know the IP configuration of your PC
To use Internet or to communicate other PC by using LAN or Internet, every PC requires an IP. IP stands for Internet Protocol. So, it's necessary to know your IP or important IP related information. This page describes the process of finding IP of your PC using ipconfig command on your Windows machine. Just go to the following steps:
Step 1: Opening a DOS command window:
Just do the follwoing steps:
- At first, click on the Start menu.
- Then click on Run
- Type cmd on that window.
- Finally, click on OK or press Enter.
Now, you will see a black window will be appeared.
Step 2: Typing "ipconfig" command
In the MS-DOS window, type the ipconfig command to see the IP of your machine. Now you will see your IP Address, Subnet Mask and Default Gateway of your machine.
To see more information like DNS servers, Physical Address, DHCP related information etc. you have to type ipconfig /all command in the MS command prompt.
More by this Author
Solution of the Oracle installation problem on Windows 7 / Windows XP during Oracle installation start-up. Know the reasons and solution of the erro "CreateFile error 32 when trying set file time" Error During Oracle...
- 64How to check CPU temperature:A complete guide to Check CPU temperature through BIOS or software on all operating system
While CPU is running, it produces heat. CPU is an electronic device. It is very urgent to remove heat from electronic devices as soon as possible. Otherwise the internal temperature will be increased. If the device is...
- 5How to Reset/Remove/Bypass a BIOS or CMOS Password? : A Complete Guide to Reset/Remove/Bypass BIOS or CMOS Password
User level passwords are used to restrict unauthorized access of a computer. BIOS or CMOS passwords are used to prevent access to BIOS settings or to prevent PC from booting. Thus BIOS passwords are used to add or...