have a second hard drive, complete the following procedure:

  • Before starting, you may want to make a backup of your hard drive just to be safe. Otherwise, simply ignore this step.
  • Install the second hard drive into your computer and make sure that all cables are securely connected. Consult your motherboard manual if you’re not sure which connectors to use.
  • Enter the BIOS, usually by pressing the DEL key when booting up, where you have to enable the RAID option instead of SATA or IDE.
  • The BIOS includes a RAID utility, a small software program, which will take over the process of installing RAID on your computer. Select RAID 0 or striping and follow the prompts whenever needed.


Beware that if one hard drive fails, the entire RAID 0 setup will fail and all your data will be lost. Make backups to protect against this. Alternatively, you may want to look into RAID 1 or mirroring to help guard against hard drive failure in a possible RAID 0+1 setup.


How do I speed up my computer with RAID 0 or striping?

Basically, what happens with RAID 0 is that the software will divide the data on your original hard drive into two halves. One half will remain on the original hard drive, while the other half will be copied onto the new hard drive.

For example, if you start out with a hard drive of one terabytes which is half full, then afterward you will have two hard drives of one terabytes each which are both a quarter full. Note that the amount of free space remains the same with RAID 0.

Once the data has been divided, you computer has two hard drives which work together in tandem. Data written or read from your hard drives can now be done almost twice as fast with RAID 0. Naturally, this results in a huge speed increase for your computer.

Note that RAID 0 is not limited to only two hard drives. You could use three or four hard drives to achieve three or more times the original performance. Naturally, this requires more space inside and your computer needs to be big enough to house them all.


Source

How to improve computer performance with a solid state drive or SSD

Buying a solid state hard drive or SSD is more expensive than buying a second hard drive. They also have less capacity available compared to traditional hard drives which come in bigger sizes. Installing and upgrading using solid state hard drives also requires more time than using RAID 0.

However, they offer several advantages over traditional hard drives:

  • Depending on the model, a solid state drive can be between three to four times as fast in writing and reading data sequentially.
  • A SSD is even faster in accessing small files, which is why computers with a SSD feel so much more responsive.
  • Unlike hard drives that spin internally, a SSD has no moving parts and is therefore much less vulnerable to accidental damage that could result in data loss.
  • Solid state hard drives also use less electricity which reduces the overall power consumption of a computer.


Performance overall will see a huge improvement with a SSD, whether it's booting up and especially with software programs that access the drive a lot. Unlike RAID 0, solid state drives are compatible with laptops and can be used to upgrade laptop performance. RAID 0 requires at least two hard drives, which is not possible in most laptops.


Source

How to install a solid state drive or SSD in a computer

The key to replacing your old hard drive with a new solid state drive is to use cloning software which will handle the migration of data on your old drive to a new hard drive. If you buy the retail version of a solid state drive, you are usually provided with a free copy of a program to use.

If you use the OEM version, you can download a free version off the Internet such as Clonezilla. Depending on what version of Windows you have, you may already have cloning software installed.

  • Once you've installed and connected both the old and new drive, you need to boot up the computer and run the cloning software.
  • The cloning software makes a duplicate of your old hard drive so that all the data now resides on your new solid state drive.
  • Once the cloning is complete, turn off the computer and remove the old hard drive. Leave only the new solid state drive.
  • Boot up your computer and it should now be working with the SSD, although much faster than before.


Please make sure that the amount of storage used on your old hard drive is less than the capacity of your new SSD. Solid state drives usually have less capacity than traditional hard drives and you cannot make a clone if there is not enough space.


How to make my computer run the fastest with both RAID 0 and solid state drives

If you want to have the absolute fastest computer, then you need to use both RAID 0 and solid state drives. For example, in a gaming computer that needs to blow everyone else out of the water, RAID 0 and solid state drives are an absolute must. To accomplish this, you can do the following:

  • First replace your old hard drive with a solid stated drive using the same procedure as mentioned above.
  • Once you've done that, you can add the second solid state drive with RAID 0 using the prior procedure outlined previously.
  • You can continue to add solid state drives to keep increasing hard drive performance to whatever level you desire.


This method is the most expensive and requires a big computer case with lots of free space. However, using this method of combining RAID 0 with solid state drives, you can achieve unheard levels of computer speed that other computers without such a setup cannot possibly match.


Comments

    0 of 8192 characters used
    Post Comment

    • profile image

      Transintl 3 years ago

      No matter what kind of computer you have, there will come a time when your computer will seem slow and in need of a boost in speed. While you can buy a new computer, it may not be something you can afford at the moment. Instead, a computer upgrade costs less and can be just as effective if done correctly.

    • profile image

      Peter 2 years ago

      Are you running a besinuss server?If not, stay clear of RAID as it's advatages are only worthwhile if there is a constant demand for data and you have a professional card with a good RAM cache.Most modern hard disks have an internal cache which is more than sufficient for regular desktop use.

    Click to Rate This Article