How do I reprogram my keyless entry pad Sears part# 00953876000
I I have a green entry button on the door opener
Hi Marion... to reprogram your keyless entry ...It is best to erase all of the programming in the machine to make sure that the old code cant be used.. To erase everything..push in and hold the green learn button for about 15 seconds..then program each your remotes. To program the remote..hold the remote button down and press and release the green button. You will jear a click and the lightbulb will flash on and then off..it is now programmed. To do the keyless..press and release the green learn button and walk to your keyless entry and enter your 4 digit code, and hold the enter button down until you see the lightbulb on the opener flash..once it flashes you have it programmed. You can only store a total of five intems in your machine..hope this helps...Joe
Copyright © 2018 HubPages Inc. and respective owners.
Other product and company names shown may be trademarks of their respective owners.
HubPages® is a registered Service Mark of HubPages, Inc.
HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.
terms of use privacy policy (0.55 sec)