ArtsAutosBooksBusinessEducationEntertainmentFamilyFashionFoodGamesGenderHealthHolidaysHomeHubPagesPersonal FinancePetsPoliticsReligionSportsTechnologyTravel

How to Make a Humus Compost Extract and Apply by Hose End Sprayer

Updated on September 3, 2013
Fishnure Solid
Fishnure Solid

Product Description

There is no need to haul and spread tons of compost to prepare your soil for planting or for extra fertilization. There is a better and less expensive way. There is a significantly different organic fertilizer on the market that greatly simplifies the fertilization process. That product is Fishnureâ„¢. Fishnure is made from fish manure, oat straw and a small amount of a special clay. The resulting product is a moist putty-like substance that readily mixes in water. The organic matter and microbes bind to the microscopic particles of clay and will remain in the soil thereby increasing the amount of organic matter in the soil. The organic matter in a mulch or regular compost will only last a few months before it is decomposed and converted to carbon dioxide.

The following will describe how to make a liquid extract from the solid material and apply it using a hose end sprayer.

Only a small amount of Fishnure is needed to provide the same fertilization and soil treatment as a much larger quantity of compost. In the following description of the application process for Fishnure we will use only 6 ounces to treat 2000 sq. ft. of lawn.

Measuring Out 6 Ounces of Humus Compost
Measuring Out 6 Ounces of Humus Compost

Step 1 – Mix the 6 Ounces of Fishnure in 1 Gallon of Water

The solid substance mixes well with a little bit of stirring. The microbes are maintained alive in the moist environment of the solid product and are ready to go to work immediately. No brewing, special brewers or microbe activators are needed.

Mixing the 6 Ounces in 1 Gallon of Water
Mixing the 6 Ounces in 1 Gallon of Water

Step 2- Pour the Mixture Into the Hose End Sprayer

After mixing pour one quart of the mixture into a hose end sprayer dispenser.

The setting on the hose end sprayer is set to the maximum dispensing rate. The one quart of mixture will treat 500 sq. ft.

Pour Mixture Into Sprayer
Pour Mixture Into Sprayer

Step 3 – Spray the Fishnure Mixture on the Area to be Treated

Mark off an area of 500 sq. ft. and move back and forth across that area until the quart of mixture is gone. This only takes a few minutes.

Spraying the Mixture
Spraying the Mixture

If there are 2 thousand square feet or less to be treated repeat steps 2 and 3. If there are additional areas to be treated repeat Steps 1 to make more mixture and then repeat steps 2 and 3 until all areas have been treated.

The entire process will go quickly and there will be no back straining lifting of heavy bags of material. The heaviest bag to be lifted weighs 8 pounds.


Comments

    0 of 8192 characters used
    Post Comment

    No comments yet.