ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel
  • »
  • Technology»
  • Computers & Software»
  • Computer How-Tos & Tutorials

How to Reset the TCP in Windows XP Vista and Windows 7

Updated on January 28, 2015

How to reset TCP/IP stack

TCP/IP reset
TCP/IP reset

TCP/IP is Short for Transmission Control Protocol/Internet Protocol, this is a Communication Protocols used to connect Hosts on the Internet.

If the Internet on your computer is not working, you tried all the methods to resolve this problem, but still its not working then it might be a problem with TCP/IP.

TCP/IP can sometimes become damaged or corrupted.

Even after all the troubleshooting you may face the problems below:

1. IP address is not assagined even when you have assagined it manually.

2. You are getting self assagined IP address.

3. "ipconfig" command output is blank.

4. etc........

Then Resetting TCP/IP is a best option.

How to Reset the TCP in Windows XP

1. Click on Start & Run button.

2. Type Cmd

3. Type netsh int ip reset resetlog.txt in the Command Prompt shell, and then press the Enter key.

4. Restart the computer.


How to Reset the TCP in Windows Vista and Windows 7

1. Click on Start & Run button.

2. Type Cmd

3. Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as Administrator. Allow elevation request.

4. Type netsh int ip reset in the Command Prompt shell, and then press the Enter key.

5. Restart the computer.

How to Reset the TCP in Windows XP Vista and Windows 7
How to Reset the TCP in Windows XP Vista and Windows 7
How to Reset the TCP in Windows XP Vista and Windows 7
How to Reset the TCP in Windows XP Vista and Windows 7

Comments

    0 of 8192 characters used
    Post Comment

    • profile image

      trouble shooting 4 years ago

      good step by step explanation

    Click to Rate This Article