Servicing throttle body and its sensor
inside your engine car
How to service Throttle Body and its sensor for better performance
The signs of a throttle body car you need to service are no pick up, idle speed high and no power to overtake.
First you need to know where the throttle body is. It is located at the end of the water intake. Once you know the position you need to open the screws that tie the intake air intake with the throttle body. Use the philips spanner to open this screw.
Remove this intake fluid from the throttle body. Look at the inside of the throttle body through the hole in the center. You will see a butterfly valve in the center of the throttle body.
Spray with the WD40 lubricants,until clean and put it back, now test your car. The RPM should at 1000k of idle time.
For better understanding watch the video here that i was created myself, recently.