I have a Magic Chef furnace. I replaced thr motor because the old one was bad.

  1. profile image61
    Shiloah Kingposted 2 months ago

    I have a Magic Chef furnace. I replaced thr motor because the old one was bad.

    Prior to replacing furnace motor everything worked normally. Now when I turn on the thermostat the heater burners come on as normal and the heating cycle starts. But during the heating cycle the blower motor runs for about 2 minutes then shuts off. Then after about 1-2 minutes, blower starts again. This continues all the way through the cycle. Furnace turns off after heat is met. Then fan comes on again for 2 minutes and then turns off. Do I have the correct low speed setting on blower motor or could it ve something different? I only changed the blower motor. Thanks

 
working